Question about Microsoft Xbox 360 Wireless Controller

1 Answer

Can't start my controller is almost dead, only green light is blinking i cant start or do any thing with my controller

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 355 Answers

If you're using an HDMI connection between the Xbox 360 and the TV, it might be that. When using HDMI, the Xbox won't boot up until it knows what the TV is capable of displaying. Although the controller will turn the console on, it won't sync with the console -- and it's not a controller or console problem, but just a symptom of the fact that the Xbox won't get to the point where controllers will sync until it can properly communicate with the TV. I'd recommend turning off the TV and the Xbox, disconnecting the HDMI cable and re-connecting it after making sure the contacts are clean. Then turn the Xbox back on first; you'll likely to see the same behavior. Finally, turn the TV back on. With it being switched back into HDMI mode, it just might "kick-start" the Xbox into a good communication link across HDMI. Hope that helps.

Posted on Jun 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Green blinking lights


When you get a Red Light and then a flashing green light (5 green blinks and then a yellow blink) it normally indicates that the battery is dead flat. When this happens you MUST connect your device to the charger that was supplied with the PlayBook (it supplies more power than a standard BB charger) and then the device will automatically power up when ready. If you try and use a USB or standard BlackBerry charger it MAY NOT power up correctly.
wall light

Jun 07, 2012 | Fujitsu AOU18CL Wall Ductless Outdoor Air...

2 Answers

Emerson LC320EM82 S red light will come on and when you go to power the tv on it blinks green and never turns on


Power supply board is dead,if green light on keep blinkings,notthing come on.Power green light is solid,nothing come on.Than ur Tuner signal board is dead.

Feb 09, 2010 | Emerson LC320EM8 32 in. LCD TV

1 Answer

Power goes out and cant turn unit back on. Green light continuously blinks, it turns on by itself twice and now green blinking light is for ever. help...


Unplug replug about an hour later,if the same problem than ur backlight video board it dead.Need it replaced.

Dec 10, 2009 | LG 32LC7D Television

2 Answers

Gamestop Edge PS2 Wireless controller wont work. New batteries and the square control (router) box just keeps blinking green. I pressed the button for reconnect and it still does nothing I need...


If the light on the controller is flashing then the batteries are still good. There is a small reset button on the receiver that came with the controller. use a needle to reset it while it is still in the ps2. make sure that the ps2 is turned on and the green light is flashing on it. it should blink a few times and then the light on the controller should turn red. once it does then press start and your good to go.
Hope this helps!

Nov 08, 2009 | Gamestop Edge Wireless Controller for Xbox...

1 Answer

My xbox controllers will not charge with the plug in kit. The light turns red, then either immediately green, or it starts to blink red-off-red-off.


I had the same problem. The Battery pack on mine was dead for a long time as i havent touched my Xbox 360 in a while. So
SOLUTION
Step 1. Plug the play and charge cord into the controller
Step 2. If Light turns green within a minute or so, Unplug the play and charge cord and go to Step 1 (Repeating this process until the light stays red on the play and charge cord (3-10 times))

Oct 08, 2009 | Microsoft Xbox 360 Controller

1 Answer

Power light blinking


That is because either you screen is dead(test by connecting a exteral monitor) or you motherboard is dead and I have been seeing many dead motherboards as of late

Sep 19, 2008 | Toshiba Satellite A45-S250 Notebook

1 Answer

Mitsubishi TV WS-65713


mine is doing the same thing. It started when I unplugged it to move to a new location. Can some one please help me!!!!

Sep 19, 2008 | Televison & Video

2 Answers

Acer Al 1714. LED light is blinking (orange not green).Monitor black.


Well, suddenly it worked again. But I waited the whole day >.>

Aug 22, 2008 | Acer AL1714 17" LCD Monitor

Not finding what you are looking for?
Microsoft Xbox 360 Wireless Controller Logo

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Video Game Consoles & Games Experts

marley mcelhinney

Level 3 Expert

490 Answers

Tre Elkins

Level 3 Expert

643 Answers

Martin Murray

Level 3 Expert

1623 Answers

Are you a Microsoft Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...