Question about Xerox DocuColor 12 Printer

1 Answer

I installed a new fuser oil cartridge in my Docucolor 12. After about a week I found the oil was low again and we had only made a few hundred copies. When we pulled the unit away from the wall I found where all the oil went (nice floor polish). What can be done to stop the oil from dripping out of the copier?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 62 Answers

U need a new oil tank. this is the yellowy/brown plastic bit where the oil sits in. if not you might have a blockage in your oil system in the fuser itself causing it to spill out. if the oil is on the trays its more than likely the oil tank

Posted on Jul 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

10-342 error code


Hi there

10-342 Fuser Web Cartridge needs changing (this code should reset automatically when a new Web Cartridge is installed).

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
Manually

Feb 09, 2010 | Xerox DocuColor 12 Printer

1 Answer

DOTS pattern and WHITE LINE along the page


The Problem is your Copy Print Module it has a scracht on it if you replace the module it will desapear the dots and lines.

Nov 26, 2009 | Xerox DocuColor 12 Printer

1 Answer

DC 1250 Paper Jam when printing few copies


Well that problem is because there is not enought oil on the fuser roll. The problem is the oil pump. change it before make one irreversible damage to the fuser or pressure rolls. Do a full maintenance of the fuser module.

Apr 25, 2009 | Xerox DocuColor 12 Printer

3 Answers

Xerox docucolor 12 system fault 15-362


Fault Code 15-362 - CAUTION: The Fuser Roll remains in a cammed-up position if power to the copier is interrupted while the copier is in use. The Fuser Roll will not be released from its position until the power is restored, the Power Switch is in the On position, and the Start button is pressed again. If the Fuser Roll remains in the cammed-up position for a prolonged period of time, copy quality defects will occur. To prevent damage to the Fuser Roll, switch the Power On as soon as possible after the power is restored, and make a copy of a document. If the machine is a DC 12LP send a print job from a workstation to prevent damage to the Fuser Roll.

Apr 15, 2009 | Xerox DocuColor 12 Printer

3 Answers

Xerox docucolor 12 copy/print printing all black


Hi,
If you moved the printer, make sure the conections from the printer to the Fiery are secure. If loose the prints will be black but when copying will be fine.

Jul 19, 2008 | Xerox DocuColor 12 Printer

1 Answer

Error 10186 docucolor 12


10-186 is a fuser problem.Check for jammed paper in fuser or low fuser oil.Might have bad fuser lamp or fuser thermal fuse.

Apr 23, 2008 | Xerox DocuColor 12 Color Copier

1 Answer

Doc 12 fuser oil leaking


It needs to have the fuser taken apart and rebuilt.
There are wicks and wiper blades that wear out.
Then they do you get excessive oil on the paper and
pretty much everywhere.
If your doing it yourself I can provide you a good and reliable vendor.

Apr 07, 2008 | Xerox DocuColor 12 Printer

3 Answers

Docucolor 12 spills fuser oil


Pretty much all you can do is rebuild the fuser, either the meterins blade or wick are work out.

Mar 19, 2008 | Xerox DocuColor 12 Color Copier

2 Answers

Blank trace appears on printed copy


replace the toner cartridge, this is a case of low toner.

NOTE: you should never clean the drum on the toner cartridge it is sensitive to light and touch.

Jan 07, 2008 | HP LaserJet 1020 Printer

Not finding what you are looking for?
Xerox DocuColor 12 Printer Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Xeroxrep

Level 1 Expert

33 Answers

Philip Hughes

Level 2 Expert

72 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...