Will not start but is allowing to set program

Yes, just make the unneeded setting match the one before it so nothing changes at that time.

have you held the start button for ten seconds to cancel the program

Just block it from the Firewall settings: go to Control Panel > Windows Firewall > Exceptions and untick the mark next to it.
But the best solution is to uninstall it , from Control Panel > Programs.

1. there are 2 firewalls one is on the laptop in the Operating System and one in the router this is you second barrier against hackers.
2. log into the router and allow the program> use the user manual and follow the instruction set to allow programs.

Trying installing the game in compatibility mode by right clicking on the EXE file on the medium used to start the install for the game and click properties. A window should pop up with a tab called Compatibility. Under compatibility mode click the check box to "Run this program in compatibility mode for:" In the drop down menu click Windows 95. Then try to run the install again.

Start>default programs. Click bottom one has the settings you need. "Set program access and computer defaults" Use custom and click arrow at right. Then a menu will drop down. select the email program you want and you have an option of allowing the others by checking boxes. Do this for all of your preferences and click save or ok.

I'm guessing it's a built-in camera. In this case, if you open a program such as Skype or MSN messeger, you will have a pop-up window saying that the program has identified your web camera, and would you like to set it up.
otherwise, these built in cameras have program which allows you to record images and mainly set your camera. Check in your "Start" menu for such a program

try turning off screen saver gl

Are you logged in as an administrative user on the machine? If so, when you open up NIS2009, you should see three groups of controls. The middle group for Internet should have the a link for Settings next to it. Click on that. Enable the option for Automatic Program Control (might be on an Advanced Settings tab). This will let the firewall configure itself when a new program is run instead of asking the user. It normally gets the settings right. In the Program Control tab, select the programs that it is blocking that you want to allow and change the Access setting from Block to Allow or Auto.