Question about HP Photosmart C6180 All-In-One InkJet Printer

2 Answers

I have a HP C6180 All-In-One, I am trying to set up the wireless printing. I had this enabled at my old house, I recently moved and now it will not work. When I turn on the wireless radio and try to print, the printer makes a noise and shuts off (even if I try to print a Wireless Network Test Report). After doing this the printer will not stay powered up, it keeps flashing not shut down properly and then shuts off again and again until I hard reset it. I can hold down the 6 and # keys at the same time to reset it but if I try to print wireless it does it all over again. I can print with the usb cable but I get an Ink System has failed message Error: 0xc19a0035. I need help, I don't want to buy a new printer but am considering it!!!

Posted by on

  • emerson73114 Jun 28, 2009

    After trying the above suggestion, I still have the same problem. What now?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,041 Answers

Hi

There there to much to tell you what to do but I found a link for you to see it will tell you what to do just click on the link it will take you there.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01458034&lc=en&dlc=he&cc=il&lang=he&rule=6783&product=3655608
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Posted on Feb 13, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 169 Answers

Try resetting the printer using the # and the number 6 buttons,holding them down and then inserting the power cord at the back of the printer..its a known issue with the HP printers.
you can also follow the follow the link..
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01507846&cc=us&lc=en&dlc=en

In case it doesnt you can always contact a free online technical
support with an online live techbuddies technician at
http://tinyurl.com/m7ghqz

Posted on Jun 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Radio on C6180 not working and printer won't print


Try to unninstall the driver then put it again, it should work

Dec 05, 2011 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

I've been able to print from my laptop wireless to printer HP C6180. Only lately, printer was unable to get wireless signal. My other desktop could print wireless to HP C6180. I tried uninstall driver...


In this situation your wireless printer might require a power reset before you print each document. Though the printing activity will take place efficiently you will have to physically go and power the printer to enable it to print. This problem might require you to reload the firmware of the router and set the wireless printer to manual IP address in order to make it work seamlessly no matter how many documents you have to print.

Nov 30, 2010 | HP Photosmart C6180 All-In-One InkJet...

2 Answers

My HP photosmart C6180 will not print it is wirelss and seems to have a mind of its own - it was printing just fine and does show it is on line


HP Photosmart C6180 All-In-One InkJet Printer is not printing when you are using it wirelessly. It can only happen if there is a corruption in the wireless settings of the printer. Need to reconfigure the wireless settings of the printer. If the printer is still in warranty then call 1-800-474-6836.

Do reply with the results..............................

Oct 19, 2010 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

Hp c6180 all-in one will not print manually from computer


The simpelest way to reconfigure you printer is to run the original CD or DVD that contained the installation software that HP gave you when you bought the All In one printer.
Simply put the CD/DVD in the computer..and if the install screen does not come up on it's own...go to the start button and select run. type in setup and click ...it should then cause the computer to go to the drive and run the program...follow instructions ...their will be a option you can select for either a USB/or printer cable connection.....BBill01

Jul 07, 2009 | HP Photosmart C6180 All-In-One InkJet...

2 Answers

HP C 6180 will not not print or scan


As an IT admin at a small school district I can attest to the scan in print issues via network with this model. Our eventual solution after HP provided little help was to USB it to a workstation and then share it with limited rights to users. It was most stable otherwise with only bare drivers loaded and not using any associated HP software

Apr 24, 2009 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

My HP C6180 printer will not print wireless via my laptop


Well it s a issues with the ip address on the printer and the computer.Both of them are not the same.You need to delete the printer icon and inser the cd that came with the printer and then try add a device .The printer drivers would be reinstalled and it should be ready to print and scan.
In case it doesnt you can always contact a free online technical
support with an online live techbuddies technician at
http://tinyurl.com/m7ghqz

Mar 02, 2009 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

C6180 printing slow


This could be from the image you are printing. If you are printing from a computer or memory card, the dpi (dots per inch) may be higher than some.Standard printing is typically 400dpi, and you can change the settings on your computer or the printer directly. Memory cards and some photos from your computer may be 600dpi and will likely take much longer to print since there is more "color information" that it is trying to fill.
Let me know if this helps.

Jan 24, 2009 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

HP C6180 prints but won't copy or fax...


i can not recieve faxes. It use to work fine. I can send them out, but not receive.

Jan 05, 2009 | HP Photosmart C6180 All-In-One InkJet...

Not finding what you are looking for?
HP Photosmart C6180 All-In-One InkJet Printer Logo

453 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...