Question about Thetford Porta Potti
How do you remove the C2 assembly to check if there is power to the pump?
can i get a pdf of the removal/replacement instructions before I buy a new pump?
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Hi! Spray blade which closes holding tank with silicone spray. Make sure spray goes under lip of sealing ring. Also spray around holding tank actuator knob allowing to penetrate underneath to shaft. Don't use a silicone grease as this will gum up the works. If you can't get hold of a light silicone spray try using household type silicone polish intended for furniture. Wipe off any surplus as only thin film required.
Posted on Jun 11, 2009
Don't send money. Just go to thetford.com and download info.
Some tips - if seal is old and breaking up make sure you recover all the bits which have fallen into the flush water tank. If new o-ring seal not available use outdoor silicone sealant and allow to set for 48 hours before adding anything other than a small amount of water to test flush action. Electric circuit includes a fuse and microswitch which are both contained within the flush water tank but you are unlikely to have problems with these items.
Posted on Nov 06, 2009
Tips for a great answer:
Jan 31, 2018 | Home
Mar 09, 2017 | RVs
Oct 17, 2009 | Thetford Porta Potti
Jul 30, 2009 | Thetford Porta Potti
Jun 07, 2009 | Thetford Porta Potti
Jun 04, 2009 | Thetford Porta Potti
Sep 05, 2017 | Thetford Porta Potti
193 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: