Question about Jensen SMP-115 MP3 Player

1 Answer

Light will come on," MP3 player" Displays and then turns off

I put a new battery in my MP3 Player, push and hold the power button, the screen lights up with "MP3 Player" and then the screen goes dark ! When I push and hold the power button a second time........NOTHING ! If I take the battery out for a few seconds, reinsert it and hold the power button, It does the exact same thing.
When I connect my MP3 Player to my computer using the USB cord, it lights up, and displays "ready", and when downloading songs to the MP3 player it displays "write",
I am able to view the list of what songs are on it, and everything there is good ! It just will not PLAY !! Please help ! I need my tunes ! thanx !!!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I formatted it and re loaded music back on and now it still does the same thing so I took it back to where I got it and exchanged it

Posted on Jun 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

OK PEOPLE!! have asked this same question over and...am getting the run around...please don't make me continue asking for help with this question. its a sandisk mp3 mini clip, and this issue is getting any...


Use SanDisk MP3 Players
SanDisk is an electronic device manufacturer that creates various types of MP3 players under the SanDisk Sansa product line.
The SanDisk MP3 players range in storage capacity, starting at 512mb, and are intended to operate on the Windows operating system.
Most SanDisk MP3 players also include a built-in video player with a color screen, an FM radio tuner, and a memory flash card slot to expand the MP3 player's storage capacity.
Use SanDisk MP3 players to take your computer's MP3 library with you and listen to music wherever you go.

1. Verify that your computer meets the operating specifications required to sync the SanDisk MP3 player with the PC.
All SanDisk MP3 players require Windows XP or later; Windows Media Player; and a USB 1.0 port. A USB 2.0 is important if you want high-speed music syncing.
2, Check that the SanDisk MP3 player has a full battery charge.
All SanDisk MP3 players have a rechargeable lithium ion battery, and some SanDisk devices have a replaceable battery.
The battery icon on the top right-hand side of the SanDisk MP3 player's screen displays the current status of the battery's charge.
If the battery is low, recharge it before using the SanDisk player for the first time.
To charge, connect the player to your computer's powered USB port using the included USB cable.
The SanDisk player's screen will display a yellow charging icon.
Unplug when charging is complete.

3. To turn on the SanDisk MP3 player for the first time, unlock the "hold" switch on the top of the MP3 player by sliding it so that the orange tab does not appear.
Then, press the "power button" once.
Wait for the SanDisk MP3 player to respond.
The thumbweel of the player will flash a light and the screen will turn on to display the player's menu options.
Turn off the SanDisk player by holding down the player's power button for two seconds.
Wait for the screen to display "Goodbye" before releasing the button.
4. Practice resetting the SanDisk MP3 player to solve critical software errors and to fix the MP3 player if it freezes.
To reset the player, hold down the power button for fifteen seconds.
This resets the MP3 player to its original factory settings and can help resolve any problems you encounter while using the SanDisk MP3 player.
5. Connect the SanDisk MP3 player to your computer using the included USB cable.
Once the computer has sensed the connected device, the SanDisk player's screen will display "Connected" and the SanDisk Portable Media Player will be listed under Other in your computer's My Computer window.
6. Add music to the SanDisk MP3 player.
Double-click the Portable Media Player listed in the My Computer window.
Double-click the Music folder.
Select the MP3 files that you wish to load onto the MP3 player and drag them into the Music folder.
The player will load them into its internal memory and make them available for playback once the device is disconnected from the computer.
7. Sync your MP3 song playlists from Windows Media Player to the SanDisk MP3 player.
Create a playlist in Windows Media Player and connect the SanDisk MP3 player to your computer (see Step 5).
Once its connected, Windows will display a dialog box. In the box, click "Sync digital media files to this device."
In the next window, click Set Up Sync. In the menu, click Personal Playlists and then select the playlists that you wish to transfer to the SanDisk player.
Click the Add button then push the Finish button to transfer your Windows Media Player playlists to the MP3 player.


Aug 09, 2013 | SanDisk Clip Audio Players & Recorders

1 Answer

How do you turn it off? please...Philips MP3 player


Turn the MP3 player device on. The power button on most Philips MP3 players will be in the shape of a circle. The button will have a symbol that displays a circle with a slash through it. Hold this button down for approximately three seconds or until the MP3 player's screen begins to light up.

Power off your MP3 device. The same button that powers the device on will allow you to power it off as well. Press and hold the power button down until the screen goes blank. This will be your indication that the device is off.

Feb 28, 2011 | Philips Audio Players & Recorders

1 Answer

Won't shut off screen displays 012510-213901 this is a sandisk sansa clip+ 4gb purchased yesterday


Push up/press power button and hold for 10 to 20 seconds, It will turn off.
What is your firmware? you should update the new firmware at sandisk forum,
http://forums.sandisk.com/sansa/
good luck

Jan 26, 2010 | SanDisk Sansa Clip MP3 Player

2 Answers

My view wont do anything, when i turn it on the only thing it does is turn the dial light blue, nohing else, when i plu it in, nothing. the blue light will stay on for however long the battery lasts, is...


