Question about Intel D845GVSR Motherboard

1 Answer

Prob have an Intel desktop d845epi i wiped the hard drive clean n when i put the drivers back on every thing was fine but the USB ports would not pick up any of my drivers i went threw the bios every thigh was fine their i went on Intel 2 download the drivers but that didn?t work can any 1 help me

Posted by on

  • 2 more comments 
  • Brandon Jackson Jun 16, 2009

    i installed sp2 n it still didnt work idk what ealse could b wrong my dude

  • Brandon Jackson Jun 17, 2009

    thats the thing idk what the manufactures name i know the motherboards name but it still wont recognize that driver

  • Brandon Jackson Jun 17, 2009

    i went in 2 the boot configuratin nothing appeared in the usb Configuration....... man this is really giving me a headach

  • Brandon Jackson Jun 18, 2009

    i tried hooking my external up n the back and front no response n i thought maby that was 2 much 4 my pc so i tried my thumb drive n still nothing no i havent tried those yet it a company computer i jus took the hard drive out of it n im trying 2 work on it

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 18 Answers

What windows did you install (xp service pack 1 or service pack 2). becouse service pack 1 doesn't fully support all the usb port types.

Posted on Jun 16, 2009

  • 1 more comment 
  • Prabhjeet Singh Jun 17, 2009

    ok. then again install intel INF drivers + usb drivers. if its still does'nt work then right click My computer>properties>hardware>device manager>universal serial bus controllers. look there if its installed properly or not (all shown items should be installed properly).

  • Prabhjeet Singh Jun 17, 2009

    hey try this:


    1. Reboot (or power on) system.
    2. Press "F2" during POST (Power-on Self Test) to enter system BIOS setup program.
    3. Select "ADVANCED" menu using arrow (left and right) keys.
    4. Select "USB Configuration" and press .
    5. Enable "High-speed USB".
    6. Press "F10" to Save & Exit BIOS setup program. ( Hi-Speed USB 2.0 controllers are now enabled and your operating system should detect New Hardware during the next normal boot cycle.
    7. Cancel "New Hardware Found".

    now download this driver

    http://downloadmirror.intel.com/5552/eng...

    also

    http://downloadmirror.intel.com/5492/eng...



    i am sure this will help you.

  • Prabhjeet Singh Jun 18, 2009

    can i know wat type usb device u r using. ru connecting through front panel(front usb) or backpanel. also have u tried the drivers i listed.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Prolems with D845EPI after reinstalling Windows XP


you might have missed something during the re installation process of the xp operating system
did you install service pack 3
http://windows.microsoft.com/en-US/windows/help/learn-how-to-install-windows-xp-service-pack-3-sp3

Test all power and data leads that attach to your hard drive EIDE SATA

the leads from your ((motherboard to your hard drive)) make sure they have a secure dust free connections and are not faulty

computers need power and data to travel through every working device and to continue its cycle and to have an end so any faulty leads will end up with a computer error

Click start control panel administration tools computer management device manager scroll to display adapters + to expand you might see a yellow question mark ? or exclamation mark ! or a red x right click select reinstall drivers
You might need to upgrade your graphics card drivers

you might have to remove your graphics card to make sure the socket is clean
restart your computer the reinstall it this should activate found new hardware wizard
if your computer came with a mother board disk the drivers could be on it

click start control panel display desktop you can select a different desktop from the drop down list
or a browse button where you can select different pictures this may vary depending on your operating system

also you can change the settings for more or less pixels or from the drop down list pick the appropriate level of color range or troubleshoot also select advanced then general dpi normal size,larger size or custom settings
always click APPLY after making any changes


you must now have an internet connection to download the bios updates

hope this helps

Jul 31, 2012 | Intel D845EPI (INTELKD845EPILPAK10)...

1 Answer

I want to take my computer apart but not sure what drivers i'll need once i wipe it clean and put it back together. i tryed once but know my front usb ports don't work


You would use the driver's from the computer's manufacturer's website for your make and model.

Get onlineand got to www.google.com In the google search box type: "MSISupport" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operatingsystem when requested. Download and install the drivers.

Jun 02, 2012 | Intel Motherboard

2 Answers

I have no motherboard CD and how to get new one?


I am giving you a link of official website of intel. From where you can download your drivers and can make your own CD. So click here to go to intel download center. Thanks for using FixYa.

Aug 23, 2011 | Intel D845EPI (INTELKD845EPILPAK10)...

1 Answer

How do I delete files from flash drive--wipe clean


Cleaning a Flash Drive

Put the flash drive into your computer's USB port (assuming you have the proper driver loaded onto the computer). Go to "My Computer" and highlight the drive that shows up, right-click and select "Format." That'll wipe it completely clean.

Or, if you just want to remove the files, do the same thing but instead of formatting, just highlight the files and right-click to delete the file, pix, or whatever.



Jan 02, 2011 | Verbatim 160GB USB FireLite: The "drive...

1 Answer

Hi, I need Intel mother board Audio video & all drives for a D845epi / D845gvsr. Thanks Arjun


All the drivers for you motherboard can be downloaded from the following link:

http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%C2%AE+845+Chipset+Family+Boards&ProductProduct=Intel%C2%AE+Desktop+Board+D845EPI

Nov 16, 2010 | Intel D845EPI (INTELKD845EPILPAK10)...

2 Answers

It won't show up


Use the exact same USB port that you used to install it.
The installation uses a "virtual USB" port.
You also have to use the same user account on the computer. (Use the same USERNAME as when it was installed).

Also, check to see if the computer DOES see it:
Right-click [My Computer]
[Manage]
{Disk Management]
Find your Cruzer in the list or on the graph.
Right-click on it and [Explore]
Copy your homework to your computer desktop.

It should work ok, now.






Oct 02, 2009 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

What pins r used to hookup power,restart and hard drive led need diagram


Hi, =)

You can find them here towards the bottom of the page:
http://www.intel.com/support/motherboards/desktop/d845epi/sb/cs-017171.htm

Under front panel connector.

Perhaps easier seen here:
http://www.intel.com/support/motherboards/desktop/sb/cs-009016.htm

Diagram applies to all MB's below.

Aug 11, 2009 | Intel D845EPI (INTELKD845EPILPAK10)...

1 Answer

Virus (need to wipe cpu)


What you have to do is make a floppy disk with sata drivers on it and get a usb floppy drive, because its intel you need the matrix storage manager. get it from here:

http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=2101&OSFullName=Windows*+XP+Professional&lang=eng&strOSs=44&submit=Go!

Download the matrix storage manager and the read me file on instruction on how to install xp with extra drivers.

Any problems post back

Good luck

Jan 08, 2009 | Compaq Evo D500 PC Desktop

Not finding what you are looking for?
Intel D845GVSR Motherboard Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Tony

Level 3 Expert

2600 Answers

David
David

Level 3 Expert

778 Answers

vsri9

Level 2 Expert

73 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...