Wiring diagram need wiring diagram for 60083 tile saw

I believe the saw is made by Chicago Pneumatic. Here is a contact link. https://www.cp.com/en-us/tools/contact-us

While I can locate an assembly diagram for a Chicago 10 inch tile saw. I am not sure that applies to your model, probably not:

https://www.manualsdir.com/manuals/72268/chicago-electric-10-industrial-tile_brick-saw-69275.html?page=19

https://go.harborfreight.com/sku/69275/

Other than looking into a replacement parts outfiti, I suspect your best bet is to contact the company and see what they might make available. I just don't see a wring diagram on the web for this.

not sure if you will find it at this link but have a look... Wire diagram for tile saw 10 in Chicago TC250B Google Search

eddie,
Thank you for asking me to help you with your problem. However, this is either not within my level of expertise or the question is unclear or there is not enough information and I cannot help you at ths time.

get the new switch 1st,i have gotten them at orchard supply hardware,for mk 101 before,if your switch is broken in the on possition,you can leave it be for now and use a electrical surge outlet you probably have your tv pluged into,they have a on/off reset switch on them and you can use that to get you by for now or a foot pedal sold at tile stores for tile saws,good luck

Look at eReplacementParts.com and the parts diagrams or ToolPartsDirect.com - Your Tool Repair Supply Store.

If you need more help come back.Post / thumbs / testimonial are welcome!

You usually don't install gfi's at the load (saw) but instead at a socket where the plug is inserted. If you use an extension cord, change the socket end to a metal 'handy' outlet box and install a local type gfi there. Wire the black wire to the brass screw, the white wire to the silver screw, and green wire to the green screw. Make sure that none of the wire strands are left loose to short out on something. They are available in any hardware store or home center. Hope this helps!

Here is the website you need to find the manual and wiring diagram for your saw

Hope you find what you are looking for

http://www.mkdiamond.com/tile/saw_660.html

here is the exploded parts view and parts list.
http://www.mkdiamond.com/pdf/manuals/tile/100/mk100_iso.pdf
You don't really need a wiring diagram. get the switch, swap it out wire for wire... pretty easy.. getting it apart will be the hardest part.

On most of the tile project you will need: tile nippers, 1/4", 1/8" and 3/16" spacers, grout sponge, mixing tub, mixer and various trowels.