Question about Creative Labs Creative Webcam

1 Answer

Cannot enable webcam

I see a figure 8 in black and white Am I blocked or kicked off webcam ?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Follow the instructions below and it will work.

Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program.

When the program asks you to connect the camera to the USB port, do so and it should work.

Then to use it on the Web, do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the
camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function
properly.


A. Skype Setup:

After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:

1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and
Speakers to the computer Audio Card.
2. Then click on the Video Settings.
3. The camera if Installed Properly will come up and show a video picture.
4. Then, on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now be able to
see and her to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger

(http://www.soft32.com/download_30.html )

set it up as follows:

1. Go to Messenger at the top left and click on it.
2. Next go down to Preferences and click on it.
3. Next Calling and Devices on the right and set the Microphone and Speakers to the
computer Audio Card.
4. Next go to the Test Audio section and (in blue writing) click on “Open the call
setup assistant” and follow the instructions on the left window.

C. Windows Live Messenger:

1. After you start Windows Live Messenger, expand the view by clicking on the square on
top left next to the red X.
2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.”
And then click on “Show the Menu Bar”.
3. Next go to the Menu Bar on right side, click on “ “Action.”
4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.

When done both the Audio and Video will function properly so you can chat and see family or
friends you are connected to.

D. AIM (AOL) Messenger

1. On the VIM sign-in window click on Edit.
2. Then click on Settings Enhanced IM.
3. Next click on Enhanced IM.
4. Then click on Audio Video.
5. The Audio and Video portion has drop downs so you can select the proper audio card and
video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera

Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window.
If you are currently participating in an AOL Live Video IM session, a message will display:
You must disconnect the current AOL Live Video IM conversation before running setup. Would you
like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers
and microphone are working properly. Follow the on-screen prompts.
Notes:
· The first time you use AOL Live Video IM, a message will display: Would you like to
first check your audio and video settings? Click the Yes button. The Audio and Video Tuning
Wizard will appear to help you verify that your camera, speakers and microphone are working
properly. Follow the on-screen prompts.
· images in AOL Live Video IM may appear reversed, or as a mirror image (text may
appear backwards) when you look at your own camera feed or at the picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends.

After you get your camera installed properly, DO NOT unplug it from the USB port as it will
cause the drivers to be corrupt and render the camera unusable till reinstalled it properly.
Hope this helps. Bud

Posted on Nov 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect a plug electric dryer to a 4 plug outlet


for short, just dont mind the color.. the black wire from the new plug goes to right in/on the appliance terminal block, the white from the new plug goes to both white in the middle of the same terminal block and the red wire from the new plug goes to left terminal block of the appliance therminal block and of coarse the green from the new plug goes to the appliance frame.. no need nor sense in trying to figure the wire color of the appliance as it does not mean anything really and it does not follow any rules nor standards..

Nov 08, 2014 | Dryers

Tip

Webcam only shows black & white in Windows 8


Note: I have Logitech webcams but since this is a Windows fix it will probably work with any brand that is having similar problems:
I recently upgraded my PC to Windows 8.1 and discovered that my two Logitech webcams would only display black & white (although snapshots were in color). I tried all of Logitech's advice but nothing worked. The Solution: Use Windows Explorer to navigate to the .exe file in the Logitech folder (in my case the path is (C) / Program Files (x86) / Logitech / LWS / Webcam Software / LWS.exe). Right-click the file and choose "Properties". Click on "Compatibility" and choose "Run this program in compatibility mode for Windows 8". Restart your webcam software and it should now have color. (PS: The system may sometimes default to the original settings, so you may need to repeat the above to get your color back.)

on Jul 17, 2014 | Computers & Internet

1 Answer

My webcam is enabled and the drivers are up to date but i can't find where to turn it on


Just out of curiosity, navigate to a site that uses webcams ( msn messenger etc), see if the webcam kicks in when you click on the use webcam icon

Dec 25, 2010 | HP Computers & Internet

2 Answers

How to disarm or reset an alarm system for a 1996 Jeep Cherokee?


