Is netgear45 compatible with hp laser jet 1102w and mac

Try:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=59553

check the fuser connection
and
check the lever located on laser assembly which controls the gate of laser assembly
this solution is for p1005, 1006, 1010 , 1020, 1102, 1102w
Hope it will help You take care

You must have a reason to open. If it's paper jam, the display will show where it is.

I had a similiar problem and was using Windows Vista which was not compatible with the XP Installation package. The onboard drivers would not work either. Check to see if your printer is compatible with your version of windows.

is your disk compatible with your hp color laser jet cm1312

Generally speaking the remanufactured carts have a lower capacity than the hp counter part. Otherwise they usually don't leak unless you go really, really cheap on it.

It is compatible, and the driver is pre-installed on XP...just go through the "add printer wizard"

Please rate me :)

1.check the cable compatibility
2.install the driver HP laser jetIII

The HP Color LaserJet 1600 does not support MAC. Support for 2600n is the starting point for MAC.

It's not good news but, it's accurate.

On the two non working computers...uninstall the printer drivers and uninstall any info about the printer reboot.reset up each indivual (the two non working ones)computer with new drivers from web.reboot and they should work.RICHARDM69