Question about Flat Panel Televisions

Open Question

Dvd-tv hookup samsung ln-t3242 tv +samsung dvd-yr357 dvd.cable box to tv-HDMIcable box to dvd- 3 cable compomentdvd to tv-HDMIproblem is that when switch to HDMI2 on tv (dvd) I get sound and picture but lose picture after about 15 sec making it impossible to record tv programs.Replaced cable box and did it with older dvd.Thank You inadvance,Phil

Posted by on

6 Suggested Answers

  • 1 Answer

SOURCE: lcd tv no picture

I took mine back and they replaced it! Problem solved!

Posted on Jan 12, 2008

SOURCE: controlling a Motorola DCT6416 III with a Samsung LN-T4661F remote

I have the same problem

Posted on Jan 25, 2008

SOURCE: Codes to operate a cable box with TV remote

Try code 038. If that doesn't work try 039.

Posted on Sep 08, 2008

  • 36 Answers

SOURCE: Samsung power-up problem

two 2200uF capacitor, two 1000uF capacitors on powersupply board.
Replace it! you will save $300.

Posted on Aug 05, 2009

  • 4090 Answers

SOURCE: Samsung ln t4665f : Power Light On , No Picture : Clicking Sound

there is a soloenoid type switch that fires the TV up this has failoed. its like a neon or fluoresecent tube that has a faulty starter switch light tries and tries but never quite makes it when it does get going it has that purple smear in the tube. that is the simple explanation for your problem. part is about $60 labor is unkinown as i am not in USA but looking at some of the rip off charges I am glad i dont have the bill

Posted on Aug 20, 2009

  • 1 Answer

SOURCE: Sometimes Loses Sound

disconnect the hdmi cable from both ends it resets the sound signal!!!

Posted on May 10, 2010

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

How do u connect up surround sound to my samsung tv

Connect the surround sound to cable box or use a optical wire

Jul 27, 2012 | Samsung LN-R3228W 32 in. HD-Ready LCD...

1 Answer

I get no picture when I connect the set box HDMI cable to the TV

The default connection is usually HDMI 1. The possibility of the cable being defective, or the box sending a signal out need to be determined.

Set up your connections, then turn on your TV.

Try using different HDMI hookups.

Bring a different video source to get the TV to display.

See if you can bring up the TV menu to select an input to connect to.

Oct 12, 2010 | Samsung LN-T4665F 46 in. LCD Television

1 Answer

Wiring diagram,connecting DVD & VCR to a television


Need to select proper input on the TV when playing DVDs. For VCR, select channel 3 or 4.

For cable TV or satellite TV , change channels on the proprietary box and record channel 3 or 4 on VCR. You can also hookup RCA cables (3) from cable box etc. to VCR. Select LINE input on VCR if connecting RCA cables.

Aug 23, 2010 | Flat Panel Televisions

1 Answer

I have a Samsung 46''B6000 tv hooked up to a samsung Blu ray player B-1590 via HDMI cable. During the course of watching a BR disc, the volume had to be increased all the way up to 100 (max), to be able to...

This happens on our samsung too with some dvd's.
It is not the tv's fault (in my case) but have to turn the volume button on the dvd remote up full first then adjust from the tv remote as required.

Oct 19, 2009 | Samsung LN-S4692D 46 in. LCD HDTV

1 Answer

Hi! I was watching my TV - Samsung LN-S4092D - and the picture went to black with a few very light horizontal lines for about 30secs. After that it went to complete black. I thought it might just be that...

Hi Bob. The first Board to cause this problen is the Main bd. The next bd to cause this is the T-Con bd which is mounted on the Panel. Since you saw horizontal lines and that you have text on the screen and are missing audio from the tv means that the Main bd has gone bad. Have a trained Samsung tech service your tv. Call 1-8020-Samsung as they can direct you to a Qualified tech in your area.

Jul 05, 2009 | Samsung LN-S4692D 46 in. LCD HDTV

1 Answer

Lcd tv hookup

Ive got 3 samsung tv's (lcd, plasma, DLP) and I use HDMI cables on all of them. Its the only way to get the full potential out of the tv. When you use the red/white/yellow RCA cables the signal is anolog aka "old technology". Component cables are good but HDMI is the best. HDMI is a digital signal and thats what all the components that go with the tv should be run on. If your dvd player does not have an HDMI output I would suggest getting one that has that output. As for the cable box most require you to upgrade to digital cable in order to get one with an HDMI output. If you dont want to spend the money on new components and run what you have now the picture will stay mediocre at best. Good luck hope this helped

Mar 07, 2009 | Samsung LN32A330 32 in. LCD TV

1 Answer

Connecting my DVD player to my widescreen TV


Dec 15, 2008 | Samsung LN-S4692D 46 in. LCD HDTV

2 Answers

Connecting a samsung dvd-vr to TV with cable & rf modulator

my coaxial cable hook up is broken from the plasma. Can i fix it?

Jun 15, 2008 | Samsung LN-R328W 32 in. HD-Ready LCD...

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

66505 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides