What are the box dimentions for two 12 soundstream xpro

Reset, page 21 of the manual.

Manual and Factory Support

VRN-65HB-manual.pdf - Soundstream

https://soundstream.com > uploads > 2019/09 > V...
PDF
VRN-65HB. 2 DIN 6.2' Monitor. DVD/CD/MP3/MP4 Player. AM/FM Radio. Support Bluetooth. Support Mobile Phone link. Build in GPS. Owner's Manual.

• 
  

  Support - Soundstream Technologies

  https://soundstream.com > support
  VRN-DD7HB Android 9 Update and Older (Older than 2021 Model). (Above Not Compatible w/ Android Version 10 or 11 Phones). VRN-64HB / VRN-74HB - Android 7 / 8 ...

L-port tuned to 32 hz

The smaller terminal is most often the negative terminal. This link has a great way to test if you are unsure.

http://www.techguys.ca/howto/speaker.html

need the ohms of each coil and what the amp can handle in ohms

la potencia em RMS is DUAL 4-OHMS at 300 RMS

measuer dimentions of cone without metal mounting ring.

I have Ref-1000s with two Pioneer TS-W1200C 4-ohm subs bridged in series. So it is 8-ohm mono load, easy for an amplifier, long durability, less heating, low current consumption. I have heard that this amp might break if used with low impedance loads.

• Warranty Terms - Parts 1 year limited
• Warranty Terms - Labor 1 year limited
• Product Height 12"
• Product Width 12"
• Product Weight 7.8 lbs.
• Product Depth 6-1/2"
• Subwoofer Size 12"
• Resistance (Ohms) 4 ohms
• Bottom Mount Depth (inches) 10"
• Woofer Composition Mica-reinforced woven glass fiber composite
• Woofer Surround Rubber
• Peak Power handling 1300W
• RMS Power Range (Watts) 380
• Cutout Diameter or Length (inches) 12"
• Sensitivity 84dB
• Frequency Response 30Hz - 1kHz
• found at:::---- http://www.bestbuy.com/site/Sony+-+Xplod+12%22+Single-Voice-Coil+4-Ohm+Subwoofer/9202481.p?id=1218057724056&skuId=9202481
  

12 " subs need 1.5 cubic feet sealed box...

You can get the schematic from SoundStream. If you get the schematic and need help, email it to me at:
[email protected]

If the amplifier does nothing, post the DC voltage on each of the pins of the SG3525 (or whatever IC they're using in the supply). Use this as a template:

Pin 1:
Pin 2:
Pin 3:
Pin 4:
Pin 5:
Pin 6:
Pin 7:
Pin 8:
Pin 9:
Pin 10:
Pin 11:
Pin 12:
Pin 13:
Pin 14:
Pin 15:
Pin 16: