Question about Baby Trend Expedition LE Jogger

1 Answer

Was given to me without the manual. Can't attach infant seat to stroller. Not sure how to do it.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

The manual on how to do this can be found at www.babytrend.com.

To attach the Baby Trend Infant Car Seat, recline
the seat all the way back.
• Position the Infant Car Seat, facing toward the
rear of the jogger, so that the seat shell goes
into the Child Tray and latches into place.
(Fig. 13a) Check that the Infant Car Seat
is firmly locked onto the Child Tray before
using.
• Check that the front Child Tray is firmly
attached to the jogger's armrests. Make sure
that the car seat locks into the front Child Tray.
Then turn tabs on stroller frame to lock the
front of the car seat into the stroller. (Fig. 13b)
• To remove the Infant Car Seat, squeeze the
release handle located at the foot-end of the
seat and carefully lift upward on the seat.

Hopefully that helps!

Posted on Jul 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need used chicco infant seat adapter for 2010 bob stroller


Check out ebay or amazon you can get almost anything you need between these two sites

Mar 24, 2013 | Chicco BOB Infant Car Seat Adapter - for...

Tip

Pram or Stroller


Strollers with detachable infant car-seat carriers extremely practical. In the first couple of months, your baby can sit securely in the infant carrier while you go for a walk. As an added benefit, you can transfer your baby from the stroller to the car without having to disturb her, as you would with a pram. For older infants and even toddlers, you can use the stroller without the carrier. Most have seats where the back adjusts from nearly a full upright position to a full recline.

 

http://www.drspock.com/faq/0,1511,942,00.html

on Oct 07, 2007 | Evenflo CitiTour Double-Tattersall...

1 Answer

1. How do I open and fold the DuoGlider stroller? 2. How do I attach an infant car seat?


The steering handle has a red switch on it. Pull the switch to the right and then twist the handle grip forward. The stroller should start to collapse.

Infant seats sit rear facing. You'll have to recline the stroller seat. Then the clip on the infant seat will grab the food tray and lock it in. Your stroller might have come with an additional strap to secure the seat once you have it locked.

Dec 18, 2010 | Graco DuoGlider 7924 Twin Seat Stroller

3 Answers

I have a used Fisher Price infant-to-toddler stroller but no instruction manual. The stroller is currently in the open, fully reclining position, and I would like to know how to adjust it to the upright...


There is a latch on the top back of the seat that you pull up on to adjust the recline of the seat. But I would still like a manual if anybody has it!

May 12, 2010 | Dreamer Design Fisher Price...

1 Answer

Infant seat attaching


You can go to the evenflo website and look up replacement parts and enter the model number and such and you can download the manual and/or also can have them send them to you.!!

Jun 17, 2009 | Evenflo Take Me Too - Express Twin Seat...

1 Answer

How to attach graco car seat safely to the duoglider


Yes. You will need to make sure you have one of the two tray tables that attach to the seats. Without this, you cannot use the Graco infant seat.

If you have the tray table, ensure it is attached firmly and properly to the stroller frame. Attach the Graco infant carseat facing the rear until you hear that it snaps in. This process is similar to snapping the carseat into the base that is in your car.

Jun 14, 2009 | Graco DuoGlider 7924 Twin Seat Stroller

2 Answers

New car seat, quinny freestyle


what you need is a maxi cosy infant seat. these are the ones designed to fit quinny freestyle frames. you will also need attachment bars that you can easily buy on ebay for a coulpe of pound.
hope this helps

Mar 10, 2009 | Quinny Freestyle 4 Marina Stroller

1 Answer

Peg perego venezia stroller with infant car seat


you should be able to turn them how you want then lower the lver the way you want them to lock hop it helps

Oct 31, 2008 | Peg Perego Venezia Single MT Blu Moon...

2 Answers

Installation of Car Seat base


Try this link it seems very good http://www.aap.org/family/carseatguide.htm

May 13, 2007 | Cosco Travel Systems 01-938 Stroller

Not finding what you are looking for?
Baby Trend Expedition LE Jogger Logo

1,372 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baby Trend Baby Gear Experts

Jennifer Rock
Jennifer Rock

Level 2 Expert

135 Answers

Scott Jelt
Scott Jelt

Level 2 Expert

44 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Baby Trend Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...