- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sep 16, 2016 - Uploaded by The_Ging
This video provides a step-by-step walkthrough to teach you how to replace the touch screen digitizer panel on ...
Dragon Touch M10X Screen Replacement: If the screen on your Dragon Touch M10X is damaged and needs replacing this guide will allow step by step instructions on how to replace the screen. ... Step 1 Screen. Remove the two screws from the top of the tablet as shown in the figure using a J0 philips head bit. Edit.
the screen needs calibration. below are the instruction on how to calibrate the screen.
The Digitizer Preferences screen opens the digitizer calibration screen. This is the same screen that appears when you start your handheld for the first time.
You can recalibrate your screen after a hard reset or if your digitizer drifts. You may need to repeat this process a few times until the calibration registers.
To calibrate your handheld screen:
1. From the General Preferences list, select Digitizer.
2. Tap the targets as indicated on the screen as precisely as possible.
You can also press Left, Right, Up, and Down on the navigator to highlight a Preferences screen name and then press Select on the navigator to open that Preferences screen.