Question about Averatec 3200 Notebook

1 Answer

Screen is blank on my averatec 3200.it powers up,but thats it

Posted by on

  • mwknitro Jun 16, 2009

    i have tried that with no luck.could memory card be bad.any more help would be much appreciated.

  • mwknitro Jun 16, 2009

    it has only 1 memory slot.anyway,i have it fixed.i disconnected power and held power button for 30 seconds,and it worked.dont know why,but it did.thanks for responding.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Averatec Master
  • 2,404 Answers

Try reseating the memory one stick at a time in each slot one at a time and turn on the laptop after each stick reinsertion.

Posted on Jun 16, 2009

  • Ben Wabnick
    Ben Wabnick Jun 16, 2009

    Try another known stick of memory that you know is good and try it in each slot cause it still could be a multiple problem with bad memory and one slot being bad.



×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have an Averatec 3200 xp home edition. It was a gift. All that came with it was the power cord. How do i reset factory settings?


If laptops do not come with an installation disc, sometimes there is a setting in the BIOS which will allow reseting to factory settings. When the computer is first turned on, it will usually provide a specific key to access the BIOS or setup screen.

Mar 06, 2011 | Averatec 3200 Notebook

1 Answer

My Averatec laptop's screen is going out and if


Seems to me the inverter is gone if you replace the inverter it will work like a charm

Dec 31, 2009 | Averatec 3200 Notebook

1 Answer

Blank screen


Look very closely at the screen when its on, see if you can see a faint image in which case the ccfl tube in the screen will be dead. Also try the laptop on an external monitor.
Otherwise if you know what your doing, remove the battery, hard drive, optical drive, all but one stick of ram, modem/wireless card and try again. There is a small chance it will be the cpu or motherboard.

Jun 16, 2009 | Averatec 3200 Notebook

1 Answer

I have an averatec 3200 laptop.no display


Yes..most probably its HDD. Remove the hrddisk and try booting. If it displays, no HDD.then the prob lies with HDD.

Jun 07, 2009 | Averatec 3200 Notebook

1 Answer

Averatec 3200 Series Laptop


If you have access to another machine you can create a disk to fix the ntldr issue. Please see the following website. http://www.tinyempire.com/notes/ntldrismissing.htm

Mar 18, 2009 | Averatec Sotec 31100 and 3200 Series...

2 Answers

Screen wont work


If cd pops in and out it is defective . This can stop unit from booting.

Apr 20, 2008 | Averatec 3200 Notebook

1 Answer

Processor issue? bios/motherboard?


First, Pull the hard drive. If the hard drive shorts out it can cause all sorts of problems. Generally it detects Hdd before mouse and keyboard.

Apr 18, 2008 | Averatec 3200 Notebook

1 Answer

Averatec 3200 batery overheated wouldn't go off/now wil not come on


you may have fried the battery test if u can, but if it overheated u could of fried any of your hardware components which would also caused the screen of death

Nov 25, 2007 | Averatec 3200 Notebook

1 Answer

1/3 screen is blank and loose power jack


The LCD needs to be replaced. As for the D/C Jack its the sort of laptop an engineer would have to play by ear. Or in otherwords work it out as they go along. Try removing all of the screws that you can find and be careful that you know where the screws go back afterwards. You might need to flick the hinge covers off to access the rest of the laptop. They also tend to have plastic clips all around them.

Aug 28, 2007 | Averatec 3200 Notebook

Not finding what you are looking for?
Averatec 3200 Notebook Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Averatec Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

k24674

Level 3 Expert

7993 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you an Averatec Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...