Staic coming from speakers of pdp-5030hd

it comes with 2 26 watt speakers and digital surround sound :)

The tv power supply board is the problems and the causes,it dead.That the board,where the power a/c cord plug into it.Try website like Ebay.com to buy whole refurbish power supply board for the replacement.

send in your pdp-r03u for rebuild at valley service emai : [email protected] or Ebay.com for more information valleysercucrs

You have may be broke the system cable, the dvi-d cable is broke...
In my pdp-5030hd have the same problem, probe changing the only the dvi cable and works perfect...
The monitor blinks 3 red and the 4 blinks still in red...
Now i will try to put in the dvi-d input another source like a pc...
You need always the Pdp03u box for control...

make sure you have a nice clean cable signal. if it's fuzzy that may be causing the static. also, if you have a cable box, check the audio settings for it.

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.

Pioneer plasma pdp R03U shuts off and tv shows E01 or action freezes while soun dgoes on and then stops E01

click link -ebay shop selling power supply boards for 503hde/pe at 180 pounds you will have to contact him has he does not list them as pioneer are only ment to replace these boards or shops under contract with pioneer i changed mine and only takes min's when you have got the back cover off...

http://stores.ebay.co.uk/Plasma-Parts-UK

hope this helps mark doran

Hi, my PDP 50XE just cut out, when powered back on the screen powers down and the standby light flashes twice followed by a 5 sec gap.  Anyone got any thoughts? Thanks

Hi,

The power supply board for this model can be found in the link below.

Buy PDP-5030HD Power Supply Board