Question about Samsung S630 Digital Camera

1 Answer

Cannot connect to PC

PC does not recognize samsung S630 when connected. I have reloaded drivers with no change and tried a new USB cable. Other devices work on these ports as well.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Samsung Master
  • 102,366 Answers

Try NOT connecting your camera to your computer.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

Posted on Jan 30, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 641 Answers

SOURCE: samsung s630 drivers/vista

As far as I know, you don't have it in the Samsung web site. Contact Samsung and ask them were could you get the drivers for your camera. Enclosed you have the link for it http://www.samsungcamerausa.com/support/contactus.asp Good luck and let us know with your results.

Posted on Aug 19, 2007

IFIXALL
  • 868 Answers

SOURCE: Cannot download from samsung s630

Down load a software program that will bring the computer to recognize the camera.Or...go to control panel and click the scanners & cameras icon.Now look to the left side of screen and open select imaging device.Follow the prompts from there. Please Rate this ! Thanx!!!!!

Posted on Jun 07, 2008

SOURCE: samsung digital camera cable

Along the side of my "USB" cable it reads........

E174089 (UL) CM 75C 28AWG/2C+28AWG/2C SHIELDED USB V2.O LONGWELL-P
I
I
\I/


(The 75C above actually looked like it read seventy five DEGREES celcius)

But there was no "DEGREES" symbol on my keyboard and i din not want you to think
that i typed the letter O or the number zero.

Posted on Sep 21, 2008

secretgeek50
  • 57 Answers

SOURCE: windows doesn's recognize camera, device manager says no driver

Hi -

Have you tried another USB port? Sometimes, they can act goofy.
Also be sure your anti-virus isn't blocking any part of the installation.

Here is a link to the Samsung troubleshooting guide for your camera.
You can probably download the most recent driver from that website as well.
Perhaps they have a better or newer version than what came prepackaged
with the camera (just because a camera is a new purchase does not mean
the software it came with is the most updated).
http://tinyurl.com/5zsvwd

I run WinXP home edition, so I am not familiar if there are any differences in the professional version regarding software installation....

Good luck!

Posted on Dec 17, 2008

Ticodude
  • 53 Answers

SOURCE: samsung s630

First, I need to ask the dumb questions:
1. Are both computers running XP?
2. When you connect the camera, do you turn the camera on?
3. Do other USB devices work when connected to the same
USB PORTS you are using to connect the camera?

Ok, since the camera is not recognized at all on both computers, we can pretty much disregard USB PORT failure, but just in case, try different USB PORTS on both, please.

Most if not all cameras should be recognized as mass storage devices just by connecting them to USB PORT on computer, and should be visible as a new drive in MY COMPUTER icon.

Maybe your bundled USB CABLE is not working, or this is one camera that insists on using the bunbled software package that came with the camera.

Last thing to try is to buy a multi-card reader/writer and put the memory card in there. That has to work!

Hope that helps.

Posted on Dec 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Downloaded drivers for a new Samsung M2830DW and will not print. Computer does not recognize printer. Help???


Dear
Some times the front usb port arnot work. try to connect the /replace the usb cable to the usb port mounted on motherboard(back side panel of pc), It also may happen the usb port may disabled due to virus. Also you can unistall the driver during power OFF of the printer after uninstall successful power ON the printer, it will show NEW HARDWARE FOUND at the right right bottom of the pc screen ,If you OS is win 7 and connected to internet the driver automatically installed, otherwise you can load the driver cd and install the driver.

Also it can be checked at control panel-add hardware.

Thanks.

Feb 26, 2015 | Samsung Office Equipment & Supplies

1 Answer

Hi, I have a Samsung s630 camera and connected it to my pc with the usb cable.. I have tried downlaoding the software but still nothing happens. How do I get the pictures off? K


Buy an SD card and go to settings and transfer all the pictures from internal memory to the SD card.... then you will be able to get them off.... Hope this helps :)

If there is something wrong with the driver, then you can go to the Samsung website and they might have a driver for you camera :) Write back to inform me if this worked :)

Jan 10, 2011 | Samsung S630 Digital Camera

1 Answer

USB device not recognized by Samsung Omnia


Your best bet is to soft reset the device, uninstall ALL samsung software off you pc including drivers. then ensure the phone is in ActiveSync mode and then install all software from the disc or samsung.com site and then connect the phone.

