Question about Kenmore Elite 45986 Front Load Washer

1 Answer

MY kenmore elite has no power only beeps I see 2 wires to one board broken tryed to reinstall still no power. Can anyone help with this piece of shi_ has had 7 service calls

Posted by on

  • erica graber May 11, 2010

    so what all has been replaced? you say it only beeps is the door lock ok? Do the light on the panel light up do they all beep when you press them? any error codes?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

1 Beep/E10--Error: Water doesn't enter Cause: Water supply problem, Check kinks and faucets
1 Beep/E10--Error: Water leaks Cause: Water connections loose,household drain clog,oversudsing. Correct problems.
1 Beep/E10--Error: Dispenser drawer is open Cause: Washer will not operate if drawer is open.
2 Beeps/E20--Error: Water dosen't drain. Cause: Drain is kinked or household clog. Correct.
3 Beeps/E30--Error: Drum overfilled. Cause: Inlet valve,pressure switch or control board failure.Select drain/spin to remove water. Restart.
4 Beeps/E40--Error: Door is open. Cause: Washer will not operate if door is open. Close door.
5 Beeps/E50--Error: Motor is overheated. Cause: Wait 30 minutes to cool down. Restart.
7 Beeps/E70--Error: Cold water doesn't enter. Cause: Hoses crossed,faucet problem.
15 Beeps/EF0--Error: Oversudsing. Cause: Too much detergent,or improper detergent for machine.
15 Beeps/EF0--Error: Hot water doesn't enter. Cause: Hoses crossed,faucet problem.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Kenmore Elite dryer keeps beeping..just going through the end of cycle alarm-high,low,off...anyone have any suggestions. Now no panel lights, drum light on with door open, off when closed.


it sounds like you have a bad computer board.every time i saw a dryer that beeps on it's own it was a bad board and now you say you have no lights.most likely it's the board.there should be a tech sheet that will tell you how to get the machine into diagnostics,also you can try to unplug it for like 15 minutes and plug it back in,sometimes it will reset the board just like a house computer but if you have no lights it might not reset.remove the bottom panel the tech sheet should be taped to the back of it or in that area.

Oct 16, 2013 | Kenmore Elite HE4 Electric Dryer

1 Answer

I own a kenmore elite front loader and it has quit working. When I set it 2 wash it only beeps and flashes dl and f. I had a technician look at it over 6 months ago and he said I needed to replace the...


Possible causes:

Door lock mechanism is broken or removed from door.
Door switch/lock unit failure.
1. Check door switch/lock unit.
2. Check the wire harness connections of the door switch/lock unit to the Central Control Unit (CCU).

Try these sites for spares:
RepairClinic.com
espares.co.uk
AppliancePartsPros.com
mcminone.com

May 24, 2010 | Kenmore 44102 Front Load Washer

1 Answer

My Kenmore Elite quiet pack 4 will not lock to start a load. When I hold the start button it f then dl in the display screen help


Possible causes: (power off the mains first before checking)
Door lock mechanism is broken or removed from door.
Door switch/lock unit failure.
1. Check door switch/lock unit.
2. Check the wire harness connections of the door switch/lock unit to the Central Control Unit (CCU). The wires shd be secured well.

Try these sites for spares:
RepairClinic.com
espares.co.uk
AppliancePartsPros.com
mcminone.com

May 14, 2010 | Kenmore Elite HE4 Electric Dryer

1 Answer

My Kenmore Elite quiet pack 4 will not lock to start a load. When I hold the start button it f then dl in the display screen HELP


Possible causes: (power off the mains first before checking)
Door lock mechanism is broken or removed from door.
Door switch/lock unit failure.
1. Check door switch/lock unit.
2. Check the wire harness connections of the door switch/lock unit to the Central Control Unit (CCU). The wires shd be secured well.

Try these sites for spares:
RepairClinic.com
espares.co.uk
AppliancePartsPros.com
mcminone.com

Mar 23, 2010 | Kenmore Elite HE4 Electric Dryer

1 Answer

Lights do not come on kenmore elite dishwasher


There is a thermal fuse on this model located on the control board. Remove control panel and you will see it attached to the board with 2 wires going to it. part number is 8193762. Hope this helps.

Feb 24, 2010 | Dishwashers

1 Answer

Kenmore ELite 21086 Washing Machine


On many dishwashers there are secondary fuses located near the power hook up. Check you owners manual and see if you model is equiped this would be like the reset button on a garbage disposal. If this is not the case look for a loose ground wire often time these piece of equipment will not operate unless there is a ground connection. Lastly, these sudden abrupt failures are often a sign that something is wrong on a larger scale, look into leaks that may cause a short or abuse that has caused the issue.

Dec 01, 2009 | Kenmore Elite 21086

2 Answers

My ECS 915 G-A elite group motherboard doesnot display anymore on the monitor..


have you tried to isolate what the cause of the problem? first check the video card if is properly inserted into the slot, and check the memory, and cable from CPU to monitor if it is connected properly. then boot your system. And try to observe this beep error code this might help you locate where the problem is.

short beep System is OK
2 short beeps POST Error - error code shown on screen No beep Power supply or system board problem Continuous beep Power supply, system board, or keyboard problem Repeating short beeps Power supply or system board problem
1 long, 1 short beep System board problem
1 long, 2 short beeps Display adapter problem (MDA, CGA)
1 long, 3 short beeps Display adapter problem (EGA)
3 long beeps 3270 keyboard card

thnk you.

Nov 29, 2008 | Computers & Internet

3 Answers

Pm266a pro one long beep


open pc take out graphs card clean contacts and reinstal again, remove memory and clean contacs and reinstal, at this point it will be working

May 09, 2007 | Albatron PM266A Pro (PM266APROBULK)...

Not finding what you are looking for?
Kenmore Elite 45986 Front Load Washer Logo

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2333 Answers

fordexpert

Level 3 Expert

5546 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...