Question about Digi-Tech DOD-Digitech 231 - 31 Band Per Side Equalizer Home Equalizer

1 Answer

If i am foing to do home recording do i need ............

.if i am going to do home recording do i need a power amplifer and a mixer?????????

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,996 Answers

Not necessarily. You have a built in mixer in your computer, and depending on the source of the input you may not need amplification to record. Playback is another issue, entirely.
There are excellent utilities and hardware for computer recording available, some such as sound cards for purchase and some freeware or shareware (like Audacity). Just google "computer recording" and you'll find links to a lot of helpful information to get you started. If you have xp or vista, you have a built-in sound recorder. But it will depend on your system and the quality you expect to turn out as an end product.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Posted on Jun 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I connect a mixer to my pioneer receiver


mixer audio leads go in to receiver (you could use the aux in on receiver),then switch receiver to AUX on the front.

you need receiver to recognize the mixer....

Jul 24, 2016 | Pioneer Audio Players & Recorders

1 Answer

I have a Kenwood KR V6090 tuner amp. Can anyone please tell me if I need a record deck with or without a pre amp fitted.


Hi. Some amplifiers provide power for a record deck (or you mean a vinyl record player). Some vinyl record player have their one amplification system, some don't. Those with the amplification system work fine on older amplifiers but others require a back-up power, like a transformer to provide power for the record player. You need to enquire with the store person on the type of record deck or record player you can use directly with the V6090. I had an early Pioneer Amplifier and a matching record player so that I could play the vinyl disc and LP's on full volume. Later I switched to digital Pioneer 7 channel. This couldn't accept the record player because it did not have a power substitute like the older Pioneer. So, when the record player plays, no signal is being sent to the amplifier and therefore, no music is heard, except from the needle.

Dec 12, 2014 | Kenwood Audio Players & Recorders

1 Answer

How to hook up to home amp


If home amp has a phono input and you have no turntable, plug the output of the MP3 player into the phono input and begin with the volume turned all the way down. If you do not have a phono input, you can plug something like a DJ mixer in to get that extra level of amplification you want for comfortable listening. If you do that, the MP3 player would plug into the turntable input and the mixer output would go to the available line level input of the home amp.

The CD player has either the coaxial connector, which is not common for home amps, and a pair of "RCA" jacks (right and left) which are.
The CD output can be connected to any avaialble line level input, such as anunused "Aux", "Tape In" "MD/VCR audio in, etc.

Dec 16, 2012 | Stanton C314 Tabletop CD and Mp3 Player

1 Answer

Marshal mg15fx : Noise when i connect the amp to a mixer.


Mixer uses balanced outputs, this unit does not... Also ground loops can be a problem. Make sure this and the mixer are BOTH powered from the same receptacle. The next problem is that the level of the mixer is MUCH too high for an amp designed to recieve guitar signals if you are sending a mixer into this. It is NOT clear how you are connecting this to a mixer... IF you happen to be trying to send signals from this to a mixer, either use a mic OR use a Direct Input box. You should tell us exactly how you are connecting this to the mixer since there are MANY ways, and most do not make sense.

Aug 07, 2011 | Marshall Amplification Marshall MG15FX...

1 Answer

Where can i obtain a realistic 32-1200 manual for free? or what does cera and mag on the back of the mixer mean?


In reference to the question -
" what does cera and mag on the back of the mixer mean? "
these jacks are for the input of phonograph record cartridge signals.
Phonograph cartridges are of two types -
1. "Cera"mic (ceramic) cartridges generate their signal using a ceramic crystal which provides almost 1/2 a volt of current.
2. "Mag"netic (magnetic) cartridges generate a more accurate signal than a ceramic cartridge but the magnetic cartridge generates its signal using a moving-magnet mechanism (rather than a ceramic crystal) and the magnetic cartridge generates much less current than a ceramic cartridge, so its signal needs a lot more amplification than a ceramic crystal's output. So the two jacks on the back of the mixer provide different levels of amplification for the phono cartridges, less amplification for a ceramic cartridge and more amplification for a magnetic cartridge.
Since few people play phonograph records any more it is understandable that the public has little knowledge of the differences between ceramic and magnetic cartridges. But each have their own benefits and usually ceramic cartridges are cheaper than magnetic cartridges simply because it takes a lot more sophisticated manufacturing technology to make a magnetic cartridge, though magnetics are usually preferred over ceramics because of their more accurate generation of a signal from the wiggling groove in a phonograph record. But for those who can hear, the complete sound signal from a phonograph record is much preferred over the dead and dry sampled sound from a digital CD. And the old 1/4" reel-to-reel tape recordings are the highest sound quality of all because they are direct copies of the original magnetic tape masters with no digitizing at all. The fullness of their sound is astounding compared to any digitized signal..
A mag input is down at the mic level.
A ceramic input is almost up at the line level.