May 31, 2009 | Samsung SGH-i900 Omnia Unlocked Cellular...

1 Answer

Samsung s630


First, I need to ask the dumb questions:
1. Are both computers running XP?
2. When you connect the camera, do you turn the camera on?
3. Do other USB devices work when connected to the same
USB PORTS you are using to connect the camera?

Ok, since the camera is not recognized at all on both computers, we can pretty much disregard USB PORT failure, but just in case, try different USB PORTS on both, please.

Most if not all cameras should be recognized as mass storage devices just by connecting them to USB PORT on computer, and should be visible as a new drive in MY COMPUTER icon.

Maybe your bundled USB CABLE is not working, or this is one camera that insists on using the bunbled software package that came with the camera.

Last thing to try is to buy a multi-card reader/writer and put the memory card in there. That has to work!

Hope that helps.

Dec 30, 2008 | Samsung Digimax S630 Digital Camera

1 Answer

Usb not recognized


you can try this. install pc studio, and then connect your mobile...it should automatically install the drivers..but if that is what you have done then you can try updating the PC studio software.

Nov 29, 2008 | Samsung SGH-D900 Cellular Phone

2 Answers

Can't connect to computer


Try NOT connecting your camera to your computer.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use iPhoto or any other photo cataloging program.

Mar 24, 2008 | Samsung Digimax S630 Digital Camera

1 Answer

I cant put pictures onto computer?


you have several options.
1. see first what operating system you computer runs.
if it is vista or mac, it will be recognized as unknown device,
look for SSCAM100 or DCIM folder. you will then see the camera files in that folder.

2. you should also download the cd driver, the cd that comes with the camera, to your PC. this will help the connection be proper.

3. if you're using desktop, try to connect the camera at the back of your tower. look for a USB port at the back of the tower and connect USB cord to it.

4. make sure you're using the proper USB cable, the cable that comes with the camera. for your S630, it is USB cable type 2.

5. also, make sure before you connect camera to PC, camera is turned off, when the USB cord is properly connected, that is the time camera should be turned on.

6. when unpluggin the camera to PC, make sure that you are safely removing the device from the PC so you will not have future connection problems.

hope my suggestions work for you.

Jan 06, 2008 | Samsung Digimax S630 Digital Camera

1 Answer

Samsung s630


Hi there,

If you're a MAC user, you could still download pictures from your camera to PC.

No need for you to install any CD software because your camera will be recognized automatically as a removable disk.

Just try to make sure that you'll be using the USB cable supplied in the package and your PC does have good working USB ports.

For transferring pictures with OS (MAC):
- Turn off camera
- Plug USB cable to camera and PC
- Turn on camera
- Connect to computer or printer will come out on camera screen
- Select the desired one
- Press MENU/OK
- "New Hardware Found" will be seen on the right lower corner
- A window will pop out with various options
- Example: "Open to View Files", "Copt to a folder"...

* If nothing like those mentioned above happened,

Double check through Computer Devices with Removable storage:
- Look for DCIM folder in any of the Removable storage
- Select 100sscam folder inside DCIM folder
- Upon opening, all pictures will be viewed

Make sure to check your MAC System for the following:
- Power Mac G3 or later
- Mac OS 9.2~10.3
- Minimum 64MB RAM
- 110MB of available hard-disk space

Jan 05, 2008 | Samsung Digimax S630 Digital Camera

2 Answers

What's up with my camera


You will probably have to go into "My Computer" and find your camera in the "Devices with Removable Storage". It should be there, otherwise, try plugging it into a different USB jack on your computer, if you have one.

Dec 06, 2007 | Samsung Digimax S630 Digital Camera

Not finding what you are looking for?
Samsung S630 Digital Camera Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Cameras Experts

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

5188 Answers

Kazim ERGUNEY
Kazim ERGUNEY

Level 3 Expert

577 Answers

Are you a Samsung Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...