Question about Maytag SDE3606A Electric Dryer

1 Answer

How do I get to the belt on my Mdaytag SDE 3606 AYW

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Its not a hard job...just time consuming because you have to remove the front panel and the front screws for the top panel, to allow it to lift up. (or on the newer Maytags, made by Whirlpool...the top may come off first, then the front). That allows access to the dryer drum and the belt runs around it. The belt also runs around the idler wheel assembly, so be sure to make a diagram (or if you have a digital camera, take a photo) before removing the old belt, so you know how to re-install the new one.

As always, before working on any electrical appliance, be sure and unplug if first. It also helps to move the dryer out into the kitchen and against a counter top, so the top lid has something to rest against when you raise the front of it up.

Here's a good website with photos that will help you better than I could explain it:
http://repair2000.com/wpoolbelt.htm
Maytag is manufactured by Whirlpool and even if your model doesn't look exactly like the dryer in the photos, it will be close enough to help you.

Hope that helps

Posted on Jun 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to find the manuafacturer of the sde brand television


You get remote codes , if any, from the provider of your cable services.

Aug 30, 2016 | Samsung Sme-2220, Sde-3000

1 Answer

I bought a Samsung DVR 4 CHANNEL SDE-120/SDE-3000/SDE-3001 AND WAS TOLD THE PASSWORD IS 4321 HOWEVER IT'S NOT IS THERE ANY WAY TO RESTORE THIS DVR TO FACTORY SETTINGS YOUR MY LAST HOPE TO FIX THIS PROBLEM...


Hi Katrina, The default username is admin (case sensitive) and your default password is 4321.
How ever if not Try 0000 or 1111 or 3333 .

good luck
Marc

Feb 02, 2015 | Samsung Home Security

1 Answer

Maytag clothes dryer Model PYE 2300 AYW will not start. All elements tested okay. pye2300 AYW won't start.


Check the door switch. It might be a small button under the edge of the door. It's possible it is stuck.

Sep 26, 2013 | Maytag Clothes Dryer Almond Timer Knob...

1 Answer

No picture,circle with slash


This means that there is no camera signal getting to the DVR. Could be a bad camera, or camera power supplies, or connection to DVR or camera.

Feb 13, 2013 | Samsung SDE-120n 4 Channel DVR System

1 Answer

How do i get passed the boot menu on my Archos 101?


If you are not getting the boot menu when holding the - when powering on and only getting the recovery, that verifies that it did not install. Have you tried downloading the SDE firmware again and then try isntalling? maybe it did not download correctly. Did you download the correct SDE for the Gen 8, not the one for Gen 7 or 6? You followed the directions to install the SDE on a Gen8 on
http://www.archos.com/support/support_tech/updates.html?country=us&lang=en?

Feb 04, 2012 | Computers & Internet

1 Answer

ถถถ


CD Key - Microsoft Office Standard 2007
KGFVY-7733B-8WCK9-KTG64-BC7D8

Apr 14, 2010 | Microsoft Office Computers & Internet

1 Answer

Model PYE2300 AYW the dryer turns on and provides heat but the drum does not spin


your belt has come off the drum or has broken. Take the model and serial number to parts house for replacement. The belt should be accessed through the back of the dryer. Good Luck on your repair. Make sure to disconnect electricty before removal of back.

Dave

Aug 05, 2009 | Maytag PYE2300AY Electric Dryer

1 Answer

My Maytag model SDE 3606 AYW elec is making a lot of noise when it spins like its out of balance, it sounds like when you have a pair of tennis shoes in it


Hello.

Usually when a Maytag dryer makes a noise like that, the blower wheel is bad and will need to be replaced. This is a common problem and and a fairly easy repair. Take you model number to your local repair shop and they can get you the part and instructions on how to replace it.

Jul 23, 2009 | Dryers

Not finding what you are looking for?
Maytag SDE3606A Electric Dryer Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Maytag Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...