Jul 25, 2011 | Audio Players & Recorders

1 Answer

How do I attach power amp to 1832 mixer


There are a number of configurations for a mixer like the 1832, the most common are PA system and Recording system. There are Main output jacks which carry the mix as summed in the main faders. These in a PA system would feed the pa amplifiers which drive the house speaker system for the audience. These connectors are XLR 3 pin type on the rear, intended for professional pa amplifiers which use balanced +4dbv line input level. Amplifier which have 3 pin XLR connectors for input signals can accept that high level signal. For home style HiFi amplifiers, the signal level is nominally -10DBv and balanced or unbalanced signal lines with 1/4in diameter phone plugs which are connected to the mixer by way of a second set of Main output connectors which are 1/4in phone jacks. Use whichever amplifier input level your amp has.
If you are not using it as a main PA house mixer, but using it for recording, the main output connectors go to a 2 channel recorder or computer sound card recorder. The power amp and your monitor speakers are connected to the connectors labeled "Control Room" (CTRL Rm). These output are useful for recording because the signal through the mixer can be monitored from several buses, Solo, main mix, selected by buttons provided. The buttons only affect the signal heard through the control room monitors, and not the main output which only sees the main mix so selecting "solo" does not interrupt the signal going to the recorder while the engineer in the control can be checking other signal paths through the board.

Jan 21, 2011 | Behringer Xenyx 1832fx Mixer 18 Input 32...

1 Answer

Sound is very low even at full volume


Thge problem can be the power amplifers thast drive the speakers are bad, if that is the case, you will need to replace the main board which will be real expensive, otherwise you can use the audio line out feeding a set of a PC powered spekers instead of paying hundreds fo dollars to have the sound problem repaired.
Parts:
http://www.shopjimmy.com/catalogsearch/result/?q=Vizio+VW42LF+

If I were you, I will go with powered PC speakers.

http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

Jun 12, 2010 | Vizio VW42LF 42 in. LCD HDTV

1 Answer

THE REACORDER IS NOT WORKING ON MY SPEACKER


first, all the recorders dont have amplification!!
this means if u connect a speaker to a recorder:
1: the recorder dont have out for the speaker
2: if u fix the cable to connect the recorder t a speaker, the speaker wont sound, couse the power out of and RCA out is too low.

so if u want to use a recorder, u need an amplifier to do this.

Jan 12, 2009 | Audio Players & Recorders

1 Answer

Feedback noise from mixer


Your mixer is already grounded, and does not need any additional grounding. It is grounded through the Power Cord.

Now, the feedback might be coming from one of the units you have connected to the mixer. The issue could also be the cable you are connecting to your recorder. Are you recording to a computer, or to some other external recorder (CDR / DVR / MDR, etc?) - try a different cable. Also try the different outputs on the mixer - you have 2 balanced line outputs you can record directly from. Don't use the RECORD OUT line, it's an unbalanced line, and if you want a good quality signal to record, your best bet is to use the XLR outputs. However, that might be connected to your amp or something.

What do you have going to the unit? Disconnect everything, and try by connecting each item 1 by 1, to eliminate where this feedback is coming from. Also, check for any ground loops that you might have, if you have a lot of equipment hooked up in your set up. (Educate yourself on Ground Loops)

If all else fails, get yourself a HUM ELIMINATOR.

- OPTiC
DJ Equipment Repair & Service
A DJ Pro Audio Co.


Nov 12, 2008 | Pioneer DJM-600 Silver Professional DJ...

2 Answers

Home stereo audio problems


Could be a bad patch cord, a setting on the mixer, a faulty mixer (unless it works ok with other amps), or a dirty control on the Sony amp if it has analog controls. Have you tried connecting other sources to the Sony?

Sep 27, 2008 | Audio Players & Recorders

Not finding what you are looking for?

Open Questions:

Audio Players & Recorders Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Digi-Tech Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5113 Answers

The Knight
The Knight

Level 3 Expert

74198 Answers

Are you a Digi-Tech Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...