Question about Ariston Technologies L63 Free-Standing Dishwasher

1 Answer

Ariston L63 dishwasher stopped mid cycle with water in base.

Switched off at wall and on again. Beeps once and left green light comes on. Does not start.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

1) Ensure the dishwasher is turned off. 2) (may not apply) Turn the plastic blue lever located under the sink to the vertical position (this opens the valve, so water can go into the dishwasher) 3) Pour powder indo the dishwasher 4) Turn the dishwasher controller to the top position (the 12 o?clock position) ? this is the eco-setting. 5) Press the on/power button on the dishwasher, so that it now turned on (a light will display) 6) Move the dishwasher controller to the ?R? position (it?s on the very left), and leave it there a second or two. 7) Move the dishwasher controller back to the eco-setting (the 12 o?clock position

Posted on Jan 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ariston l63 is not rinsing proper cycle but instead flashing 12hr light


Error messages,
Your dishwasher is equipped with a safety system which is able to detect any operating anomalies. These anomalies are reported by one or two wash cycle indicator lights "G" flashing rapidly.
24463930-0h3kxpflbez5mdeb5anq3st4-3-0.jpg Flashing LED diode above the mark 12h (drying) indicates faulty NTC thermistor. So, could be faulty: thermistor NTC, wiring between NTC and control board, control board.

Dado

May 20, 2014 | Ariston Technologies L63 Free-Standing...

1 Answer

Water valve is not working.


Hi,
Here is a tip that will help you to find out why water will not come into thedishwasher...

Dishwasher Trouble No Water entering Dishwasher

heatman101

Aug 12, 2011 | Ariston Technologies L63 Free-Standing...

1 Answer

Detergent cube does not disolve


Either:

1. the water does not get into the dishwasher open the dishwasher 3-4 times during cycle, you should see some water at least once, if not - check water valve, water level float and water pressure.
2. the pump is clogged - there is water, the motor will run but no water is circulated. Check pump filters, check chopper and impeller.
3. motor in main pump is not working - could be caused by something stuck on the impeller or chopper or could be a problem with the motor itself or control board. Check if line voltage is coming to the motor during wash/rinse cycle.

Good luck,
Vlad
First Choice Appliance

Nov 12, 2009 | Ariston Technologies L63 Free-Standing...

2 Answers

Ariston dishwasher


i have a brand new ariston ll-64 and the wash cycle won't start and two flashing lights

Feb 09, 2009 | Ariston Technologies L63 Free-Standing...

1 Answer

Ariston Elixia LI68 Duo dishwasher will not start


Same problem , i fixed by opening the door compleet then cleaning the bottom of the door with a kitchen cleaning paper that may do it afther that disconect the power compleet whait 1 minut connect it al again and it should work , don't ask me why this cleaning action i just found it out

Feb 05, 2009 | Ariston Technologies Dishwashers

1 Answer

Does not fill with water


fixed problem by throwing machine out into back yard and buying new one. seems to have worked up to now 

Dec 03, 2008 | Ariston Technologies L63 Free-Standing...

1 Answer

L63 Salt light is flashing


goes for short time and 2 ljghts flash the red salt light wont go on

May 16, 2008 | Ariston Technologies L63 Free-Standing...

1 Answer

Indesit Di 67


Tilt your washer forwards. Water will leak from the front but once this has cleared your dishwasher should be ok again. I paid an engineer to come and tell me this. If your dishwasher is not completely level this can sometimes happen. Hope this helps.

Oct 18, 2007 | Indesit 24 in. DI67 Free-standing...

2 Answers

Indesit D167. When cycle selected no water pumping or filling but 1 & 2 green indicators on.


Tilt your dishwasher forwards. Be aware that water will come out ouf the bottom. Once this is clear your washer should be Ok.
Good Luck

Sep 23, 2007 | Indesit 24 in. DI67 Free-standing...

Not finding what you are looking for?
Ariston Technologies L63 Free-Standing Dishwasher Logo

805 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ariston Technologies Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Renee Knafel-Bullock
Renee Knafel-Bullock

Level 2 Expert

278 Answers

Are you an Ariston Technologies Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...