Question about Kenmore 91112 / 91114 / 91117 Electric Kitchen Range

2 Answers

I have the Kenmore Classic Grille oven, model 911-4698813. The clock/oven control, part WB19x265, works but has stopped lighting up. You can turn the oven on but you don't know what temp. you have it on because it doen't light up. Is there something we can fix in the control without buying a new control? Thanks, Rick

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.





Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Posted on Oct 01, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We have the same problem with our Classic Grille. We bought a new clock/oven control part and it didn't solve the problem (still no light in clock area). Any ideas about what is actually causing the problem? Looks like all the wires are connected...

Posted on Oct 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oven door is locked out - Sears no help


      1. Step 1 Read the display on the electronic oven controls, where the clock and timer normally appear. If the display reads "CLN" while the "Door Locked" light is on, the Kenmore range is in self-clean mode. When the Kenmore range is in self-clean mode, you must stop the cleaning process before the door will unlock.
      2. Step 2 Stop the self-cleaning process by pressing and holding the "Stop/Clear" button for three seconds. The oven lock should disengage after three seconds. In some cases, a malfunction between the control panel and the locking mechanism prevents the door from unlocking.
      3. Step 3 Hold the light switch for several seconds if the "Stop/Clear" button fails to unlock the range door. Engaging the light switch for several seconds resets the entire locking mechanism and overrides the "Stop/Clear" button.

Jul 03, 2015 | Kenmore 30" Freestanding Electric Range...

1 Answer

Electronic Oven Control on my Kenmore 95321range is not working


I just replaced mine and it's an easy fix even if you're only moderately handy. You'll need to purchase a new or refurbished oven control board. This generally is just the internal components and does not include the overlay, if any, for the clock. This will depend on your model. Here's a video showing you how easy it is.

Aug 28, 2014 | Kenmore 95320 / 95321 / 95322 / 95324 /...

1 Answer

Oven stopped working after big power surge. stove still works but oven will not turn on and nor does digital clock


Both the oven and the clock are controled by the main board. The power surge probably destroyed the main board.

Jan 31, 2011 | Kenmore Ovens

1 Answer

Kenmore Classic Grille model 911-469-8813 error F2


Over time I have had to replace the control module at the front of the oven. It gets baked by the oven heat, and unfortunately costs hundreds of dollars to replace. I have avoided further failures by making sure the downdraft exhaust fan is ALWAYS on when the oven is on. This seems to keep it cool enough.

Nov 18, 2009 | Kenmore 91112 / 91114 / 91117 Electric...

1 Answer

The electric circuit breaker kicked off and when it was reset, we are unable to get anything with the oven to work. the time comes on at 12:00 and then it starts beeping and a f 1 light appears


with kenmore F1 is a power failure in side the clock control
your whole clock will need to be replaced
go to www.appliancepartspros.com
type in your model number and look in the control section

Oct 20, 2009 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

We have an electric Kenmore Classic Grille w/downdraft vents and the F1 alarm goes off routinely. It is about 16 years old and otherwise works fine.


Your control module is overheating because of the oven just below it. Be sure to use the exhaust fan every time you turn on the oven, which helps to cool the controls.

Jul 14, 2009 | Kenmore Kitchen Ranges

1 Answer

Have a Whirlpool microwave oven, model MH3185XP. Just stopped wor


In some Whirlpool models, there are more than one fuse, and two or more thermal devices which can interrupt power to the oven.

There should be a "mini-manual" (tech sheet) hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting, testing, and locating components.


d:%5cele%5crepair%5cmicrowave%5cge_hotpoint%5cmini_manual_behind_grille_small.jpgdee77f7.jpg

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

If you don't find yours, or if you want to look at it without disassembling the oven, you can download it here.

You can find helpful exploded view diagrams and order parts by entering your full model number from the tag on the oven here.

Please write back with more details if you need further help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Feb 28, 2009 | Whirlpool MH3185XP Microwave Oven

1 Answer

GE spacemaker xl microwave oven JVM1440 Two weeks ago after I press 6-express cook stopped and all the lights and clock went blank. In a 10-15 minutes it came back on and the clock would have to be...


Assuming that your internal cooling fan is working, I would suspect that your magnetron is failing.

You can usually find helpful exploded view diagrams and order parts by entering your full model number here.

There should also be a "mini-manual" hidden inside the unit behind the control panel or hidden on the
left side behind the grille, which is very helpful when troubleshooting, testing, and locating components.

I would check the cooling fan, then suspect the magnetron.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Nov 07, 2008 | GE Spacemaker JVM1640SJ Microwave Oven

2 Answers

Kenmore electric range 911.9369181


F8 Failure of Electronic Range Control (ERC) Replace Electronic Range Control/Clock (ERC)

Dec 01, 2007 | Kenmore 91112 / 91114 / 91117 Electric...

1 Answer

Can't turn off my Kenmore 47833


check to see if the connections are good on the back of the control board and if they are good then you need to replace the control board (clock) assembly let me know how you make out

Sep 01, 2007 | Kenmore 47834 / 47832 / 47839 Electric...

Not finding what you are looking for?
Kenmore 91112 / 91114 / 91117 Electric Kitchen Range Logo

802 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Cindy Wells

Level 3 Expert

5123 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Kenmore Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...