Question about Sony Handycam DCR-HC30 Mini DV Digital Camcorder

Open Question

Sony LCD not responding

Touch screen non-responsive. Reset did nothing. Got to the calibration screen and got no response when I tried that. Stays on the first 'x' for calibrating. Batteries charged fine and show to be fine. From what I read in previous posts it is either a faulty LCD or ribbon cable? If that is it what are the appr cost to fix this and where?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 169 Answers

SOURCE: Touch Screen not responding to Touch

the flexwire cable is have an openline and that line is connected to the touch screen panel...it have to repaired or replace that flexwire to the service center....in our shop we modified that wire and became more durable than the original wire......:-)

Posted on Sep 02, 2007

Ad
  • 67 Answers

SOURCE: The buttons on my lcd screen does not work

hi, if your lcd's touchscreen is not working only,then not to worry about just replace the lcd flap and its done,its very easyly avilable and easy to replace

Posted on Aug 26, 2009

  • 2 Answers

SOURCE: LCD not responding to touch

how can i calibration my mini dv screen its model(dcr-hc26)?

Posted on Feb 16, 2010

omtronixom
  • 172 Answers

SOURCE: lcd problm

there is 2 types of fault for this....one lcd cable damage or touch panel damage if it is you have replace LCD

Posted on Mar 01, 2010

larry james
  • 287 Answers

SOURCE: I have a sony handycam and I cannot calibrate my

The touch screens in these can shift. Can you rotate the screen and get the screen to work? if so it's possible if your skilled to recenter the screen then resecure it. of course you might end up having to replace it. I have replaced more of them than recentering them . Larry's Electronics ledstiles@hotmail.com

Posted on Apr 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ricoh Aficio 3025 Copier LCD Touch Screen gets hang after calibration


You need to replace the screen to fix your problem. But if this machine is the model I think it is you need a whole new machine.

Jul 23, 2017 | Ricoh Office Equipment & Supplies

1 Answer

Nordictrack COmmercial 1500 console buttons don't work


http://www.fixya.com/support/r10724803-measure_voltage_in_transforme_fitnes

11_17_2011_8_43_24_pm.gifsincerely. Please keep me in touch.

Nov 17, 2011 | Nordic Track NordicTrack Commercial 1500...

1 Answer

My nokia touch screen is not working. Everything else on the phone seems to be fine, just that when I touch the screen there is no response. Please can you help?


Hello there,

There are two major reasons that could be causing the touch screen not to be responding. The first is if the phone fell and the sensor board got bad, and the best solution is to replace the sensor board. To replace the sensor board is quite sensitive so i will strongly advice you seek advice from a specialist that can assist you with that. But if you intend to fix it DIY way, then you can ask and i will direct you through the steps.

On the other, it might be the screen is weak and needs calibration. To calibrate the screen. I will advice you go through the user manual for the steps to calibrate the screen of your phone. If you cannot get any response from the screen, i will advice you replace the sensor board. Because calibration requires you to touch the screen and since it is not responding to touch, it will be pointless trying to calibrate.

Thank you for using fixya.
Caseytech

Sep 21, 2011 | Cell Phones

1 Answer

My sony handycam DCR-SR200 's lcd touch srceen is not giving response whille touching.what to do


If the touch screen of the Camcorder is not working, please follow the troubleshooting steps.


Please make sure that you're using fully charged batteries.


Turn off the Camcorder and turn ON again and check the operation.


Try resetting the Camcorder by pressing the reset button behind the LCD panel.


shajanrs_91.jpg If the issue persists again, please perform LCD screen Calibration and check if that helps.


Please follow the steps below to perform the LCD Calibration


shajanrs_92.jpg shajanrs_93.jpg

If the issue persists, perform a power resetting of the Camcorder. To perform power resetting, please remove the battery pack, turn the Power switch to ON for more than 15 seconds, turn the Power switch to OFF position and then reinsert the battery pack.


If the issue persists even after performing all the above-mentioned steps, service is required.


I hope this information will help you to resolve the touch screen issue of the C



Thanks for understanding.

Dec 31, 2010 | Sony Handycam DCR-SR200 Camcorder

2 Answers

Touch screen will no longer respond to the stylus


First things to try is a normal reset and then a hard reset.


To do a normal reset, press on the reset button on your handheld.


Hard reset is performed differently on different models, check palm website for hard reset instructions:CLICK HERE FOR PALM RESET INFO PAGE


if the touchscreen doesn't work at all, and you can't align or calibrate it, or it presses on wrong spots even after calibrating many times, digitizer (which is the touch part on top of the lcd display) is most likely broken and would need to be replaced. On rare cases reattaching digitizer cable and making sure that the digitizer is clean and intact and properly on its position may solve the issue.



6702b01.jpg



If you are inside warranty the repair may be completely free, contact your dealer or palm.


Outside of warranty, you have 3 options.


  1. Replace digitizer yourself, you can find a replacement from ebay.
  2. Send it to palm for out of warranty repairs, probably around 100usd.
  3. Take it to a local professional who can replace digitizer for you.


Note: In some phones the digitizer may be connected into the lcd in away that it can't be easily replaced. In these cases You will have to replace the whole screen. if the touch is non responsive after the replacement, the issue could be with the connector or then you have a faulty main board

Thanks, let me know if you have any questions and good luck.
Ekse

May 09, 2010 | Vacuums

1 Answer

The touch screen isn't responding very well, sometimes it will react to a tap but mostly the screen is non responsive, the keys work ok when scrolling on a menu screen. any ideas?


first try to calibrate the touch screen.Take all games out turn on then go to the very small ds on the bottom touch screen. If you can't touch it move it with the cross down then hit a. Then select the option all the way to the right it looks like cross hairs that's the calibration screen fallow instructions. If that doesn't fix it it could be a broken screen or a loose ribbon.

Feb 24, 2010 | Nintendo DS Lite Console

1 Answer

My VUs screen is non responsive or enters a different key when one is pushed. how can i callibrate the phone


Touch Screen Settings
1. Tap Menu , Settings , then Touch Settings to
adjust the touch screen’s sound and vibration.
2. If the touch screen is not responding as you expect,
calibrate the screen for touch accuracy.

If this does not work the phone has a restore feature, but you would have to back up everything you put on the phone so you don't lose it.

In the menu there is a master reset.

If this does not work contact the company and see how to send in for repair.

There is no software update for this phone at the moment.

Feb 10, 2010 | LG Vu CU920 Cellular Phone

1 Answer

Touch screen not responsive. LCD screen OK.


Try to calibrate the touch screen .

If not send it to a repair centre they will fix the touch screen for you.

Try here www.satnavrepairservice.com

Regards

Jul 18, 2009 | Garmin Nuvi 680 GPS Receiver

2 Answers

Touchscreen not responding


Try to find how to calibrate the touch screen in the users manual.

May 29, 2009 | Garmin nuvi 250W GPS Receiver

1 Answer

IPaq won 't respond to screen calibration.


So far no fixes. It's just been collecting dust. I think it's a screen response issue, and will probably cost more to fix than to replace (at least for me) in my situation. I'm thinking iPhone....

Jul 08, 2007 | HP iPAQ RX3115 Pocket PC

Not finding what you are looking for?

Open Questions:

See all Sony Handycam DCR-HC30 Mini DV Digital Camcorder Questions

Sony Handycam DCR-HC30 Mini DV Digital Camcorder Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Cameras Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Cindy Wells

Level 3 Expert

5915 Answers

Parshiv Luthra

Level 3 Expert

395 Answers

Are you a Sony Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...