Setup file incorrect e:\scandall\sdata1\setup_en.msi

i think proofing.msi file is not in the microsoft office folder.

The quickest way is to see if it's located on your drive. Press the Windows key and s, type the Outlook.Mui.Msi in the search box and click search. If it finds it write down the location. You can right click the file and select open fine location to take you where it's located. What might be happing if office was installed via CD, if that is the case you will need a copy of that CD.

How to fix - Setup cannot find ProPlus.WW\ProPsWW2.cab

When you receive the error "Setup cannot find ProPlus.WW\ProPsWW2.cab" it might mean the MD5 checksum the install was expecting and the one on the actual file do not match. Here's how I fixed the issue.
First let me explain in simple terms what the MD5 is. MD5 is an algorithm that is used to verify data integrity. If anything in the file changes the MD5 will also change so it's a way for the program to check the integrity of the file.

The MD5 file is kept in the setup file of the proplus.ww folder. Open it with notepad and find the section that looks similar to the following **the numbers after "MD5 =" is what you need to be concerned with. Also remember that your numbers may differ. **


<LocalCache DownloadCode="{90140000-0011-0000-0000-0000000FF1CE}" SkuComponentDirectory="ProPlus.WW">
<File Id="Office64WW.xml" MD5="899A7D743D01852EBD036B465D1EF181" Size="4685" RelativeCachePath="Office64WW.xml" RelativeSourcePath="Office64WW.xml"/>
<File Id="Office64WW.msi" MD5="43B44C38BE513D9589ECAC7129DDC7C3" Size="3025408" RelativeCachePath="Office64WW.msi" RelativeSourcePath="Office64WW.msi"/>
<File Id="OWOW64WW.cab" MD5="E1E97F01F4292B89953204557A043C7D" Size="23865400" RelativeCachePath="OWOW64WW.cab" RelativeSourcePath="OWOW64WW.cab"/>
<File Id="ProPlusWW.xml" MD5="146CA2B8E1559F81E8DF6A3AED949E2A" Size="17252" RelativeCachePath="ProPlusWW.xml" RelativeSourcePath="ProPlusWW.xml"/>
<File Id="ProPlusWW.msi" MD5="F7DCCD578605F72AEEED775C9EB40AB8" Size="24809472" RelativeCachePath="ProPlusWW.msi" RelativeSourcePath="ProPlusWW.msi"/>
<File Id="ProPsWW.cab" MD5="3EA469E81A6064AE4BEFE4A9ACF36A9D" Size="149278843" RelativeCachePath="ProPsWW.cab" RelativeSourcePath="ProPsWW.cab"/>
<File Id="ProPsWW2.cab" MD5="86BEB0B6A2E76E95E580615185C06B04" Size="197934115" RelativeCachePath="ProPsWW2.cab" RelativeSourcePath="ProPsWW2.cab"/>
<File Id="setup.exe" MD5="4D92F518527353C0DB88A70FDDCFD390" Size="1100664" RelativeCachePath="setup.exe" RelativeSourcePath="..\setup.exe"/>
<File Id="osetup.dll" MD5="FCC38158C5D62A39E1BA79A29D532240" Size="5789544" RelativeCachePath="osetup.dll" RelativeSourcePath="osetup.dll"/>
<File Id="ose.exe" MD5="9D10F99A6712E28F8ACD5641E3A7EA6B" Size="149352" RelativeCachePath="ose.exe" RelativeSourcePath="ose.exe"/>
<File Id="pkeyconfig-office.xrm-ms" MD5="3DCFF1DCDEB1B837EC8F13351C8A92AC" Size="715834" RelativeCachePath="pkeyconfig-office.xrm-ms" RelativeSourcePath="pkeyconfig-office.xrm-ms"/>
<File Id="PidGenX.dll" MD5="7F120AAD20ECAE1EA421083F26611519" Size="1248016" RelativeCachePath="PidGenX.dll" RelativeSourcePath="PidGenX.dll"/>
<File Id="Setup.xml" MD5="" Size="" RelativeCachePath="Setup.xml" RelativeSourcePath="Setup.xml"/>
</LocalCache>
Next you will need to download and install an MD5 checker. I'll leave the process of how to use the MD5 to you to learn but it's pretty simple.

Next run the MD5 checker on the file/s that produce the errors during install. *there may be more than one*

Now there are 2 ways to work around this - If the MD5 on the checker did not match the MD5 in the file it probably means the file is corrupted so your best bet is to download the software again or get another disk.

Another less recommended way is to copy/paste the MD5 from the checker into the file (remember to make a backup of your setup file before) then save it and run the install again. This fools the installation process into verifying that your installation files are all OK.

Good luck!!

Insert your office enterprise 2007 cd and run a change or repair .

this should replace all missing files.

The MSI files are located at the following locations:

1. Browse the CD. Go to the Setup folder. Go to the DocProc folder. Double-click Docproc.msi to install.
2. Browse the CD. Go to the Setup folder. Go to Qfolder . Double-click Qfolder.msi to install.

1. If you do not have the software CD, download the HP Scanjet full feature software and driver from the HP Scanjet Full Feature Software and Driver web page. Click here to go to the "HP Scanjet Full Feature Software and Driver" web page

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15179&prodSeriesId=377689&prodNameId=377691&swEnvOID=2093&swLang=8&mode=2&taskId=135&swItem=sj-49436-1

1. After downloading the software, right-click the downloaded file, and extract the files to a new folder.
2. Go to the Setup folder. Go to the DocProc folder. Double-click Docproc.msi to install.
3. Go to the Setup folder. Go to Qfolder . Double-click Qfolder.msi to install.

Hope this help

Hi

To resolve this issue I request you to please go through below weblink...I resolved this issue with my setup and hope will help you as well.

You may receive a the message("... ") given in the weblink with a different msi file name(eg: scan.msi or camara.msi etc..), we need to note this file name and perform the below steps. In the below web link an example is been shown as 'Camera.msi' you may not receive the same message, note the file name in the error message you received and replace it with camara.msi and perform the rest troubleshooting from the below web link.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00709046&cc=us&lc=en&dlc=en

Hope this helps from my side..

Thanks

Roger

Hy there,
Here are some hints for you:
1, do a bios clear, there could be something setup incorrectly.
2, try to start setup with only 1 module of ram, no matter how small it is a 256mb is barly enough for windows setup.
3, Check your cooler if it perfoms correctly , on cooling amd is sensitive on overheating in the series of socket 462.
4, Check your hard drive for bad sectors or damages , yes a new one can contain some.
5, Replace your Optical drive.

If all thease are corect it could be a problem with the motherboard or the processor.

Good luck . :D

Ok 

sino gusto funny scandal is highly infective computer virus...that replicate its own files to each drives..and that say “tropen dis ganda nakakatawa”. Worse, my current status message even displayed this: “sino gusto funny ust scandal pm nio ko”.

U Should download the given web link file to remove  Funny UST scandal virus in your PC,

http://www.geocities.com/six519/Remover.zip

just
1-download the Funny UST Scandal Avi.Exe Remover zip.
2-Double click remover.exe and
3-click on the “patayin ang tangahing virus button”.

This will automatically eliminate the Funny UST scandal AVI virus from your PC.

Happy to help u

why do you want to use the older version, the new version has much better driver support and actually works with the event buttons on the scanner.

download "protector pro" this software erase all internet history etc etc. i already tried