Question about Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

2 Answers

My canon 400d, suddenly stopped working, it does not start and no power at all. pls help

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 164 Answers

Such symptom indicate a malfunction on the DC/DC voltage converter circuitry, and the camera has two of them located in different boards.

In order to perform a correct diagnostics and repair of it, it is necessary to open such camera and perform it by a qualified camera repair technician.

If it's under warranty, I do recommend you to send it back to make valid the warranty.

If not, then you hav the options of pay for its repair, or do it yourself if you are willing tgo open it and perform some basic diagnostics of the failure. You will needtools to do it, which includes the usage of a soldering iron.

Best regards,

Posted on Jul 23, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

ANy instructions?

Posted on Feb 20, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon 400d not starting


While there may be a number of causes of no power, the usual one is that the bottom right screw that holds on the back circuit board has come out and has shorted out a section of the circuit. Usually it blows the 'P' fuse on the front board, but depending upon were the screw ends up it could blow the flash and drive boards or damage a section of the rear main board.

Also check to make sure you do not have bent CF pins - if the center power pins are bent and touch other pins they might blow the circuit. Usually this blows the 'K' fuse under the lower right shield plate on the rear circuit.

Feb 21, 2013 | Canon EOS 400D / Rebel XTi Digital Camera

1 Answer

The display of my EOS 400D canon is broken , and need replacement. Where can i order the spare part?


hi, if still looking for LCD Display replacement for your digital camera, pls don't hesitate to contact us, we are a big supplier for digital camera/camcorder spare parts in China http://szaideal.diytrade.com/

Jan 24, 2010 | Canon EOS 400D / Rebel XTi Digital Camera

2 Answers

My Canon EOS 400D won't switch on. No power.


Have you tried cleaning the battery contacts in the camera with a cotton swab lightly dampened with rubbing alcohol? Are the batteries also 3 years old?

Dec 07, 2009 | Canon EOS 400D / Rebel XTi Digital Camera

1 Answer

Need Help, the auto focus of my canon 400D won't work.(I can still shot with manual focus)


Try cleaning the contacts on the camera body and the lens where they meet with a cotton swab lightly dampened with rubbing alcohol.

Oct 14, 2009 | Canon EOS 400D / Rebel XTi Digital Camera...

1 Answer

Canon eos 350d wont power up


Have you tried his battery pack in your camera??? if it still does not work your camera probably blew a fuse and repair cost run about 180.00 to repair it. If you need any further help please fell free to ask.

Apr 22, 2009 | Canon Rebel XT / EOS 350D Digital Camera

2 Answers

F stop


Sounds like your camera and your lens aren't communicating. Have you tried cleaning the contacts on the camera and the lens mount?

Sep 27, 2008 | Canon EOS 400D / Rebel XTi Digital Camera

1 Answer

Error99... pls help!!


here is a link for further steps to take on Error 99: Canon info

The article refers to the 30D, but the same troubleshooting will work for your camera too

Feb 17, 2008 | Canon EOS 400D / Rebel XTi Digital Camera

3 Answers

Canon 400D


Use a card writer and copy your pictures to the CF card on the computer.

Jan 07, 2008 | Canon EOS 400D / Rebel XTi Digital Camera...

Not finding what you are looking for?
Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens Logo

471 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

TC CAMERA REPAIR.Com...

Level 2 Expert

176 Answers

old marine
old marine

Level 3 Expert

2178 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...