Question about Yaesu FT-450D Transceiver

1 Answer

After Flash Update (v0227) will not xmit proerly

My FT450D was working fine on all modes and bands. Yaesu had a software update v. 0227. Downloaded their program and flash update. All went well, no errors after writing to rig. ON reboot, press and hold Home/Recall button while powering up to reset defaults and all went fine. Rig powered up and went to 7 MHz. Now the radio on SSB sound all garbled and cannot understand it on USB or LSB when listening in another radio - no matter what band. The CW does not xmit either. I can hear the tone in the rig, but no xmit. Rig will receive on various bands.... The Yaesu update was to cover the new 60 meter band and a few other options.. So much for their flash.

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 90 Answers

I would flash it back to the older version. Double check you have the correct firmware. This almost sounds like the incorrect version for your radio.

Posted on Sep 14, 2014

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
WV6Z
  • 7 Answers

SOURCE: PPT works in the lower bands (under 148 Mhz) but not 156 range

Your radio has not been modified to transmit outside of the amateur bands.

Posted on Jun 26, 2009

mr_merlo
  • 1 Answer

SOURCE: yaesu ftm-10e squelch problem

ftm10e is a **** radio, i have this and the sql in closed in FM mode in V e U
Yaesu = ****

Posted on Jul 31, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It just freezes up at random while playing games,listening to music,watching videos etc. please help


Hello

The Sony Playstation 3 suffers from software bugs like any other device. These bugs can cause the PS3 to freeze during game play, which takes away from the overall experience of using the PS3 hardware. In order to combat these bugs, Sony software team frequently sends out PS3 software updates that will defuse any major bugs as they arise.

Go to the official Sony Playstation 3 update website and download the latest PS3 software update. Each update that Sony releases fixes bugs and adds new features.

Connect a USB flash drive or memory card to your computer and create a folder inside of the USB drive or memory card named "PS3." Create a folder inside of that named "Update."


Save the downloaded PS3 update file inside of the "Update" folder on the USB flash drive or the memory card.


Pull the USB flash drive or the memory card out of the computer and connect it to your PS3. Select the "System Update" option from the PS3 main menu.


Select "Update via Storage Media" from the next screen and press the "X" button to install the latest PS3 update on your machine. This will fix any software bugs that are preventing your PS3 from working properly.

Sep 24, 2011 | Sony Video Game Consoles & Games

1 Answer

Mode unsupported


get a usb 1gb flash drive and download the 3.55 update from the playstation website. Hold the power button on the playstation until it beeps twice this is called a master reset. Select system update insert the flash drive with the downloaded update press select and start at the same time. then run your system as you normally would.

Jan 28, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

Blueant s4 stuck in DFU mode, does nothing, hung up while in the middle of upgrade firmware from 1.5 t 1.6 need the software to re flash it


I know this link is old but the same problem happened today to my new device a s4
I tried to update the device and the update program stopped halfway through.I tried this several times and each
time after the program stopped dead halfway through I pressed the cancel button and followed onscreen prompts,
I then noticed that the device would not respond and was just a dead piece of kit.It seems that it was still in
DFU mode(update mode)and needed the software to install an update to get it to work again.
It seems that the problem could be how the device reacts to the type of motherboard I have on my PC.BluAnt mention
issues with ASUS boards on their site wioth another device.
at the office. So after dozens of tries to get the s4 to update using the downloaded updater from Blueant,
I went into Windows Explorer and found the directory 'BluAnt Universal Updater' I copied the directory to my
memory stick and then took it home. On my PC at home I copied over the BAUU directory. Downloaded and ran the updater program
....and.....it installed the update within a couple of minutes. It seems that the update program downloads the update to a
directory within the BAUU directory and also places a 'Backup' directory there from your device, so if a problem occurs you can
tell the updater program to update from a file on your hard drive.Please pass this 'fix' on.

Dec 29, 2010 | Computers & Internet

2 Answers

I cannot get my sound to work properly on internet videos,but my audio device plays fine on other media not only on internet.


Mozilla Firefox is limited some what in playing flash content.
I recomend downloading Internet Explorer 8.
Click this link http://www.microsoft.com/uk/windows/internet-explorer/worldwide-sites.aspx

In step 2 sellect you operating system.
Then save the download to your Harddrive.
Then install by running the downloaded file, double click on it.
Please take the time to rate my expertise.
Thanks

Nov 01, 2010 | Mozilla Firefox

1 Answer

I Keep Receiving Error 80029C77 When I Try The Latest Update For MyPS3


I received this today and first I downloaded the update via the web on your computer to a USB flash drive. Once downloaded create the folders PS3 and the folder UPDATE within PS3. PS3\UPDATE. Move downloaded file into the UPDATE folder. (folders must be in CAPS). Then when the unit is off press and hold the power button until it beeps 3 times. A menu should come up on the screen. Select the option that states update system software (I believe its 6). The unit will update via the flash drive. After that the unit will restart and should be updated and working. 

Jul 27, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

Blue ray player says needs update?


Hello,

to update your player, go to the website of your player's manufacturer, (e.g, www.samsung.com, if samsung is the manufacturer of your player).

Once the site opens, go to or click software on the page, and download software update on you your PC, then burn the downloaded software into an empty disc and insert it into your player, then your player will automatically to the update from the CD.

Or, if your player has a USB, copy the downloaded software into a usb flash drive, then fix it into your player and press usb from your remote.

I hope you know how to update your player now.

Good luck.

May 21, 2010 | Element Electronics EDBCO11 Blu-Ray Player

1 Answer

Sony Ericsson G700 Smartphone's Touchscreen Panel not working


its either ur LCD touch srceen is damaged or its in d software...
try to update ur phone using the "sony ericsson update service software" it can be downloaded in www.sonyericsson.com..
if it doesnt work.. ur LCD touch screen is fucked up.. bring it to sony ericsson service center...

Dec 29, 2008 | Sony Ericsson G700 Unlocked GSM Smartphone...

2 Answers

Innovage photoviewer keychain download


My husband is now enjoying his gift. I changed USB cords and and downloaded the software from the the www.customercare.com and then connected the USB cord back into my computer and it worked fine It was easy after that. I am now getting ready to purchase one for myself. Thank You

Jun 20, 2008 | Cameras

12 Answers

Motorola flash mode


Have you tried a Master Re-set when the phone is off? Hold the center key and the power button for at least a FULL minute to a minute and a half. You will see the provider's splash screen, but hang tough.

This works best with the device on a flat surface rather than holding it.

Sep 16, 2007 | Motorola Mobility Moto Q

Not finding what you are looking for?
Yaesu FT-450D Transceiver Logo

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yaesu Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1654 Answers

Nyte_Ryder

Level 2 Expert

102 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Yaesu Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...