Question about Tech Solution TS-4500 Shredder

2 Answers

I have a Techsolutions paper shredder TS4500. The plastic gear that drives one of the cutter bars is broke. It is about 1 and 1/8 inches in diameter with 13 teeth on the outside and a six sided hole in the center. It is 1/4 inch thick.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have the plastic gear(s). You may have bought a new shredder by now but you can let me know. Juan

Posted on Feb 27, 2010

  • dddillon Mar 20, 2011

    I need the first plastic wormgear that is engaging the drive gear on the rotor of the motor. It has about 6 teeth that are stripped and prevent it from turning with any torque at all. I would really like to find a replacement for that gear and fix this machine. please contact me

    dddillon@gmail.com

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a TS4500 that has stopped working. After making sure it was cool, I cleaned amuch of the paper out as possible. it still will not run.

Posted on Aug 09, 2011

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: where do I get a gear to turn the shredder

Her
From: NVTSHREDDER@aol.com
Date: Thu, 9 Jul 2009 11:16:33 -0400
Subject: TS4500 from Winsource Ind.
To:



Rick,

This TS4500 shredder had been discontinued for more than 5 years. The factory did not make any spare parts for this model.

Thanks,

Victor
Customer service

e is my response

Posted on Jul 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Royal 10x Crosscut Paper Shredder (PCUA: 29054E) paper jams.


Try soaking the cutters with soapy water, yes it works. Oil after you are done.

Aug 02, 2009 | Royal VF1012mx Shredder

3 Answers

Where do I get a gear to turn the shredder


Her
From: NVTSHREDDER@aol.com
Date: Thu, 9 Jul 2009 11:16:33 -0400
Subject: TS4500 from Winsource Ind.
To:



Rick,

This TS4500 shredder had been discontinued for more than 5 years. The factory did not make any spare parts for this model.

Thanks,

Victor
Customer service

e is my response

Mar 22, 2009 | Tech Solution TS-4500 Shredder

2 Answers

Tech Solutions shredder


It sounds like you may have a gear with a broken tooth you should contact the manufacturer to get more info. Usually when this is the case it will shred good for only a few revolutions and then reversing backs the gear up to a position that allows it to turn the cutters until it once again reaches the area where tooth is missing.

Mar 11, 2008 | Winsource Tech Solutions TS-4500 Cross-Cut...

2 Answers

Paper shredder


The only solution with respect to safety is to order a new switch from the companuy that manufactures/sells this shredder, and mount it according to the manufacturer/sales company's instructions.
If you want to bypass the safety of the machine, just keep the cables (should be 2, + eventually a ground cable) open, or shorted, depending of the machine's configuration. Remember that this is on your or your collegaues own risk!! A shredder can easily bite your finger off!

May 19, 2007 | Tech Solution TS-4500 Shredder

1 Answer

Need to re-adjust the paper sensor switch


I have one of this model. You can see 6 holes with screws in them. The 7th hole is under the serial number paper tag near where you see a deformity of the plastic. I have not taken it apart & I don't know if the sensor is adjustable.

May 22, 2007 | Tech Solution TS-4500 Shredder

2 Answers

TS4500 Shredder


there is one screw under the s/n sticker

May 08, 2007 | Tech Solution TS-4500 Shredder

Not finding what you are looking for?
Tech Solution TS-4500 Shredder Logo

709 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tech Solution Office Equipment & Supplies Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

quennie732

Level 2 Expert

398 Answers

Are you a Tech Solution Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...