Solutions are in order of increasing probability of data loss AND device recovery.
Screen messages are loose approximations

A Soft Reset
1. Hold Power switch up for 5 seconds.
2. Screen displays "Goodbye".
3. Restart

B. Hard Reset
1. Hold Power Switch for 30 seconds
2. Restart

C. Recovery Mode
1. Hold Power Switch for 5 seconds to switch device Off
2. Move switch to Hold
3. Press and hold Home button
4. Connect USB cable to device
5. Screen displays "USB" in small type and "16 MB Format" shows up in My Computer
6. Copy firmware files to "16 MB Format" drive letter
7. Disconnect USB cable
8. Screen displays "Firmware update"
9. Restart device

C. Force Format (This one wipes the data partition. Make sure all needed music/pictures/video exist elsewhere)

1. Hold Power Switch for 5 seconds to switch device Off
2. Move switch to Hold
3. Press and hold top/North/up of Scroll Wheel
4. Connect USB cable to device
5. Screen displays "Format and lose data"
6. Press right/East on Scroll Wheel to confirm
7. Screen displays "Formatting"
8. Restart device

D. Manufacturing Mode (included for completeness only)
1. Hold Power Switch for 5 seconds to switch device Off
2. Move switch to Hold
3. Press and hold centre of Scroll Wheel button
4. Connect USB cable to device
5. Windows detects a new hardware device
6. ???
7. ???
8. ???

Dec 27, 2009 | SanDisk Sansa View 8GB MP3 Player - Black

1 Answer

Rebuilding


You need to use the Recovery Tool from Creative's website at support.creative.com

Creative Zen
Try another PC or another USB port
Make sure the hold/lock is not engaged
Reset
Check for firmware update on Creative's website
Get Recovery Tool from Creative
Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.
If all else fails, check with this guy:
http://www.mycreativefansite.com/2007/05/myzenchecker-tools-guide-to-problem.html
Creative Zen – Formatting
Step by step instructions for formatting a player
1. Detach the player from the PC if it is connected, and turn off the player.
2. Press and hold the Play button while powering on the player.
3. When the player displays the Creative logo, release the Play button
4. Select Format (All) and select Yes to format the player.
5. After the player has finished formatting, select Reboot.
6. Re-transfer the tracks to the player.
-Tha Mp3 Doctor

Sep 23, 2008 | Creative Labs Zen Digital Media Player

1 Answer

Sansa E250 Black screen lighted wheel, wont do nothing else.


These are the most common methods for recovering Sandisk's Sansa Mp3 Players. I have been almost universally successful in recovering Sansa players using one or a combination of these methods. These methods do not work if you are having synchronization or music format issues - they are for recovering a player that will not power up, freezes, flashes, is not recognized by the computer, and a host of other issues.

Reset the Sansa Player first. On most models, restart is done by holding the power button in for 15 seconds or longer. Check your specific manual to be sure. The manuals are available from the Sansa website if they have been misplaced.
Download the Sansa Recovery Tool from the Sansa website.
Format - Erases Everything: Connect your Sansa player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "Sansa 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
Firmware Upgrade- Erases Everything: Get the latest firmware upgrade from Sansa - it updates the firmware and erases every song in the player all at once. Note: this method doesn't work if already have the latest firmware. Go to this website and click "Firmware Updater" to find out: http://www.sandisk.com/DriverDownload/driverList.asp
If these fail, then:
Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.
If you get the problem where MTP Device keeps popping up continuously, uninstall the “MTP Device” by going to Start à Control Panel àSystem à Hardware à Device Manager (you computer may vary slightly, depending on Windows Version).
You may have to restart your computer after each of these methods to get them to work properly. Disconnect your Sansa player BEFORE shutting down your computer.
-Tha Mp3 Doctor

Apr 09, 2008 | SanDisk Sansa e250 MP3 Player

1 Answer

Blank Screen


try holding both the play and power button at the sametime for 20 mississippi.

Dec 26, 2007 | SanDisk Sansa e260 MP3 Player

1 Answer

I was using my sansa e250 when it froze


perform soft reset on the device press and hold the menu/power button for about 30 secs until the player turns off.

Dec 03, 2007 | SanDisk Sansa e250 MP3 Player

1 Answer

My mp3 player wont work


ok! easy solution for you^^ 1) Make sure your Zen is powered OFF. if the blue light is on and won't turn off, here's what you do: set the hold button at the top of the player to the ORANGE position, then hold your power button for 3 seconds. the keypad will flash and your player will power down. 2) push in the reset button with a pin or other fine implement. the reset button is located on the bottom of the unit, right next to the connector. your player should power up as normal now. charge it fully! your computer should be able to read it during it's charge as long as you leave it powered on^^ I hope this helps you^^

Mar 25, 2007 | Creative Labs ZEN SLEEK MP3 Player

2 Answers

Mp3 won't turn off and the screen doesn't work


My Sansa wouldn't turn off and I got it to do so by pressing the center button while holding the main menu button down. But then once I did, it wouldn't boot back up.

Mar 24, 2007 | SanDisk Sansa e200 MP3 Player

Not finding what you are looking for?
Jensen SMP-115 MP3 Player Logo

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jensen Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5190 Answers

John
John

Level 2 Expert

509 Answers

Kazim ERGUNEY
Kazim ERGUNEY

Level 3 Expert

577 Answers

Are you a Jensen Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...