Question about Toshiba Tecra S1 Notebook

1 Answer

Hi, i got a toshiba S1 PT831C with 1500Mhz cpu. Now my S2 died, so i placed the memory from the S2 in the S1, that worked, but now also the proc, even if its 100Mhz faster than the old one (its the same type proc) .. So i putted the cpu in the S1, it boots up, but says 1200Mhz, flashed the bios to 1.50, latest on the toshiba site. And in windows it says proccessor type: 1600Mhz Please help me. Regards,

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 72 Answers

Its the same type of processor but the thing is their different speeds and one cold be hit by the mobo processor limiter and thats whats casuing it to not show up right, since you flashed the bios it nothing more to do. its onlya prob if you start having issues its nothing to worry aout other than that.

Posted on Jun 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i test marine gyrocompass out put synchro and stepper


SYNCHRO MOTOR HAS THREE WINDINGS LIKE A STAR SOMETHING LIKE A THREE PHASE SAY S1,S2,S3 AND ANOTHER TWO WINDINGS CALLED R1ANDR2 , WHEN YOU SUPPLY EG 110VAC ACROSS R1 AND R2 IT GIVES A SECONDARY VOLTAGE ON THE S1,S2,S3 , SO YOU CAN CHECK IN THE MULTIMETER AC RANGE ACROSS S1-S2,S2-S3 AND S3-S1 , YOU SHOULD GET SAME VOLTAGE ACROSS ALL THESE POINTS .....hope that clears the question

Nov 22, 2014 | Boating

1 Answer

Wiring diagam for spit system mitishabishi airconditioner


S1 and S2 is the 220vac S3 is the commuicating connection to the outside airhandler. The solution is on the control board that handle the remote funtions

Jan 21, 2012 | Mitsubishi Mr. Slim MXZ30TN Air...

2 Answers

Skmei 0817 black digital watch-user manual


WATCH KEYS: Top RIGHT=S1 Bottom RIGHT=S2 Bottom LEFT=S3 Top LEFT=S4
SKMEI WATCH User Manual Model 0817
Operating instructions:
In normal mode modelDisplay: Week-Minutes-SecondsPress S1 show Month and DatePress S2 button to show Alarm Hours and MinutesModes Covert: Press S3Modes of watch:
In normal display mode: Press S3> chronograph mode (stop watch)>time setting mode>>>(then back to beginning)
Chronograph function:
In normal display mode: Tap S3>enter chronograph mode>
tap S1 to start>
tap S2 to lap time>tap S2 read time>tap S1 to stop>tap S3 to exit tap S1 to stop
tap S2 to reset>tap S1 to start ...then begin againChime of every hour ON/OFF:
In normal mode hold S2 and then tap S3, if all icon of week on means Chime ON, otherwise means off.Alarm Setting:
In normal time Mode, tap S3 twice enter into Alarm setting mode, and the Hours flashing Tap S1 to adjust correct hour of your alarm. Pay attention to AM/PM (Military 24 hour display)Tap S2 the Minutes will flash. Tap S1 to adjust correct minute of your alarmTap S3 to save/exitTime & Date Setting:
In normal time Mode, tap S3 three times to enter Time & Date setting mode and Seconds flashing.Tap S2 and the Minutes will flash. Tap S1 to adjust minutes ("H" is 24 hour format)Tap S2 and the Hours will flash. Tap S1 to adjust the correct hoursTap S2 and the Date will flash. Tap S1 to adjust the correct monthTap S2 and the Weekdays will flash. Tap S1 to adjust the correct days (M=Monday, T=Tuesday...)Tap S3 to save/exit.Back-light setting:
Hold S4 will show all kinds of colors (blue, green, red, cyan, purple, yellow, orange) Just stop hold the button, last color lit will be memorized to set as current back light. 9b7a554e-43c1-4abb-a52d-3caf02dd616f.jpg

Jan 14, 2012 | Watches

1 Answer

Bought a generic clip watch from walmart with no manufacture's name on it. The back says MSP74582W batery CR1616 and then A126. Looking to find instructions on how to set alarm, date, and figure out...


Just got one, and haven't lost the instructions yet. First, the 4 buttons are:

S1 - at 4 - Lap/Rst
S2 - at 2 - St/Stp
S3 - at 8 - Mode
Light - at 10

Watch Control
Normal Display: Hour, Minute, Second
Push S1: Alarm time in Hours and Minutes
Push S2: Month, Date
S3: Change function

Alarm and Chime
In Normal Time Hold S1 and the alarm time will be displayed.
Press S2 once and Hourly chime will be on.
Press S2 twice and Alarm will be on.
Press S2 three times and Chime will be off.
Press S2 four times and Alarm will be off.
Press S1 and display will change to normal time immediately.

Setting Alarm Time
In normal time, hold S3 for about 3 seconds, the hour digit will flash and is advanced by pressing the S1 button. Then push the S2 button to change to minutes and change those by pressing the S1 button as above. Push S3 to return to normal time.

To silence the alarm, press S1.

May 15, 2011 | Watches

1 Answer

The sceen is blacked out. wont run tecra s1 old machine model no. pt831c-0zq3v


lcd inverter may have went out,,or ur backlight,,check laptop makers website for solutions and driver downloads

Nov 03, 2010 | Toshiba Computers & Internet

2 Answers

Hi - I've got a Toshiba Tecra S1 which at the moment is refusing to boot up. There is no output to the screen, and the caps lock light is on. I've swapped the HDD and memory out for another but this has...


Have You Checked The Fan/Heatsink Assembly???

Your Heatsink Cooling Fins Might Be Clogged

If So, The Fan Blades, The Heatsink Fins And Assembly Need To Be Cleaned Thouroughly... DO NOT USE COMPRESSED AIR

You Must Disassemble Laptop And Physically Clean these parts

It would be a good idea at this point to also add new Arctic Silver Thermal Paste or Thermal Pads To The CPU/GPU..

Nov 28, 2009 | Toshiba Tecra S1 Laptop Notebook

1 Answer

Can't set time on aqualite watch-field ranger


I have an aqualite field ranger watch too. I lost the information but I found another notice for another watch and I was able to set the TIME as well as the alarm. I am not despairing as to one day set the date correctly! ;-)

The instructions I found are for "LIFELONG Chrono Alarm Sport watch" from Hanig & Company. The watch this particular instructions comes from has a rectangle LCD display that only takes the center of the dial, and only 3 buttons for the functions.

Aqualite has 4 buttons, but one of them is only for lighting the dial only, therefore if we use the 3 other buttons the same way they are described in this manual, it will work.

Aqualite has 4 buttons:
1) top right (we will call it S1 like this manual does)
2) bottom right (this will be S2)
3) bottom left (this will be S3)

As I said the number 4) (top left) is only for light and we will forget it since it is not needed to set our watch.

Setting the minutes, hour, date month and day:
Press S3 3 times, or until the following are flashing in the display : TU and seconds
Set the minute: press S2 once and advance by pressing S1
Set the hour: press S2 and advance by pressing S1
Choose from AM (A), PM (P) or military time (H)
Set the date: Press S2 and advance by pressing S1
Set the month: Press S2 and advance by pressing S1
Set the day Press S2 and advance by pressing S1
Press S3 to bring you to the time display

Setting the chronograph:
The chronograph feature will store and add to the last recorded time interval up to 23 hours, 59 minutes and 59 seconds in the time display.
1. Press S3 (flashing in the display: SU, FR, SA)
2. Press S1 to begin. Press S1 to stop.
3. press S3 to return to the time display.

Setting the lap time:
The lap feature will record from 1/100th of a second up to 23 hours, 59 minutes and 59 seconds.
In the time display.
1. Press S3 (flashing in the display: SU, FR. SA)
2. Press S2 to clear setting
3. Press S1 to begin. Press S2 to stop.
4. Press S1 once and S2 twice to reset.
5. Press S3 to return to the time display.

Setting the alarm and snooze:
The time alarm features with a convenient snooze function which will sound 5 minutes after the first alarm in the time display.
1. Press S3 twice for the alarm mode (hour will be flashing): advance by pressing S1
2. Press S2 once (minute will be flashing)
3. Press S3 to set alarm and return to time display
3. Press S1 to deactivate alarm
5. After 5 minutes, snooze alarm will ring. Pres S2 to deactivate.
6. Press S1 and S2 at the same time to deactivate the alarm at any time.

To test alarm
In the time display
1. press S1 and S2 simultaneously for alarm test.

Hourly chime
Your chrono alarm sport watch ha the option of an hourly chime in the time display.
1 Press S2 and then press S3 to activate hourly chime
2. Repeat process to deactivate

Jul 23, 2009 | Watches

1 Answer

I looked, but didnt come up with what I was looking for. I have an older compaq presario CPU intel 5321SR pentium 4 1500Mhz 1Core BIOS ver compaq 686Y2 v1.05 9-6-01 What would be the biggest CPU for this...


Hi, just looked at your system on the Compaq website.This pc does not support further cpu upgrades.The only upgradable item is the memory. If I can help further contact me on http://www.motherboardsrus.net and use the contact us link Chris the computer doctor 07926-106150

Jun 07, 2009 | Compaq CPQ/Presario5006EA uWave2 K7...

3 Answers

Asus K8N-dl - second processor present but not running...


Hi, Mistyman here. All Asus mother boards that have dual channel RAM slot must have equal ram in each slot. In most cases the paired slots are matched by color for easy ID, some are identified by a printed ID on the mother board. With your board you will have to have run all of your RAM for the one CPU. If you have only one stick this must be in slot one. If you are using two sticks then utilise the dual chanel system that ASUS have and use A1 & A3. To activate the second CPU you will need to install matching sticks of RAM in the B slots. both cpu's will need to have the value of RAM to work together properly. CPU one = slot A for RAM CPU two = Slot B for RAM. Goodluck, the ASUS boards are a value product.

Aug 04, 2007 | ASUS K8N-DL Motherboard

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

k24674

Level 3 Expert

7993 Answers

Are you a Toshiba Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...