Question about Washing Machines
E40 is an error from the door locking mech (interlock).this is the bit behind the port hole door frame at approx 3 o clock pos,where the door striker pin goes through hole.
Held on with 2 screws and you need to remove plastic clamp from door gasket to gain access.
Check the Door Switch/interlock or the WIRING for failure in this case and repair as necessary.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
Posted on Sep 17, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 24, 2012 | Zanussi IZ161S Front Load Washer
Apr 26, 2010 | Zanussi IZ161S Front Load Washer
Jan 10, 2010 | Zanussi IZ161S Front Load Washer
Dec 09, 2009 | Zanussi IZ161S Front Load Washer
131 people viewed this question
Usually answered in minutes!