Question about Logitech Webcam

1 Answer

What happend my webcam its showing black screen. i have plug & play webcam but i cannot see the screen its showing black screen

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Follow the instructions below and it will work.

Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program.

When the program asks you to connect the camera to the USB port, do so and it should work.

Then to use it on the Web, do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.


A. Skype Setup:

After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:

1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
2. Then click on the Video Settings.
3. The camera if Installed Properly will come up and show a video picture.
4. Then, on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:

1. Go to Messenger at the top left and click on it.
2. Next go down to Preferences and click on it.
3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

C. Windows Live Messenger:

1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
3. Next go to the Menu Bar on right side, click on “ “Action.”
4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger

1. On the VIM sign-in window click on Edit.
2. Then click on Settings Enhanced IM.
3. Next click on Enhanced IM.
4. Then click on Audio Video.
5. The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera

Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly. Follow the on-screen prompts.
Notes:
· The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly. Follow the on-screen prompts.
· images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends.

After you get your camera installed properly, DO NOT unplug it from the USB port as it will cause
the drivers to be corrupt and render the camera unusable till reinstalled it properly.
Hope this helps. Bud

Posted on Aug 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My screen is black and won't show anything. Still plays cd's and all but just no picture. happend when previous owner hit a pothole.


A cable or connector has probably come loose. (It may be an internal connector). Check all connectors carefully.

I hope I have been of help but please do not hesitate to ask if you have any further questions.

Feb 21, 2011 | Car Audio & Video

1 Answer

Black screen - audio works - hp logo on start - then goes black


It is either the power supply or the backlight inverter board finally failed. You will need to do some voltages checking inside, also see if you can see any bad caps in the power supply.
See my troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

Parts: www.shopjimmy.com

Jun 15, 2010 | HP LC2640N 26 in. HDTV-Ready LCD...

1 Answer

My webcam starts to work then the screen goes black how do i fix it?


Hope you had the webcam unplugged from your computer whilst you installed its drivers.?
Delete the cam & let system re-install it. Start- My computer- right click-properties-hardware-device manager. Find your webcam, right click & uninstall it.Turn your machine off & on(webcam unplugged) When system powered up, plug your cam in & follow wizard instructions.

Oct 01, 2009 | Linare Desktop, AMD Sempron 2200,40 GB HDD...

1 Answer

Plug and play webcam wont work on yahoo...


Once your webcam is working on your computer,you can configure it to Yahoo Messenger.
Its good practice to disconnect and re-connect your webcam before you start - if you have been using it elsewhere the Yahoo software may have difficulty in locating it. Mine, I just unplug it from the USB and plug it back in, if yours is integral with the computer you will have to re-start the computer, unless the software has a feature for this.
Of all the chat programs, Yahoo is the most painful software to set up but if you follow these instructions you should be ok.

INTERNET CONNECTION
Webcam connected
Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

TESTING
> Messenger > My webcam - the warning panel will launch, click 'OK' and your webcam will start. You should be rewarded at this stage with your happy smiling face.

DEFAULT
With webcam still running > Messenger > Preferences > Webcam > Camera Source - set your webcam as default using dropbox. > Camera Settings - adjust settings to suit. > Apply > OK
Take a note of any additional software, if you have multiple choice for Camera Source, you may wish to uninstall any redundant webcam software later to prevent conflicts

PERMISSION OPTIONS
> Messenger > Preferences > Webcam - make your selections ( who you will allow to view you) > Apply > OK

IN USE
When you are both on line and wish to show your webcam > Actions > 'Invite to view my webcam'. This will launch an invitation on your contacts screen when they 'Accept' your webcam broadcast will start- There can be considerable time lag ( 1 minute) before they see you, so dont be too impatient ( You can check the status on the bottom left of your webcam panel. You can 'drag and drop' the frame to a convenient location by grabbing the top border.
There is a shortcut ( webcam icon ) down by your pic as well
Your contacts needs to configure their connection the same as above or they may get a "webcam not connected" message

If you complete the above and still have problems - check to see if your cam is compatible with Yahoo

YAHOO SPECIFICATION
To find out what the requirements are for messenger webcams, check out the following.
http://help.yahoo.com/l/uk/yahoo/messenger/messenger9/webcam/mstacamreq.html;_ylt=AghoQIvxhmhcugo.AOaNKaokPCV4

Sep 03, 2009 | Yahoo Messenger

1 Answer

My camera just shows a black screen


Software or hardware problem ?
Test your hardware here by clicking on "allow" in the top window and seeing if your webcam works in the left panel
http://www.testmycam.com/
If it works there you know you have a software problem
Solutions
1) go to your Device Manager - expand the "Imaging", file update your driver by right clicking the webcam text and select update - take the internet option when prompted
or
2) You can uninstall the webcam program and run the CD or go to the manufacturer's support website and download from there.
or
3) If your OS recognises new hardware - uninstall the webcam software - plug the webcam in and let it find and install the software.

Aug 19, 2009 | Microsoft LifeCam VX-1000 Webcam

1 Answer

Genius Web Cam- Why only Black Screen?


simply go to geniusnet.com.tw and download all the original genius webcam softwares and install

Mar 08, 2009 | Genius VD3000022 Webcam

1 Answer

My amcap webcam has a black screen but was working before how can i repair this


Normal 0 Preview capture may appear black

In some cases, the preview capture may not appear.

To fix this:
- Unplug the webcam while itss showing the black screen, wait a couple seconds and plug it back in.
- Or -
Lower the video resolution.
Hope this helps. Bud

Dec 01, 2008 | Trust SpaceCam 100 Webcam

1 Answer

When broadcasted, people cant see me on my webcam but i can see myself


I using msn it sometimes stuffs up.
try unplugging camera rebooting then plug camera in you should have found new hardware popup bottom of screen if it does not need to reinstall drivers

Jul 18, 2008 | Microsoft LifeCam VX-3000 Web Camera

Not finding what you are looking for?
Logitech Webcam Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2780 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...