Question about RCA 7" Digital Portable Atsc/dvd Tv Combo Dpdm70r
This is not on all channels, just some.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I don't have a code book for you, but I can tell you how to program the RCR660 using the automatic programming feature.
Programming RCA model RCR660 (no code search button)
While following these instructions, keep the following in mind:
device = the component you wish to control with your remote (TV, DVD, VCR, etc.)
DEVICE = the button labeled for the component you wish to program
1. Turn on the device you wish to program.
2. Turn off all other devices in the general vicinity.
2. Press and hold DEVICE
3. While holding DEVICE down, press ON/OFF and hold them both down until the LED turns on for that device.
4. Release both buttons.
5. Point the remote at the device, press and release PLAY and wait 5 seconds or until the LED stops flashing.
6. If the device does not turn off, then continue to press PLAY and wait the required interval (for a maximum of 20 times) until the device turns off.
7. When the device turns off, press REVERSE, wait two seconds and continue doing this until the device turns back on.
8. To finish programming, press and hold STOP until the LED turns off.
Posted on Dec 31, 2007
my universal unit won't change the tv channels, everything else works except the channel changing. Does anyone have a solution., The company is only open during the week.
Posted on Apr 05, 2008
after you press the code search button you have to press the dvd button then enter the code
is the remote the rca systrem link?
Posted on Feb 02, 2009
SOURCE: i have a rca dvd recorder+vcr combo drc8320n i want to set up watching/changing cabletv channels on the dvd remote. i have tried buying universal remotes cheap& expensive but they no longer work on my
With cable input connected to "RF in"on rear of unit make sure vidoe input is set to "Tuner". This will show up on the TV screen. Change channels numerically or using up/down arrow keys on DVR remote. Note there is a slight pause between changing channels.You probably will have to "autoscan" for channel setup/etc. If you say your TV set is old; it probabaly is equiped with coax
connection only/set TV channel to "3" or "4". when yot opt to play vcr/dvd it will override your
cable channel selected. Hope this helps!
Posted on May 09, 2009
Tips for a great answer:
Jul 26, 2016 | Orei DVD-Z1H Region Free DVD Player -...
Oct 25, 2014 | RCA DPDM70R 7-Inch Digital TV with DVD...
Register and download the manual for free at retrevo.com
Apr 02, 2011 | RCA RTD209 System
Aug 04, 2009 | Bose Lifestyle 28 System
Jun 10, 2009 | Sony Playstation 3 (PS3) Console
Jan 24, 2009 | LG LHT734 System
Sep 23, 2008 | Supersonic Progressive Scan DVD Player
Jan 10, 2008 | Sony DAV-FC8 System
25 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: