Can I print out the maintenace manual for Cub Cadet Mower

Download the owners manual from Cub Cadet using model number 13A-244G100.

Customer Service Cub Cadet

Because I didn't know they used 2 belts in the diagram on parts tree.com . I bought the 79" belt and not the 78" belt.

In most cases the hydrostatic drives are not made by the company tractor or lawnmower.
This is in the owners manual.

Hydrostatic Transmission
The hydrostatic transmission is sealed at the factory
and is maintenance free. The fluid level cannot be
checked nor can the oil be changed. Always keep the
area around the transmission cooling fan free of grass
and debris at all times

Cub Cadet LT1024 Operator Manual

How to Change the Hydrostatic Fluid in Cub Cadet Lawn Mower

https://www.google.com/webhp?sourceid=chrome-instant&rlz=1C1GGGE_enUS385US385&ion=1&espv=2&ie=UTF-8#q=cub%20cadet%20hydrostatic%20fluid%20change

I hope that this can help. Tom

you need to change thr hydr fliud in the transmission and the filter

Check the pully alignments with a straight edge. Make sure the belt is tight.

remove the deck and give yourself some room to work

Cub Cadet has five models in their new Series 1000 lawn tractors, all powered by Kohler engines. Cub Cadet models -- as several other lawn equipment brands -- are manufactured by MTD Products.

The Cub Cadet LT 1045 has a 20-hp Kohler single-cylinder engine, with an aluminum block and cast-iron sleeve for longer life. It has a full-pressure lubrication system with spin-on oil filter for easier maintenance. This engine is not as powerful or as long lasting as the Kohler V-Twin OHV, which is available in other models in the line, but the LT 1045's engine is still solid enough to provide years of mowing.

The hydrostatic (automatic) transmission is a good match with the engine and provides sufficient grip to cut grass on moderate inclines. Power is transferred from the engine to the transmission by a heavy-duty Kevlar belt rather than a more expensive shaft drive. A Kevlar belt also drives the three cutting blades.

The mowing deck cuts a swath of grass 46 inches wide at one pass, and is removable for service and cleaning. Four anti-scalping wheels help keep the deck from scalping grass on uneven ground. The cutting height is manually adjusted from 1-1/2 to 4 inches. The turning radius is 18 inches, which standard for lawn tractors. This model is intended for use on 1- to 2-acre lawns without many turns or small obstacles.

if you go to cub cadet.com click on info center tab then owners manual put model and serial number in it will show you a diagram

hi there

pauly46 here

cub cadet 1000 series

i can only suppose its a LT 1018 up ward

here is web site for that model
http://www.partstree.com/parts/?lc=cub_cadet&mn=LT1018+Tractor&dn=0125100003

or you can go to here and choose from this web site area list

http://www.partstree.com/parts/?lc=cub_cadet&mh=12

choose your model from list , then go to drive system

view belt diagram ,


you could save a copy or print them straight off web page

cheers hope it helps

pauly46

Go to... www.partstree.com Click on Cub Cadet, then enter the model number. All the diagrams are there.