Question about Kenwood KDC-MP628 CD Player

1 Answer

I lost the wiring color codes for my kenwood KDC-MP628 CDReciever

I am switching my kenwood from a honda accord to a geo storm and i need the wiring color codes so i can attach a new adapter to connect to the car

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

Http://www.tehnomagazin.com/Auto-radio-car-connector/KENWOOD-Car-Radio-Wiring-Connector.htm for the deck
.
1) Remove the ashtray and the two outermost screws exposed in the ashtray cavity.
2) Remove two screws from each side of the dash console.
3) Remove the climate control knobs.
4) Unclip the trim bezel and remove.
5) Remove four screws securing the car stereo to the dash.
6) Pull car stereo from console releasing antenna and connectors.

Constant 12V+ Red Switched 12V+ Orange/Yellow Ground Black Illumination Red/Green Dimmer Green/Red Antenna Driver's Pillar Front Speakers 6 1/2" Doors Left Front (+) Orange Left Front (-) Black Right Front (+) Gray Right Front (-) Green Rear Speakers 4" Tail Gate Left Rear (+) White Left Rear (-) Red Right Rear (+) Yellow Right Rear (-) Blue

Posted on Jun 17, 2009

  • Rory Cohoon Jun 17, 2009

    http://www.tehnomagazin.com/Auto-radio-c... for the deck

    .

    1) Remove the ashtray and the two outermost screws exposed in the ashtray cavity.
    2) Remove two screws from each side of the dash console.
    3) Remove the climate control knobs.
    4) Unclip the trim bezel and remove.
    5) Remove four screws securing the car stereo to the dash.
    6) Pull car stereo from console releasing antenna and connectors.







    Constant 12V+
    Red

    Switched 12V+
    Orange/Yellow

    Ground
    Black

    Illumination
    Red/Green

    Dimmer
    Green/Red

    Antenna
    Driver's Pillar

    Front Speakers
    6 1/2" Doors

    Left Front (+)
    Orange

    Left Front (-)
    Black

    Right Front (+)
    Gray

    Right Front (-)
    Green

    Rear Speakers
    4" Tail Gate

    Left Rear (+)
    White

    Left Rear (-)
    Red

    Right Rear (+)
    Yellow

    Right Rear (-)
    Blue

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I bought a kenwood car stereo at the flea market and when i got home i found out that it has a lock code,is there any way to reset it without the remote control or shipping it to kenwood? it kdc mp628


you have a problem
one is able to set security code without the remote
without the security code ..not a chance to over ride it
a unit reset wont change the security code

check the user manual link
Kenwood KDC MP628 Manuals
options

back to the flea market see if the seller is there.. for a refund
or contact that flea markets organizers to track down the stall operators details

you can try and contact kenwood car stereo company direct
in your part of the world

this is USAs other countries have their sites
http://locator.kenwood.com/

if you have the gift or sweet talking
they may give you an authorized kenwood repairer to take the stereo to ...and get the code number for you

26310612-05xlcb20kmvnuzruvlterhkb-3-1.jpg

Oct 14, 2016 | Kenwood KDC-MP628 CD Player

1 Answer

Wiring diagram for alternator


ok , ill never say read the book again.
nobody wants to read. Ill not mention FSM books.
I like to teach how to fish not fish for you...
dig?

the alternators can very by engine size. so... ?
here is yours. im guessing engine.
4xE1

pin B is the very large, charge wire to batt. fuse box.
PIN IG IG1 is ignition switch
PIN L IS THE CHARGE LIGHT .


25767385-52so0pzh1nyxjy4j3lxu5fwe-1-0.jpg

Jul 01, 2015 | 1993 Geo Storm

1 Answer

I have a kenwood kdc-mp335 and when hooking it up i get no power to the head unit what could this be


is this a new install.
if yes, buy the adapter harness, all auto stores sell this.
makes connections easy and has ,"instructions"
the red wire to the new head is red, and most go to the correct
harness wire, for radio power, on the geo that is RADIO fuse.
that goes to ignition on , connection. so fuse must be hot.
and key on. and radio grounded (black) to play
your car is a toyota corolla in snake skins. (badged)

Jan 27, 2015 | 1991 Geo Prizm

2 Answers

How do I read trouble codes for 91 geo storm? Scanners are to new to read.


that is true.
but some cars running obd1 , can be scanned,. (i have one)
like all GM cars and even older, , some ford, , Honda's . Toyota;s
but this car is GEO, (underdog, but is really what. a Isusu.)
Isuzu's cars are mostly not raced or sold here now. so who's going to make scanner for such a rare car and engine and EFI?
there is no OBD1 standard, each company uses a unique design.
then,... so...
OBD2, in 1996 a USA invention is a standard and all tools work.
so....
what you have is the old blink codes. wink wink...
all OBD1 cars work like this (or very close)
you connect a jumper wire, and the CEL lamp flashes codes.
so is the CEL stuck on? running.
must come on key on, bad lamp or bad ECU.

you can check out Isuzu Impulse

Example storm post..OBD1991 (USA)
To put the ECM (Engine Control Module/Ignition Control Module/Engine Computer) into diagnostic mode, where it will flash codes at you using the "MIL" (Malfunction Indicator Light or "Check Engine" light), short pins 1 and 3 of the ALDL/OBD1 connector using a paperclip. When you then turn the key into the on position, the MIL should flash once, then pause a bit, then flash twice. That means code "12." If there are other codes, they will be flashed out as well. All codes are two digits.
end quote, on storm

but where is the connector DLC?
and which pin is 1 an 3
so. we google more, or look it up in alldata.com like most do.

or here
http://www.robietherobot.com/storm/stormFAQ.htm

that was the 1st google hit, using clear text human questions.
DLC jumper storm or Impulse.
or diagnostic jumper Impulse.

join a Geo storm or inpulse forum and ask for scan tools.
they will be custom tools. (or hacked, as i have done)

Sep 17, 2014 | 1991 Geo Storm

1 Answer

Need to unlock my kenwood kdc-mp628


You will need to visit an Authorized Dealer or service center for that product to get the unlock code reset. You can find a dealer listing on their website, or call them.

Dec 27, 2010 | Kenwood KDC-MP628 CD Player

1 Answer

All electrical dead.battery is good no electrical power anywhere,can't get veh out of park


sounds like your ignition switch has gone bad or the connection on your starter......had the same problem in a 91 geo storm a 2000 chevy pickup and the starter issue in my 72 chevelle....i know they aren't the same vehicle but other than checking all of the fuses the ignition switch will render your car useless as well

Dec 23, 2010 | 2004 Honda Accord

1 Answer

Color codes for kdc138


This is a link to Kenwood for your KDC138 instruction manual. Reference page 16 for wire color codes.
http://www.kenwoodusa.com/UserFiles/File/Global/Consumer/Manuals/kdcmp238.pdf
Yes, the KDC138 is included in this manual.

Nov 25, 2009 | Kenwood KDC-MP628 CD Player

Not finding what you are looking for?
Kenwood KDC-MP628 CD Player Logo

844 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4979 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

81285 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...