Question about Belkin (F5D9230-4) Wireless Router (F5D92304)
My router is working ok but when I connect to my laptop via a wireless connection it is showing that it is connected but unsecure. Please could you help me secure it.
open your browser and type 192.168.2.1 and go to setup page and go to wireless settings and change ssid ( network name ) and password . than click on apply settings and for more technical help contact Linksys Tech support . i hope this may help you ..thanks
Posted on Nov 20, 2014
Open the router page 192.168.1.1 >> type this in the internet explorer address bar.
1. the Home Page is displayed. Click Wireless from the left menu
2.The settings to Wireless section of Router appear.Click Channel and SSID.
3.Changing the Wireless Network Name (SSID)
To identify your wireless network, a name called the SSID is used. The SSID is your network name. The default network name of the Router is Belkin N1 Wireless followed by six digits that are unique to your Router. Your network name will look something like Belkin_N1_Wireless_123456.
You can change this to anything you choose, or you can leave it unchanged. Keep in mind, if you decide to change your wireless network name, and there are other wireless networks operating in your area, your network name needs to be different from other wireless networks that may be operating in your area. To change the SSID, type in the SSID that you want to use in the SSID field and click Apply Changes.
The change is immediate. If you make a change to the SSID, your wireless-equipped computers may also need to be reconfigured to connect to your new network name. Refer to the documentation of your wireless network adapter for information on making this change.
4.Changing the Wireless Channel
There are a number of operating channels from which you can choose—in the United States, there are 11 and in the United Kingdom (and most of Europe), there are 13.
In a small number of other countries, there are other channel requirements. Your Router is configured to operate on the proper channels for the country in which you reside. The channel can be changed if needed. If there are other wireless networks operating in your area, your network should be set to operate on a channel that is different than the other wireless networks.
Select channel from Wireless Channel drop-down menu. Click Apply Changes.
5.Using the Wireless Mode Switch
This switch allows you to set the Router’s wireless modes. There are several modes. Note: Some modes may require firmware updates to be enabled.
1) 802.11g only
Setting the Router to this mode will allow only 802.11g-compliant devices to join the network, keeping out any slower 802.11b devices.
2) 802.11g & 802.11b
Setting the Router to this mode will let 802.11g- and 802.11b-compliant devices to join the network.
3) 802.11n & 802.11g
Setting the Router to this mode will allow N1/draft 802.11n- and 802.11g-compliant devices to join the network, keeping out any slower 802.11b devices.
4) 802.11n only
Setting the Router to this mode will allow only N1/draft 802.11n-compliant devices to join the network, keeping out 802.11g and 802.11b devices.
This mode will turn OFF the Router’s access point, so no wireless devices can join the network. Turning off the wireless function of your Router is a great way to secure your network when you are away from home for a long period of time, or don’t want to use the wireless feature of the Router at a certain time.
Select wireless mode from Wireless Mode drop-down menu. Click Apply Changes.
6. Using the Broadcast SSID Feature
Note: This advanced feature should be employed by advanced users only. For security, you can choose not to broadcast your network’s SSID. Doing so will keep your network name hidden from computers that are scanning for the presence of wireless networks. To turn off the broadcast of the SSID, remove the check mark from the box next to Broadcast SSID, and then click Apply Changes.
The change is immediate. Each computer now needs to be set to connect to your specific SSID; an SSID of ANY will no longer be accepted. Refer to the documentation of your wireless network adapter for information on making this change
Posted on Nov 01, 2007
Reply to zaggoraut try and use http://192.168.2.1/ insted because it really depends on the type of router
Posted on Nov 22, 2008
Open the the console page of the wireless router by typing this ip address on the address bar in the internet explorer.
it will open the console page of the router.on the left hand side
u will see an option which says wireless settings.click on
wireless settings.then u need to look for the option which says
wpa security passphrase,just put the passphrase there n
click on apply,ur wireless connx will be secured.
Posted on Apr 28, 2008
Hi there welcome on fixya.com!
To secure your network, you will need to go to the following adress 192.168.0.1 or 192.168.1.1.
Then enter :
Go to the wireless section select WPA or WEP and choose your password.
Posted on Apr 04, 2009
How can Isecure my router
Posted on Oct 21, 2008
Lol looks like someone didn't read the question
Posted on Mar 17, 2008
The 192.168.2.1 page is not showing up and i'm trying to secure my router and every time i try to get to that page to secure it keeps telling me that there's a problem on that page even though it was working earlier today and its really starting to confuse me
Posted on Nov 09, 2008
Tips for a great answer:
Jan 10, 2010 | Belkin Wireless G Plus MIMO (F5D9230-4)...
Aug 21, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...
Dec 03, 2008 | Belkin Wireless G Plus MIMO (F5D9230-4)...
May 25, 2008 | Belkin Wireless G Plus MIMO (F5D9230-4)...
Dec 16, 2007 | Belkin Wireless G Plus MIMO (F5D9230-4)...
Dec 06, 2007 | Belkin Wireless G Plus MIMO (F5D9230-4)...
Oct 31, 2007 | Belkin Wireless G Plus MIMO (F5D9230-4)...
16,241 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: