Question about TP-LINK Computers & Internet
My ssid not shown in conections available panel, but is shown in network centre have tried to reconfigure router with no suceess. I use a wifi connection
Posted by Anonymous on
Enable your SSID broadcast on your router, if not shown, insert SSID and/or password(if needed) manually.
Posted on Sep 02, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I've been having the same problem where even hard wiring to the router won't work. I called USR and they had me reset to factory defaults. Now three days later, the same behavior is happening. I reset to factory defaults and it works again but I don't know for how long. Maybe these things just wear out after a while...who know.
Posted on Apr 20, 2008
SOURCE: I have a 2wire 2700HG-B
The 2wire is setup with a default network key. Change the network key on the 2wire to another key or type in what you think the default network key is on the 2wire.
Posted on Jan 22, 2009
I will try to help you out with this....
Might be you tried to cinnect with the network many time thats why its keep on disconnecting,
you can delecte all the netwoks that you have in you 3G Iphone and try to connect fresh, if its still give you the same error then you need to change the channel on the router if still it wont connect I suggest you to change tehw ireless settings on you router and reconnect all the computer and you Iphone again with the new network...
Steps are below before you change any settings on teh router i would like to inform you that you will loss your wireless connection till you reconfigure and reconnect you computer with the new network again........
open the internet explorer on your wired computer
type in 192.168.1.1or you can type http://routerlogin.com
, it will prompt you for user name and password, the user name will be 'admin' and password will be 'password', make sure you type it in small case
click on the wireless settings under the heading of setup
check out another screen shot below :
a. Change Name SSID : name of your network that you want to have
b. CHANNEL : Change to 11 and if uts 11 change it to 06
c. Mode : change to G&b
d. Sceurity : Select WEP
e. Key1 ; type any 10 digit number or you can type 1020304050, as mention above as the password for your wireless network
you will able to see your wireless network name on your computer, simply select it and it will prompt you for password that will be your 10 digit number you punch in Key1
connect with it and you are ready to go with your wired and wireless connection
I hope above mention will resolve your concern.....
Posted on Oct 28, 2009
Tips for a great answer:
May 21, 2012 | HP Computers & Internet
Nov 05, 2011 | Westell Wirespeed VersaLink...
Sep 02, 2011 | D-Link AirPlus DI-524 Wireless Router
Aug 04, 2011 | Linksys Wireless-G WRT54G Router
May 14, 2011 | Computers & Internet
Feb 04, 2011 | Belkin Basic Wireless Router
May 17, 2010 | Dell Latitude X1 Notebook
Feb 03, 2017 | TP-LINK Computers & Internet
59 people viewed this question
Usually answered in minutes!