Question about Frigidaire PLEF398AC Electric Kitchen Range

1 Answer

F10 fault Frigidaire GSE3WZCSB Electric Kitchen Range shows "F10" fault and nothing works. What is that?

Posted by on

  • John Leith
    John Leith Apr 13, 2014

    This happened about 10 minutes into an oven cleaning cycle.

  • John Leith
    John Leith Apr 13, 2014

    After being "unplugged" overnight, the oven works for ordinary baking - apparently the high cleaning cycle heat caused the problem? Anyhow, yes, we decided to call a repair service. The EOC was replaced about 55 weeks ago!

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

F1 through F10 fault codes are runaway temperature codes.
If this error code is shown while the oven is in day time mode, the Electronic Oven Control (EOC) would need to be replaced. Otherwise it may be the oven temperature sensor or Resistance Temperature Detector (RTD sensor).
Sounds like you will need to contact an appliance repair technician in your area to test each to isolate the problem.

Posted on Apr 13, 2014

  • Jim Siefert Apr 13, 2014

    OK, 10 minutes into a cleaning cycle...sounds like the EOC. Standing behind my suggestion of getting a tech to test it.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 833 Answers

SOURCE: My Frigidaire range display has gone out and the oven doesn't work.

sun, first test is to power the unit down. Find the pair of breakers which are generally 40 or more amperes. Turn them both off and back on. If this doesn't fix it, you will probably need a circuit board.

Posted on Dec 13, 2007

SOURCE: One stovetop ignitor doesn't work: the gas comes out, but no clic

there is a swich behing the knob that turns on the ignition, it most be replace. every burner has one of those swiches, when you remove the knob you can see it, it's white in color about an inch long.

Posted on Dec 08, 2008

  • 39 Answers

SOURCE: F1 fault code Frigidaire electric range

all solutions on the F1 show to replace the EOC control.

Posted on May 22, 2009

  • 506 Answers

SOURCE: we have a f10 error code on our electric range

F10 is thermal runaway. The RTD is most likely bad. Open the oven door and look in the upper corners you will see a little metal rod protruding from the back of the oven, this is the RTD or resistive temperature device. A local parts store should have these.

Posted on Dec 15, 2009

  • 1 Answer

SOURCE: Frigidaire CFEF372BC2 Electric Kitchen Range keeps

I have the same problem as denversdad, any solution please

Posted on Mar 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frigidaire electric range #GLEFZ384GCA has an F10 signal, and appears to continue heating when set at 170.


Thank you for allowing me to assist you, Friend.

Typically error code F10 indicates that your Frigidaire range has detected an issue with the runaway temperature (overheating). Let's attempt reprogramming your range by either unplugging it or flipping the household circuit breaker off. It is best to wait roughly ten minutes and then turn on your range. Usually this will clear most false error codes. If issue persists, at this moment I would suggest contacting a professional to proceed further. Most likely the RTD Probe (Resistance Temperature Detector) or the EOC (electronic oven control) will need replacing. Hope this helps! - Z

Sep 14, 2014 | Frigidaire Gallery GLEFZ384GC Kitchen...

2 Answers

I AM GETTING F1 ERROR CODE ON FRIDIGEAIRE MODEL #CFEF372CS2 SERIAL # NF41924422, ONLY OVEN NOT WORKING


I am 99% positive you need a new EOC based on the fact that you said you heard the all too common pop noise. EOCs usually cost around $200-$300 and sometimes more. The EOC in this is the same as your clock, if you took off the top back you will see burn marks on the back of the clock.

Jul 04, 2014 | Frigidaire PLEF398AC Electric Kitchen...

1 Answer

Getting F10 on oven


Good Morning Kathy, this is Z. Thank you for allowing me to assist you!

If you are receiving an error code F10, it typically indicates that your Frigidaire range (FEF352) has detected an issue with the runaway temperature (overheating). Let's try reprogramming your range by either unplugging it or flipping the household circuit breaker off. This usually clears most false error codes. I suggest waiting approximately ten minutes and then turn on your range. If the error code does not clear, I would recommend contacting a professional to proceed further. Most likely the EOC (Electronic Oven Control) will need replacing. Hopes this help!

Mar 30, 2014 | Frigidaire FEF352 Electric Kitchen Range

1 Answer

My frigidaire does not heat consistently. F10 fault goes off if it's on for a couple of hours or if we broil. F10 also goes off after cleaning during cool down. F30 goes off after oven is turned off. ...


Good Morning Irene, thank you for allowing me to assist you!

The F10 and F30 error codes are in regards to an open or failed oven sensor. If the sensor and EOC has been replaced, more than likely a professional would need to inspect the wiring harness between the EOC and sensor.

Best regards!

Oct 28, 2013 | Frigidaire FEF366 Electric Kitchen Range

1 Answer

Frigidaire FEF336BC Electric Kitchen Range F7 10


The "F7 10" fault code implies the left front potentiometer/left front burner switch is open and will need to be replaced. Here is that part to order.

Mar 31, 2013 | Frigidaire FEF336BC Electric Kitchen Range

1 Answer

We have a f10 error code on our electric range frigidaire es510l what does that mean


F10 is thermal runaway. The RTD is most likely bad. Open the oven door and look in the upper corners you will see a little metal rod protruding from the back of the oven, this is the RTD or resistive temperature device. A local parts store should have these.

Dec 15, 2009 | Frigidaire PLEF398AC Electric Kitchen...

1 Answer

F1 fault code Frigidaire electric range


all solutions on the F1 show to replace the EOC control.

May 20, 2009 | Frigidaire FEF352 Electric Kitchen Range

1 Answer

My electtric frigidaire oven overheats


F 1 FAULT CODE INDICATES A FAILURE OF THE CONTROL.
REPLACE THE CONTROL(CLOCK).

Dec 19, 2007 | Frigidaire FEF336BC Electric Kitchen Range

Not finding what you are looking for?
Frigidaire PLEF398AC Electric Kitchen Range Logo

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Ismael Rodriguez...

Level 2 Expert

171 Answers

Paul Carew

Level 3 Expert

3249 Answers

Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...