- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
No, it is not a failed condenser. You need to see if the compressor is running though. When it runs you shaould have a fan in the freezer running, a fan underneath the fridge running, and the compressor should be running. I would be willing to bet that either the compressor is bad, or the start relay on the compressor.
Er-FS error code: Failure of freezer sensor. I have been finding the fuseable link in the defrost system on these models open preventing the defrost cycle. This would involve removing the freezer back panel and removing the sensor and fuse from the evaporator. It's just a plug in.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
You said, your Kenmore Elite Trio, model 795.7756 or 7757 has an error message
simply reading ER IF. No pressing of buttons, or combination thereof
changes anything. Also, the ice maker has stopped working although it
is turned on. Can anyone help? I cannot pull the refrigerator out to unplug and reboot it, thus I don't know what to do.
Try tripping the breaker off for 5 minutes and then see if this method resets the system? Do not turn it back on for at least tree minutes. That's why I said, Five!!!
Lets see how it resets while I look your fridge up. Write back. Huuum 7:11 pm eastern standard time . I'm here!
You said, I have just purchased this unit and switch it on.After some 3 minutes
error message appeared on the front door screen . Message ---- ER CF
Neither fridge,freezer or ice maker are working. What is the problem.
Did you turn the refrigerator and freezer on to the proper cooling adjustments as in the user manual? Is the ice maker hooked up to the water line and in the on position? Did you use the free help line if you are doing it your elf?
While I look it up, you can try to reset the system by plugging the
fridge for 5 minutes, or if you can not reach the plug, then throw the
breaker for 5 minutes.
Not less than 3 minutes. That is why I sad, 5minutes.
Usually this will do it! let me know as I look up the error codes.
Please remember to leave a rating!!!!!
Call this number for all Kenmore questions 1-800-4-MY-HOME One Year Limited Warranty When installed, operated and maintained according to all instructions supplied with the product, if this appliance fails due to a defect in material or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME to arrange for free repair.
Let me know how it goes! Bless You. Please remember to leave a rating! Huuum
I faced the same problem for Kenmore elite Trio Model # 795.77543600 bottom freezer refrigerator. The issue as pointed out by Medeer on fixya.com, turned out to be the part called component assembly, part number 6615JB2005H. I got this replaced yesterday but for 4 hours I did not notice any cooling... so I thought it did not work.... but then in the morning I notice that the issue has been resolved, the refrigerator is cold and there is no eR dH error message. Thanks to all who shared on this site.