No Rip print software for my Epson 1290

If you have the operating systems disk, you can boot from the disc, and once the setup come dump, choose password reset from the "utilities" drop down menu. Change your password, shutdown, and reboot.

Hi Bobby
You will need to get an OS X installation DVD. Try eBay.Don't go for anything lower than 10.4 (Tiger)10.5 (Leopard) and 10.6 (Snow Leopard) should run fine on this machine.Don't bother with 10.7 or 10.8

font.f1 {font: 12.0px Helvetica} Thanks for asking your question with Fixya Support. I will be glad to assist you.

If you are experiencing issues with downloading songs from iPhone 3G to your Powerbook G4, there are a few steps you need to check:
• Make sure your Mac OS X operating system version is up to date. The most current updates for the current 3 most common Mac OS systems out today: Mac OS X 10.4 Tiger: Mac OS X 10.4.11 (Current version) Mac OS X 10.5 Leopard: Mac OS X 10.5.8 (Current version) Mac OS X 10.6 Snow Leopard: Mac OS X 10.6.6 (Current version)
If your present version of Mac OS X does not match the current version update listed above for your system, then click on the Apple menu icon in the upper left corner of your screen and select "About this Mac" to verify. • Then close that window and click on the Apple menu icon once again and select Software Updates andrun the updates.
• Once your Mac OS X has been updated to the most current version, then you will need to visit the link below, then download and install the current version iTunes Link: Download iTunes 10 for Mac (for 10.5 Leopard or higher) Link: Download iTunes 9.2.1 for Mac (for Mac OS X 10.4 Tiger or earlier)
• When you have the current version of iTunes on your Powerbook, then commence to connect your iPhone 3G with your Powerbook and sync your iPhone with iTunes.
I am providing these initial steps to you, due to the limited information I have from you regarding your technical issue, but will be glad to assist you further, if you are unable to resolve your issue with these provided steps.
I hope this helps.
Regards,
-Mactectrainer

go into system preferences and goto startup disk and click on Mac OS X 10.X.X

Try to manually update your Java Environment. go to www.java.com and follow the instructions on the web page.

Not so hard, the best bet for instructions and pics:
http://www.david-reitter.com/software/powerbook-repair/index.html
Good luck!! EJ

Hi,
You can download the required software from the below link:
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=60202&prodoid=58654761&BV_UseBVCookie=yes&infoType=Downloads&platform=Macintosh&x=21&y=9
I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Regards
Anand

check the Brother websight for update software for a mac. have you tried printing under the epson printer.

Hi-

chances are you are having a Corrupt OS, you can actually try to trash and reinstall the softwares that is corrupted or update OS to either 10.4 or 10.5... Hope this helps.

Have a look HERE