Question about GE WPXH214A Front Load Washer

Open Question

No power comes on my Servis M9010W Washing Maching

I was washing my clothes and then all of a sudden my washing stops working all the lights go off. So I changed the fuse in the plug that seams to still not work any advice please?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 262 Answers

SOURCE: Whirlpool Ultimate Care II washing maching but will not spin.

lid switch is bad chance are you can by pass this by removing the timer header and crossing the outer wire on the lid switch that it mounted closest to the lid not the power cord this will tell you if you need a switch

Posted on Dec 03, 2007

Ad
  • 1294 Answers

SOURCE: Washer spins but not enough to extract water from clothes or tub.

Check your exit hose spigot, it may be clogged. This is if your filter is all clean. There should be air for passage in the standpipe behind. Your hose should not fit airtight into the standpipe and neither too deep into it. Snaking out your standpipe would be good too.

Rate me pl.....if helped.

Posted on Dec 31, 2007

IrishDruid
  • 2712 Answers

SOURCE: Kenmore frontload washing machine doesn't spin

If your washer won't spin, check these:
It doesn't pump or spin If it doesn't pump water out or spin, check to see if the motor is running, then proceed as follows:

  • If the motor is running, your washer probably has a frozen pump pulley or a broken pump belt. To check the pulley, remove the pump from the washer and try to rotate the pulley manually. If it doesn't turn freely--if it's frozen or stiff--replace it. If the pump belt is broken or looks quite worn, replace it--but be sure to check the pump pulley before you change the belt.


  • If the motor isn't running, the lid switch may be defective. If so, the washing machine can't spin and may not function at all. The switch is inside the washing machine main housing near the door frame. Often you have to raise or open the top or front of the washing machine to get to the switch. If it's defective, you need to replace it.


It pumps, but doesn't spin If your washer pumps out the water but doesn't spin, check these:

  • The lid switch may be defective. If it is, the washing machine doesn't spin. The switch is inside the washing machine main housing near the door frame. Often you have to raise or open the top or front of the washing machine to get to the switch. If it's defective, you need to replace it.


  • The motor coupler may be broken. Many Whirlpool®-manufactured washers use a small, relatively inexpensive motor coupling. It's plastic and rubber and is mounted to the shaft of the motor on one side, and to the transmission on the other. Over time, the coupler wears out and fails. You may need to replace it.


  • A belt may be broken. Many washing machines have one or two belts. If a belt is broken or badly worn, you need to replace it with a genuine belt from the manufacturer. (Some washing machine belts are designed with special characteristics not found in automotive belts.)


  • The clutch may be worn. If your washer is a GE, it may use a clutch to come up to the proper spin speed. As the clutch wears out, it may prevent the unit from spinning well or at all. If the clutch is worn, you need to replace it. For this job, you probably want to hire a qualified appliance repair technician.


  • The drive motor may be defective. Many washer brands use a reversing motor. For agitation the motor runs in one direction, for spinning and draining, the other. It's possible for a motor to burn out in one direction and continue to operate in the other. If this happens, you need to replace the entire motor.


  • The transmission may not be shifting properly. Older washers produced by Whirlpool® have a transmission with an electro-mechanical shifter. If the shifter becomes even partially defective, the unit may drain the water but not spin. This is a complex system, if your washer has a shifter problem, you may want to hire a qualified appliance repair technician to repair it.


  • The spin bearing or basket drive may be worn or seized. These components allow the inner tub to spin freely inside the outer tub. When this is the problem, you usually hear a loud sound during the spin cycle. Call a qualified appliance repair technician.


It spins only with the lid closed For safety, washing machines are made so that they spin only with the lid closed. The lid switch prevents the spinning action when the lid is up.

Posted on Nov 07, 2008

  • 1 Answer

SOURCE: Electrolux XL8KG Front Loader Washing Maching

I've found that a similar thing on my Zanussi appears when the filter on the output is clogged. Removing muck and hair from the filter usually solves the problem

Posted on Nov 20, 2008

barkencoa
  • 3463 Answers

SOURCE: No power running to SERVIS washing machine

Try disconnecting the heater element first and see what happens if still same unplug motor and try again, it is a process of elimination.
Plz rate solution.
Thanks.

Posted on Dec 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Elba washing maching wa65tm stops at rinse


have u got a rinse hold switched on.this is to keep clothes from getting creases it holds until someone tells it to complete cyle

Nov 20, 2015 | Fisher Paykel Fisher & Paykel Elba 3.7 cu...

1 Answer

Washing machine wont complete drainage at end of wash cycle


Look under the washer tub where the drain hose comes out and attaches to the pump. Your pump impeller is either clogged or worn out. Try removing the pump and checking from there.

Jan 07, 2008 | Fisher Paykel EcoSmart GWL15

1 Answer

I pushed the button after the washing cycle had start for the purpose of stopping the cycle so that the clothing can soak before washing. When I returned about half an hour later, I pushed the button to...


I am taking this as a machine with a timer knob. If so, you may have to advance the timer manually to get it to go. You may have stumbled onto a slightly dead spot on the timer. I think I would just leave the lid up next time. That will stop everything and give you the soak time you so desire.

Jun 22, 2010 | GE EWA5600GWW Top Load Washer

1 Answer

Whirlpool AWM 045-1000 washing machine has suddenly stopped working and warning light "WATER STOP" has come on. Any ideas for a fix?


Whirlpool AWM 045-1000 washing machine has suddenly stopped working and warning light "WATER STOP" has come on. Any ideas for a fix?

Sep 19, 2009 | Whirlpool Washing Machines

6 Answers

Fisher and paykel 7.5 smartdrive washing machine, no power


If there is power and all your lights are lighting up but you get no responce from the machiene eg no spin, water filling, wash cycle or drain then it will be the sensor for the lid it will have coroded but this is an easy fix , I hope this helps

Feb 20, 2009 | Fisher Paykel Eco IWL16

1 Answer

No power


This is a lack of neutral feed to the door switch. The feed comes from the circuit board which is where the fault lies. However if fitting a new board i would advise replacing door switch as it was probably the initial cause.
Hope this helps & thanks for using Fixya.

Dec 16, 2008 | Washing Machines

Not finding what you are looking for?
GE WPXH214A Front Load Washer Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...