Question about HP LaserJet 2200dn Printer

2 Answers

My laserjet 2200dn is not printing on the left side of the page.

I have changed the ink with a new toner but still not printing. Can someone please advise on what the issue might be and how it can be resolved?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • HP Expert
  • 217 Answers

Hello,
as you said - you have new toner cartridge, but the problem still persist..
You have to clear mirrors inside of laser-scanner assy (LSA).
To do that you have to remove all printer covers, LSA
Then open LSA top cover and clear gently all mirrors inside by using dry cloth or cotton ear buds.

Warning! If you don't know how to do this steps just visit HP service!

Good luck!

Posted on Mar 19, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 828 Answers

Check your new toner if there some sticker inside that bother to fill out the powder... try to check again..

Posted on Jun 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp laserjet p3015 not printing


The printer will have a message in the screen saying roughly how many pages are left in the toner cartridge if the toner is running low. Try printing a "configuration page" by pressing "ok", arrow down to "information", arrow down to " print configuration page", then press "ok". If this page prints you still have toner left.

Dec 12, 2012 | HP Laserjet P3015X Printer

1 Answer

I have a preoblem with the HP laserjet printer 2200dn it printing blank and the paper comes out slowly from the fuser unit what could be the problem


The 2200 is a slow printer. I would guess there's no problem with the speed. You should try replacing the toner first. I've had this problem on off brand toner's (even brand new).

Oct 16, 2012 | HP Laserjet 2200dn 2200 Dn Printer Duplex...

1 Answer

Hi! I just changed my print cartridge (HP LaserJet- C7115X, ink 15x) and the printing quality is still low! It's as if it's still running out of ink, however the cartridge is brand new. Please help!


Did you remove the strip that the printers ship with? If the pull tab is still in then there is typically enough toner to print a few pages and then it fades out. Remove cartridge and check on left and right hand sides for a plastic loop usually orange. The instructions would have been in the box.

Mar 23, 2011 | HP LaserJet 1320 Printer

1 Answer

HP laserjet 5000gn when i print, output smears ink on 2 sides. not a toner issue cause changed toners already. someone says printer is telling me something and might be a warning of


If by smearing you mean the print is also rubbing off? Then you definately have a fuser unit issue. The fusing unit is the assembly that heats up and "fuses" the toner onto the page. When these start to go bad, usually on one edge or the other the print will smear/double image/wipe off of the effected area. One test you can do to verify a fuser problem is to print a page and then when the page is about half way thru the prcess, shut the printer off. Open the top and remove the toner cartridge, pull out the page and see if the lower part is not smeared. Basically what your checking is to see if the print is ok BEFORE it goes thru the fuser. Based on your description I would suspect your fuser is going bad.
Good Luck and Thank You for using Fixya.

Sep 09, 2010 | HP LaserJet 5000gn Printer

1 Answer

Color LaserJet Printer Problem


Have you tried changing the magenta and black toner cartriages?

Jan 26, 2009 | HP Color LaserJet 3500 Printer

1 Answer

Printing vertical grayish black ink on the left and right side of page


replace the toner cartridge, you wont have anything "dripping" out of it as the toner inside is a powder. if it still appears replace the fuser.

Oct 22, 2008 | HP LaserJet 4250dtn Printer

1 Answer

HP 3900 laser printer


change the yellow toner
change the black toner
before change toners tray to clean printer inside carefully

Sep 11, 2007 | HP LaserJet 3600n Printer

Not finding what you are looking for?
HP LaserJet 2200dn Printer Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...