Hope this helps:- Factory Disarm Purple/Yellow (-) Driver's Kick Panel Black Connector at ECM -slice into this wire, & wire it to ground, this disables the alarm.
Cavity/Fuse Diagram (1996 Grand Cherokee, passenger side kick plate to find, Owner's Manual pgs 205-206): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Row 1: 1-6 (left to right) Row 2: 7-12 Row 3: 13-18 Row 4: 19-22
1996 Jeep Grand Cherokee Fuse Panel (Passenger Side kick panel) Reply

CAVITY FUSE DESCRIPTION 1 -10 amp (RED) Radio 2 -15 amp (Lt Blue) Cigarette Lighter 3 -10 amp (RED) Rear Washer Switch, Body Controller 4 -10 amp (RED) Airbag 5 -10 amp (RED) Lamp Out Module, Overdrive Switch, OBD II 6 -15 amp (Lt Blue) Vehicle Information Center/Graphic Display Module Park & Side Lamps, Overhead Console Lighted Visor, Automatic Dimming Mirror 7 -20 amp (Yellow) Body Amp, Cluster, Body Controller 8 -20 amp (Yellow) Rear Wiper Motor, Flipper Glass Solenoid, Cargo Lamp, Trailer Tow 9 -15 amp (Lt Blue) Brake Switch 10- 10 amp (RED) Rear Window Defroster 11 -10 amp (RED) ABS Module 12 -10 amp (RED) Heater-Ventilation-A/C Control & Recirculation Motor 13 -15 amp (Lt Blue) Hazard Switch, Turn Signal Switch 14 -15 amp (Lt Blue) Spare 15 -15 amp (Lt Blue) Spare 16 -10 amp (RED) Right & Left Courtesy Lamp, Glove Box Lamp, Halo Lamp Cargo Lamp, Underhood Lamp, Dome/Read Lamp Right & Left Visor, Automatic Dimming Mirror 17 -15 amp (Lt Blue) Radio Illumination, Tail Lamp, Graphic Display Module, Park & Side Lamps, Headlamp Switch, Body Controller 18 -20 amp (Yellow) Spare 19 -15 amp (Lt Blue) Passing Light 20 -15 amp (Lt Blue) Radio, Heater-Ventilation-A/C, Vehicle Information Center 21 -15 amp (Lt Blue) Power Outlet 22 -10 amp (Blue) Airbag Module -------------------------------------------------------------------------------------
1996 Jeep Grand Cherokee Alarm, Remote Starter, Keyless Entry Wiring Information Constant 12V+ Pink/Black Ignition Switch Harness Starter Yellow Ignition Switch Harness Ignition Dark Blue/Gray Ignition Switch Harness Ignition 2 Red/Black Ignition Switch Harness (for AC) Accessory Black/Orange Ignition Switch Harness Tach Gray/White Coil Brake Switch White/Tan Brake Switch Trunk Pin n/a Works with Dome Light Parking Lights Blue/Red (+) Left of Steering Column or Light Switch Head Lamp Tan/Black Light Switch Factory Disarm Purple/Yellow (-) Driver's Kick Panel Black Connector at ECM -slice into this wire, & wire it to ground, this disables the alarm. Door Trigger Yellow (-) Driver's Kick Panel see notes Door Lock 5/Wire in Driver's Inside Driver's Door Orange/Purple Lock Pink/Black Unlock Door Unlock and Passenger's Doors Inside Passenger's Door Black/White L Pink/Black Unlock Horn Wire Gray/Orange (-) Steering Column Windows Up LF=Light Blue, RF=Brown/White, LR=Blue/White, RR=Gray/Black Doors Windows Down LF=White, RF=Purple/White, LR=Red/Black, RR=Green/White
• Cruise Control Information • Stereo Information • View all Jeep Vehicles

Dec 18, 2010 | 1996 Jeep Grand Cherokee

1 Answer

My cam is already install but no image comes out it all black?


