Question about E-Machines eMachines Desktop PC

2 Answers

I have an eMachine that the moniter will not turn on. I run a virus scan. But cannot get the moniter the stay on. the power light is on, the screen is not working.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 688 Answers

It sounds like you monitor is getting hot and shutting of. does your monitor plug into the power supply or into a regular plug. Is it still under warranty, you could take it back and see if they will give you a new monitor.
or you could borrow a monitor from a friend and test it. if the same thing happens you can then start looking at the video card. which is probably onboard video. if you need to get a video card, I would have a tech do the install unless you think you can handle it.

Posted on Jun 17, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,653 Answers

The first thing we need to do is figure out if the problem is the computer or the monitor.

Have you got another computer around, a laptop will work too.

Posted on Jun 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Green power light comes on goes off then on again stays solid, moniter says no signal, mouse lights up, and three red lights on key board flash then nothing why?


If the monitor power light is on or flashing, but nothing displays, borrow a monitor from a friend. If that works, your monitor needs replaced.

Nov 21, 2012 | eMachines EL1852G-52W

2 Answers

LG Flatron E2042. Brand new. New CPU. Windows 7. I plugged in my new monitor today. Does not turn on automatically. But when I do turn it on I get an error message. D SUB POWER SAVING MODE and tur


Your new moniter may not be compatible with your computer. I have an Emachines that won't take a flat screen. I have to use a big bulky moniter because it says not connected even thought the hookup fits the back of the tower. That might be your problem. Did your old moniter work correctly?

Nov 15, 2012 | Computers & Internet

1 Answer

Power switch is staying in sleep mode. will not turn on or when it does turn on the moniter stays in sleep mode


use external monitor and go to control panel - power setings - here you can set up all you need

Nov 10, 2012 | E-Machines eMachines Desktop PC

2 Answers

My computer won't boot up and the orange light just stays on. The moniter is working, the fans in the power supply is working


Could be your motherboard. Does anything come up on the screen at all when you boot up? Do you hear a beep at startup? Also check to make sure your hard drive is spinning just to be sure.

Dec 09, 2011 | E-Machines Computers & Internet

2 Answers

I keep getting no signal when i turn on my emachine desk top


Its probably the power supply..they tend to go quick on emachines.!Replace the Power supply.

Jun 11, 2010 | E-Machines eMachines Desktop PC

1 Answer

Power on emachine T6420 and moniter is blank. The moniter soon loses contact with the computer. The fan run and power is OK there is no beep code.


If you mean after the computer performs the self test the screen goes blank and stays blank, eventually turning off you are having a hard drive problem. When the computer boots you should see an E-Machines logo and/or a self test on the screen. That is done by the motherboard as part of every boot up. After that the motherboard passes control to your boot device and loads your operating system. If your computer stops booting at that point, your boot device is not working properly. That could be caused by many things - virus, hardware failure, power outage. If you really mean you see nothing at all on the screen when you press the power button your computer simply is not working at all. Open the case, blow all the dust out of it and reseat all components you can, then try again.

Jun 05, 2009 | E-Machines eMachines Desktop PC

2 Answers

My Emachine wont stay turned on


My first guess is that you have a virus.  If your virus check software cannot find the problem, other possibilities are a bad power supply or power switch.

Feb 27, 2009 | E-Machines eMachines Desktop PC

2 Answers

Windows will not open up


try to get into safe mode (press the f8 key at the bios screen, before it starts to enter windows) inside safe mode, go to control panel/system/device manager, and look for and repair any hardware defices denoted with an exclimation point ,caution sign or red x.

Dec 29, 2008 | eMachines T5274 Desktop PC

1 Answer

Screen on moniter is not full


I think that you need to reinstall or find a new driver for it.

 

Sep 02, 2006 | E-Machines eMachines Monitor E15T4

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18408 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...