Question about Logitech QuickCam Express Web Camera

1 Answer

I can't seem my image when i am on a video call, they see me I can see my image when checking device but when in a video call there is an X across the pic of the camera where my image should be

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Don't know what messenger you are using? I will send you two fixes and if you need the other two I will send them to you.
Normal 0 See section C. Windows Live Messenger in the info below to setup the Audio & Video.
Also send this to your family and friends so they have their computer setup properly.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

  1. Windows Live Messenger:
http://www.microsoft.com/downloads/details.aspx?familyid=d78f2ff1-79ea-4066-8ba0-ddbed94864fc&displaylang=en
  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jun 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot focus uniformly across the projected screen. This seems to be more than a focus problem in that some areas of the image seem blurry as opposed to out-of-focus. Also, in what may be a related...


try bringing the screen up as close as possible to the projector and still get a focused picture. check keystone here and also for image clarity. if you still have problems, check for dust or moisture etc in the optics. check the lamp for a clean front surface. clean the air filter also. Try a different image source for differences

May 20, 2011 | Eiki LC-XB25 Projector Multimedia...

1 Answer

RCA 46 INCH REAR PROJECTION TV


that is one truly unhappy device..sounds like the video board is on it's way out..could be the imaging system too, but then, you'd be looking at a whole system replacement

Mar 28, 2008 | Televison & Video

1 Answer

A couple of days ago I turned on my brand new (about 6 weeks old) Samsung 50'' plasma pn50b650 I noticed an imperfect picture at the top of the screen. Upon closer inspection, there were about 4-5...


U freeze video games 10-20 mins in video game alot of time.Never pause or freeze any kinds of video image in Plasma tv.It very easy cause to burn in Plasma tv problems alots.

Feb 25, 2010 | Samsung PN50B650 50 in. HDTV Plasma TV

2 Answers

My problem is my sharper image mp4 player isn't download videos


If it's not downloading videos, first you need to check the requirements. If you're trying to download a video from the computer to your MP4, you have to make sure that the device has enough space to accept the video.

Example: the video size is 700MB, but you only have 600MB remaining storage on your MP4, then the device could never afford a file size that is larger that the free storage.

Check the supported file format of the device. Refer to the user manual of your device to see what are the supported video file formats. Let's say the device could support .avi file, but you are trying to download .3gp or other file format, the device would not accept it.

Kindly refer to the user manual or contact the manufacturer for more details about your device.

Thank you!

Jan 24, 2010 | Sharper Image 1612911 MP3 Player

3 Answers

I have an hp ze2000. I hooked it up to an external monitor. When I unhooked it and restarted it my laptop screen now stays blank. Who knows the answer to this?


I think you have to reset through setup F12 or is it F8 restart and push one or the other, then locate menu for screen click to enable.

Haven't come across this before. Best I can suggest?

Nov 16, 2009 | HP Pavilion ze2000 Notebook

1 Answer

Hi, I seem to have a problem with my Finepix Z1 digital camera. When I take a shot it seems to work ok, and the initial review image seems fine as well. But when I go back and review the image on the...


The clue is with the video.
The video function does not use the shutter. Lines on photo's or over exposure is due to the shutter not closing completely over the lens when you take a picture.
It will require cleaning which means opening up your camera and accessing the lens unit

Oct 28, 2009 | Fuji FinePix Z1 Digital Camera

1 Answer

No picture when recording have sound just lines going through len


Seems ccd imager is bad in your Sony camcorder that you get noisy picture in recording. Let me know exact model number of camcorder to provide you more info.

Jun 05, 2009 | Sony Handycam DCR-TRV255 Digital Camcorder

1 Answer

Audio problem


problem like this cause of droping of your device, or pulling it away even your windows working.
now, seems your device experience problem as this, do this to check your audio:
click start>select control panel> select icons Sounds and Audio Devices>
On volume tab>there is device volume click the advanced tab below on it to check your volume control, leave boxes uncheck.

then, check your speaker settings click advanced>tab below it, then select your speaker set up.

then, now check your audio on sounds and audio devices properties click the Voice> tab then
Test hardware>.

Good luck. hope you can make it. and it help you both. thank you.

Jul 06, 2008 | Microsoft LifeCam VX-1000 Webcam

1 Answer

INNO3D 8800GT OC OVERCLOCKED EDITION (FAULTY)


This may not be much of a solution but it seems odd that a video card would have some white lines gong across the screen. I would say its a driver error or the monitor is busted. Only way to tell is if another monitor is used on the system.

May 03, 2008 | InnoVISION Multimedia Technologies GeForce...

1 Answer

My scanner always scans with blurry lines across scanned images from it


Hi,

I believe that you are trying to scan via HP solution center.
Did u tried scanning from Scanners and Cameras in control panel, and did u notice any lines?

If u get the same lines, we have to remove the USB Composite device and imaging device drivers.

1.Right click on MY computer ->Properties->Hardware->Device manager.

2.You will get Device manager window popping out.

3.Check for Imaging Devices, click on + sign, then u will see "hp photosmart c3100" right click on it and click Uninstall. Then, Scroll down to "Universal Serial BUS controllers".Click on the (+) sign.

4.Check for the "USB Composite Device" and right click on it, click Uninstall.(IMPORTANT NOTE:wE HAVE TO UNINSTALL THE PRINTER'S USB COMPOSITE DEVICE, TO KNOW WHETHER IS THE PRINTER'S USB COMPOSITE DEVICE, RIGHT CLICK ON USB COMPOSITE DEVICE AND PROPERTIES,look for wat location says, Eg -LOCATION : HO DESKJET F300)

5.Disconnect the USB and reboot the PC.

6.Connect the USB after reboot, you will get popup "Found new hardware".Then the Drivers will be installed Automatically.

7.Try scanning.Please let me know after following the steps!

Feb 09, 2008 | HP Photosmart C3135 All-In-One InkJet...

Not finding what you are looking for?
Logitech QuickCam Express Web Camera Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2909 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18411 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...