First go to Control Panel, Hardware, Devices and look for your webcam. Go through the tabs to make sure it is Enabled. If you do not see the webcam in the list, right click on the white space and select Show disabled devices. If you still don't see your webcam then you will need to reload the software drivers, either from disc or the manufacturer's website. Once you think you have it working you may want to reboot your computer, and then try the free webcam test tool.

Jun 29, 2010 | A4tech PK-635 Webcam

1 Answer

Negative screen image


Look in System Preferences for Universal Access, there is a Display option which says Black on White(the normal setting) and White on Black (the setting that has been enabled).

There is a keyboard short cut to change the setting, it involves pressing four keys - Apple, Option, ^ and 8.

Nov 29, 2008 | Apple iBook G3 Mac Notebook

1 Answer

Hp web cam


Normally, If you are running Windows XP, the Built-In Internet Connection Firewall (ICF) maybe enable without your knowledge. This is the default setting of Windows to protect your PC from hacking. However, of course, this default setting may block you from running some applications you might need to use like Viewing WebCam in Yahoo! Messenger. Anyway, there is always a way to solve the problem.

Below are the steps to enable you to veiw WebCam by instructing you to ensure that the correct ports are opened.

1. Click Start, Settings, and select Control Panel.
2. Double click on the Network Connections icon.
3. Right click the connection that you use to connect to the Internet, and then click on Properties.
4. On the Advanced tab, uncheck the box Protect my computer… if you would like to disable the firewall. If you like to only open the webcam ports, check the box and continue with the remaining steps.
5. Click the Settings button.
6. Click the Add button.
7. Under Description… fill in Yahoo! Webcam. Under Name or IP… fill in 127.0.0.1. Under both External Port and Internal Port fill in 5100. Check the button TCP.
8. Click OK to close all opened dialog boxes.
Work done! I guess now You can view webcam in Yahoo! Messenger

That will resolve the issue.

However, if the issue persists, you can try below thing. By disabeling and enabling the webcam feature.



Disabling Webcam application:
Disabling Windows Image Acquisition (WIA) service will disable the webcam.

1. Click Start, and select Run.
2. In the Open box, type SERVICES.MSC
3. Press Enter on the keyboard. Services box will pop up.
4. In the Services window, scroll down to Windows Image Acquisition (WIA) service. 5. Right-click "Windows Image Acquisition (WIA)" and select Properties.
6. In the General tab, under Service status, click the "Stop" button.
7. Click Apply and OK.
8. Restart the notebook. This will disable the webcam on the notebook

Enabling the web cam application :

1. Click Start, and select Run.
2. In the Open box, type SERVICES.MSC
3. Press Enter on the keyboard. Services box will pop up.
4. In the Services window, scroll down to Windows Image Acquisition (WIA) service. 5. Right-click "Windows Image Acquisition (WIA)" and select Properties.
6. In the General tab, under Service status, click the "Start" button.
7. Click Apply and OK.
8. Restart the notebook. This will enable the webcam on the notebook.

That will resolve the issue.

Sep 07, 2008 | HP Pavilion dv6000z Notebook

1 Answer

Connection of the cable wire to the circuit block at the back of the stove


3 wires BLACK(110v), WHITE(nuetral), RED(110v). doesnt matter black or red,left or rigth so long as white is in middle..

Mar 07, 2008 | Kitchen Ranges

1 Answer

Can only get black and white


1. Download and run a utility from Microsoft called AmCap. 2. Run it and select your webcam from the Devices menu. Verify the webcam output is visible. 3. Go the the Options menu and select Video Capture Filter. 4. Make sure that the Color Enable checkbox is checked, and the Saturation slider is in the middle. Or just click on Restore defaults. Hope that helps.

Jul 25, 2007 | Logitech QuickCam Pro 4000 Webcam

Not finding what you are looking for?
Creative Labs Creative Webcam Logo

377 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creative Labs Computers & Internet Experts

micky dee

Level 3 Expert

2776 Answers

Shawn DuRee

Level 3 Expert

355 Answers

kevinmacleod

Level 1 Expert

3 Answers

Are you a Creative Labs Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...