Question about Brother XL-3030 Electronic Sewing Machine

Open Question

Replace horizontal spool holder pin - Brother XL-3030 Electronic Sewing Machine

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mountain_cra
  • 86 Answers

SOURCE: how do i take the case off my brother xr-65 to replace my spool pin and spool cap

I don't have that particular Brother but I have on that is similar.

Start by taking all of the screws out of the back that you can find (they're in deep holes, so look carefully). Then look at the bobbin area and you'll probably find one more. Finally, take the feet off of the bottom of the machine (not the presser foot, the feet that sit on the table), you'll likely find that there is a screw through the middle of the foot that also holds the case in place.

Best of luck

Posted on Sep 10, 2012

  • 1564 Answers

SOURCE: do not know how to replace spool pin and spool cap

It looks like it might just snap into place. Of course that means you have to remove the broken bits which may require a drill, small bit and needle nose pliers.

Posted on Sep 11, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The spool pin on my Brother VX1010 doesn't come up so I can't put a spool of thread on it.


Difficult to say. Some machines have a spool pin that can be pushed down for storage or transport. Your machine may have this ability. Or, perhaps someone has pushed the pin down accidentally. If you can use a needlenose plier to grab the tip and pull up, the spool pin may be fixed. If there is any part of the spool pin still projecting above the machine, you can cut a length of plastic drinking straw and fit it over the spool pin to hold your thread spool. Some sewists use a standalone thread holder (available multiple sites online, etc) that sets on the table behind the sewing machine or some people will throw the thread into a jar and set it behind the machine.

Cone Thread Holder Jo Ann

..

Jan 05, 2017 | Brother Sewing Machines

1 Answer

How to thread on a singer 4411. Thank you


To thread the upper thread, make sure that the needle bar is fully up, using the hand wheel. Put the thread spool on the spool pin and secure it with the spool holder. Use the end of the spool holder that is closest to the spool size. Bring the thread through first guide to the left of the spool holder. Slide it past and behind the guide before pulling it into the guide. Then bring the thread to the pre-tension spring. Similarly, the thread goes behind the spring and then comes forward. Next bring the thread down through the channel and up through the adjacent one further to the left. It helps to hold the thread between the spool and the thread guide. Once you bring the thread up through the second channel bring it from right to left through the slotted eye of the take-up lever. Bring the thread down and through the horizontal thread guide, the thin guide clamp needle and to the needle. Thread the needle from front to back.

The manuals for most Singer sewing machines are available from the manufacturer's site: http://www.singerco.com/support/instruction-manuals . The direct link to the manual for the 4411 is http://www.singerco.com/uploads/download/1230_4411_heavy_duty_esf.pdf . See page page 16 (page 23 of the PDF) for pictures of the guides.

I hope this helps.

Cindy Wells

Jan 05, 2017 | Singer Sewing Machines

2 Answers

How do you replace horizontal spool pin


Hi Phyllis I believe this youtube video will help you, Take care...CHEERS..
https://www.youtube.com/watch?v=abGDVhDlZLs

Mar 17, 2016 | Brother Sewing Machines

1 Answer

Horizontal spool holder


Check the local sewing repair shop to see if they can order it for you. You can also search the internet for the manufacturer, model and the word "parts" to see if there are any online suppliers for your machine. If you are creative, you may be able to jerryrig something using a plastic drinking straw, chopstick, or a wooden dowel.

...

Nov 30, 2015 | Singer 1725

1 Answer

On my CM-17C sewing machine, the thread spool falls off the horizontal holder, whether loading bobbin or sewing.


The thread spool retainer is a cheap item to replace at your local sewing machine store.

Sep 05, 2013 | Sewing Machines

1 Answer

What is the part that holds on the spool of thread called on a Singer 5050?


Do you have a manual?
I checked the online manual available on the Singer site for your model and the part you mention is called a Horizontal spool pin and holder.
If you would like a copy of the manual go to the Singer site:
http://www.singerco.com/accessories/manuals.html
Type in 5050 and click on Search.
On the next page click on Free download!
Hope this helps!

Oct 17, 2010 | Singer 5050 Mechanical Sewing Machine

1 Answer

Lost spool cap/holder


my CG550 is running very slow I need help?

Jul 09, 2010 | Singer CG550 Mechanical Sewing Machine

2 Answers

Spool Pin Broke off


Ask you local Singer dealer, be armed with the model number when you call.
Freestanding spool holders can be bought (or made.)

Sep 01, 2009 | Singer 3116 Simple

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18390 Answers

Irene Tulloch

Level 2 Expert

458 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...