Question about Hayward 1.5 Hp Northstar High Performance Pump

1 Answer

I have Hayward earth filter for the pool along with a Pentair Mini Max 100 pool heater - first time starting both for the season and the filter motor is making a straining noise. For the few minutes its runnning the pressure is constant at 7.5 but the noise concerns me so I turned it off. Any comments or solutions?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 93 Answers

Make sure all vents are clean check to see if there is anything stuck in impeller with pump off take straner basket out look at opening going back to filter is water filling the strainer basket

Posted on Jun 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiring to gas valve on Pentair mini max 100


should be schematic in unit if not contact Pentair they will send you a PDF file

Jul 24, 2015 | Pentair Pool & Spa

2 Answers

Pentair Mini max my power light comes on but my pressure sw does not light up


if pressure switch does not light that means no pressure either water flow or a bad pressure switch you can jump the wires on the pressure switch but be very carefull if it does start make sure it does not bang or make noises

May 14, 2014 | Pentair Minimax NT Heater

1 Answer

My pentair mini max display is indicating a "LO" .


The pentair mini-max only displays LO when the water temperature is at or below 58 degrees F.
The heater is set to not fire at this temperature due to the condensation that can occur.
If the water is above this temperature and you are still getting this code, the temp sensor is installed incorrectly or is just bad.
If you need futher advise, e-mail me here.
adamh@newconceptchem.com

Nov 15, 2010 | Pentair Pool & Spa

1 Answer

Mini max 100 pool heater. Propane tank full pilot won't light


hello. i can help. if you have propane but you can not get the pilot to light your thermocouple needs to be replaced. this is a common item available at any hardware store.

Jun 25, 2009 | Pentair MINIMAX NT TSI IGNITER

1 Answer

D.e. earth pool filter returning dirt to pool


The flow tubes inside the filter canister are torn and letting dirt pass. The repair is simple and can be done by someone with a few hand tools. Download the manual for the filter here:www.haywardnet.com/products/Manuals/pdfs/manual9.pdf

You'll only need to replace the ones that are ripped, and the cost runs about $3 - $5 each. Search around on Google for a supplier or try a local pool dealer.

Jun 08, 2009 | Hayward EC-40 DE Pool Filter with pump

1 Answer

I have a Mini Max 100 pool heater. The pilot


check pressure switch for proper adjustment and make sure filter is clean so system pressure is normal

Jun 07, 2009 | Pentair MiniMax 100 Aboveground 100,000...

1 Answer

My pool heater will not start. The power light is off and the pressure sw is lit.


You must turn on the pump and let water circulate through the pool and the heater before you turn on the heater otherwise you will ruin the heater

Apr 16, 2009 | Pentair Minimax NT Heater

Not finding what you are looking for?
Hayward 1.5 Hp Northstar High Performance Pump Logo

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hayward Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1383 Answers

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers

Are you a Hayward Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...