Question about HP LaserJet 2500N Printer

1 Answer

Jet direct card setting

I have an HP LaserJEt 2500n. I can't seem to communicate w/it. The Jetdirect card has an IP of 192.0.0.192. How do I reset this? I tried the "cold boot" on the printer, wasn't any help.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 72 Answers

Use the HPJetDirect software to configure printer. I uploaded it here:

http://wikisend.com/download/458082/HPJetDirectDiscoveryTool inpw_enww.exe

Click the BIG GREEN DOWNLOAD button. If the software cannot find the printer, try connecting printer network cable directly to computer.

Posted on Jun 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove the jet connect card from a hp laserjet 4015 dn printer


It is held in with 2 screws. Remove the screws and carefully remove the jet direct card. Note: the jetdirect card is where your network cable plugs in.

Jul 15, 2014 | HP Laserjet P4015x Printer

1 Answer

I have both green light next to the rj45 on my jet direct 610n, but my jet direct doe not show when I print the configuration page, I tried cold reset didn't help. Any idea howni might be able to...


If your JetDirect Ethernet card does not show up on the configuration page then the JetDirest is bad. This is somewhat common with the 610N cards. You will need a new card. They are cheap to buy just about anywhere including Ebay. I have replaced dozens of them over the years.

Sep 12, 2010 | HP LaserJet 4100tn Printer

1 Answer

J4167A jetdirect card not ready LAN ERROR-OPEN


if it is recognizing the jet direct card then the card should be good, not sure if yor network is setup for using dhcp but I usually deal with manual settings on these cards. I'm sure you know what your doing but it doesnt hurt to bounce it off others anyway.

I'll assume you know how to access the eio settings for the jetdirect from the menu screen.

choose manual setup instead of dhcp and keep all the othr settings at default except these other 3

1. You'll need to assign a manual I.P. address

2. you'll need a subnet mask I.P

3. You'll need a default gateway...

If you have other printers online then the subnet mask and default gateway should match the other printers but the actuall printer I.P address will of course be different... Hopefully this will help you out, and if so please write this a FixYa!!

Jul 19, 2010 | HP LaserJet 4100n Printer

1 Answer

HP 4200 Laser Jet Printer Error Code 82.0180 EIO 2 Error


The error message "83.0180" shows that an EIO error has occured.
Perform the following workaround and see whether the issue still persist.
1. Ensure that the printer is connected directly to the wall outlet.
2. Turn off the printer and then power on and see whether the issue persist.
3. Reseat the Jetdirect card and see whether the issue still persist.
4. Reseat the jetdirect card on a different slot and see whether the issue still persist.
5. Remove all the accessories from the printer and then power on the printer. See whether the issue still persist. If the issue does not persist, add on the accessories onee by one.
6. Power on the printer and check whether the issue persist, each time an accessories are added.
7. Swap the Jet direct card with a known good jet direct card and see whether the issue still persist.
8. Perform a cold reset and see whether the issue still persist.
To do a Cold Reset:
1. Remove all cables.
2. Press & hold the Test button while applying power & continue to hold it for 10 seconds, then release it for 10 seconds, then unplug it again.
3. Connect all cables & power it back up.
4. Wait 2 minutes for discovery & DHCP. If desired, change the DHCP & address settings.

May 07, 2010 | HP LaserJet 4200 Printer

1 Answer

HP Laserjet 4050. Can I connect from my TCP/IP to JetDirect?


To use a printer DIRECTLY into your PC or laptop (without plugging both into a network hib, or switch), you need to use a CROSSOVER patch cable.

Feb 19, 2010 | HP LaserJet 4050 Printer

2 Answers

I am on a network with a brand new HP 8500. I have searched for the printer and my laptop doesn't pick it up. What amI missing?


Have you checked that the IP range for the printer is on the same IP range for your network? you could always cold reset the printer which will reset the network card back to zero's. You attach it to the network and your server should issue an IP address via DHCP. You should be able to see it on the network then.If not, the jetdirect network card may be at fault.Has the printer got a Jetdirect network card installed?

Oct 15, 2009 | HP LaserJet 8500 Color Printer

2 Answers

How do i set ip address for new jet direct card on hp 4600 dn


Go here for the manual cause it's a bit hard to walkthrough. When the printer is on and ready, you want to click the menu button and scroll though to the configuration menu -> i/o menu. You can print a configuration age to see what the current address of the jetdirect card is. If you're comfortable with command line, you cna use telnet to connect to the jetdirect card and configure it that way.

Oct 05, 2009 | Office Equipment & Supplies

2 Answers

HP 5500DN wont recognise jet direct card has been ok for 12 months?


Did you try another jet direct card??
It is a commen problem for the 615N card. Use a 620N and mostly the problem is gone.

Jul 10, 2009 | HP Color LaserJet 5500 Printer

2 Answers

Need to install network printer to DLink Router


It has been a few months, so you probably have resolved this -- but just in case someone else is looking to find out the IP address on the internal print server of an HP Laserjet 4000n printer so they can set it up on their network, here are the steps to find the IP address on the HP JetDirect internal print server:

1. Have the Ethernet cable plugged in to the router and the JetDirect 600n card and power it on.
2. Make sure display screen on printer says "Ready".
3. Press the Menu button on the printer until you see Information Menu.
4, Press the Item button on the right (+) side until you see Print Configuration page.
5. Press the Select button and a configuration page should print.

One page is the printer's configuration and the other page is the print server configuration page. If you have a good JetDirect card, and good connection to your router, the IP address of the printer, plus its subnet mask and default gateway should be shown on the EIO configuration page.

If the printer has been manually set with a static IP address, subnet mask and default gateway that will not work on your network, you will see the settings will indicate "Configured by" User Specified.

To clear those settings and allow DHCP setting, perform a cold reset on the JetDirect card, by powering off the printer, holding down the green "Go" button and powering it back on until you see "COLD RESET," let go of the green Go button, wait a couple of minutes, then run another configuration page to see the freshly assigned DHCP address of the print server.

Hope this helps someone.

Mar 14, 2009 | HP JetDirect 600N Print Server

2 Answers

Hp laserjet 4200 printer- how to find the current ip address?


To have an IP address for the printer you must either have a HP4200n or install a Jetdirect card into the printer. The Jetdirect or "N" version of the printer with the built in Jetdirect holds the network IP address. Subnet Mask, Gateway Derfault and handles the networking functions. If you have a 4200n or Jetdirect installed it will print out on the configuration page.

The standard HP 4200 doesn't have the networking capability without adding the card. In the event that you have a card installed and its not recognizing the card on the configutation page it may be bad. The HP 615n cards are known to have burn out issues. If you have to install a card to upgrade your printer, I recommend a HP 620n or better to get around the known bad issues with the 615n cards.

Jul 07, 2008 | HP LaserJet 4200 Printer

Not finding what you are looking for?
HP LaserJet 2500N Printer Logo

532 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...