Question about Raymarine A60 Dual Function System Pack
GPS Status says NO FIX
don't no how to regain GPS status
a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to an Expert (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
To get back up and running you are going to have to reset the unit. This is from the handbook:
Note: Take care - factory reset clears allWaypoint and Route databases.
➤ To perform a factory reset:
1. Power off the unit.
2. Press and hold CLEARwhilst powering up until <Erase backup procedure>
3. Either press CLEAR to abort Factory Reset and resume normal
Power-Up or press ENTER to continue Factory Reset.
4. Press ENTER again; the unit restarts as for a first time PowerUpwith
all values reset to their original factory settings
When you hit port and have an internet connection, make sure you are running the latest software version, currently listed online as version 1.09. You can download it here:
Posted on Dec 28, 2007
SOURCE: raytheon rl70
I've had the same problem. before replacing the antenna, try to reset the antenna by removing power to the Raystar 120. Disconnect power by either turning off all batteries or disconnecting the red wire from the antenna at the point where it enters the junction box for the chartplotter. This action effectively removes all memory from the antenna and resets it to factory settings. There is a lithianium battery in GPS antenna that holds memory data in the antenna. Disconnecting the power to the antenna for a few seconds clears the memory.
This is exactly what I did and when I turned the chartplotter back on, my Raystar 120 immediately began working again.
Posted on Aug 17, 2008
I think you have a C- Map card (black colour)clean the contacts with a contactcleaner if it not works try the card somewhere else
The C-Map card have problems that they work for a while and than stops inside the card a some memorychips and they losing contact
Posted on Oct 22, 2009
Check to see if this is a power issue by connecting to shore power and fully charging your batteries overnight with instruments off. While still connected to shore power, with batteries fully charged, turn on C80 navigation system. If the loading screen comes on and does not reset, then try holding down the button immediately to the right of the red power button for at least 3 seconds to see if the system re-boots.
Posted on Apr 28, 2010
Testimonial: "Factory reset solved the problem. Soft key next to power button worked a treat!"
Tips for a great answer:
Feb 26, 2015 | Lowrance Hds 5 Hds5 Fishfinder gps Chart...
Sep 26, 2014 | Raymarine Rc435 Chartplotter
Jun 22, 2014 | Northstar Explorer 657...
Dec 10, 2012 | Navman Tracker 5500i GPS Receiver
Jun 27, 2012 | Lowrance HDS 5 Fishfinder GPS Chart...
Jun 19, 2011 | Humminbird 997c Si Combo Color Fish Finder...
Feb 08, 2011 | Lowrance HDS 5 Fishfinder GPS Chart...
May 09, 2010 | Furuno 1650wf Gps Fish Finder Combo...
Nov 06, 2009 | Furuno 1850WF Gps Fish Finder Combo...
Sep 23, 2017 | Raymarine C80 Multifunction Display
Aug 26, 2016 | Raymarine St1000 Plus Tiller Pilot
126 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: