NEED ASSEMBLY INSTRUCTIONS FOR A JOLLY JUMPER BASSINET

hi
here is the link to the instructions
http://www.eddiebauer.djgusa.com/can/DJGFiles/ProductDocuments/10330C_10332C_10339CAug282007.pdf

I have a bebe fina kidsline bassinet that I am reusing and I need assembly instructions?

It's not meant to be removed but you can if you are careful. You can make a small cut at the base and wiggle it off. I needed to remove the chip board base from the frame and fabric first. The cut won't be seen once the mattress is back in or you could sew it up again. The top hood part you can't remove but I soaked it in a shallow wide container and rinsed well under theach tap. Came up great with a bit of Napisan and bleach! Hope that makes sense!

Hello,

Click on this website. I would try my best to find your model number because the site allows you to search for instructions for current model and old models. http://www.gracobaby.com/CustomerService/ProductInstructions/Pages/default.aspx?page=ProdInst

Thank you

there are instruction sheets here http://www.jollyjumper.com.au/Instructions.htm

robert

Eddie Bauer Instruction manuals
Go to the link and put in your model number to get the instructions.

have a greco bassinet from 2001 model no. 5610nr and lost assembly instructions can you provide?

http://www.summerinfant.com/images/upload/64040.64043%20Natures%20Purest%20Soothing%20Comfort%20Bassinet%202L.pdf The link to the instructions page for the bassinet

go to this web address and you will have your instructions:

www.kolcraft.com/product-instructions.aspx - 48k

See the other posts about this bassinet. It is going to be recalled soon because it has caused a couple of deaths. Please don't use it!