Question about Singer 7444 Mechanical Sewing Machine

Open Question

My singer 7442 won't turn on

It sounded like a bulb blew can u tell me what just happened

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 12 Answers

SOURCE: Needle position jammed?

First make sure you are using a needle that is recommended by your model. Secondly make sure the needle is inserted correctly. The flat side of the needle needs to be against the flat bar that makes the needle go up and down. After this, unplug the power supply and let it set for a couple of minutes. This gives the computer time to re-set itself.
Hope these suggestions work!
Zelma

Posted on Jan 19, 2008

Ad
  • 3 Answers

SOURCE: Singer 7442 How to get inside ?

http://www.scribd.com/doc/3713782/Singer-7442-Sewing-Machine-Manual heres your manual, good luck!

Posted on May 13, 2009

  • 139 Answers

SOURCE: Singer 7442 is Loud!

Check to see that lint or oil has not collected on the hook or needle bar. Always use a good quality sewing machine oil. A damaged needle can also be the cause of a noisy machine - insert a new needle.

Posted on Apr 07, 2010

  • 1 Answer

SOURCE: cannot get bobbin winder to work

I am having the same problem - I've had my machine for 3 years and used it a lot. I'd love to hear if you get any solutions.

Posted on Jul 07, 2010

  • 458 Answers

SOURCE: singer model 7442 needle hits plastic piece under

Perhaps you have bent the needle. Or perhaps you have shifted the bobbin somewhat while removing jammed fabric.

Posted on Dec 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Singer 7442 won't stitch at all. It picks up the bobbin thread nicely, but after that won't stitch at all. Any suggestions?


Sound like one or the other of the threads is stuck. Completely un- thread your machine and remove the bobbin. See if the needle moves freely with the machine unthreaded. If it does, carefully rethread the machine and reinsert the bobbin, making sure the bobbin thread is feeding the correct direction. Let us know what happens.

Oct 23, 2016 | Singer 7442 Mechanical Sewing Machine

1 Answer

I push the peddle down and all I get is beeping what is wrong with my 7442 singer


I would call Singer at 1-800-4singer and find out. I looked up your manual at www.singerco.com for free and don't see any mention of a beeping sound except on page 28. Your machine is a computerized one, not mechanical.

Oct 21, 2010 | Singer 7442 Mechanical Sewing Machine

1 Answer

Cannot get bobbin winder to work on my Singer 7442. It will wind a 5 or 6 turns then the machine beeps and thenstops.


I am having the same problem - I've had my machine for 3 years and used it a lot. I'd love to hear if you get any solutions.

May 25, 2010 | Singer 7442 Mechanical Sewing Machine

1 Answer

Almost jammed


This sounds like a bearing failure, I would take it in to a service center and ask for a free estimate.

May 25, 2010 | Singer 7442 Mechanical Sewing Machine

1 Answer

How to attach Singer Free Motion/Darning Foot to Singer 7442 machine?


To learn the skills to repair sewing machine by yourself, I suggest you to order the following product:
Sewing Machine Repair Guide
It's a professional step-by-step repair guide written by an expert. Besides Singer sewing machine, you can learn how to repair other brands of sewing machine as well. The author claims that you can earn money after you had learned the repair skills!
Good luck.

Oct 15, 2008 | Singer 7442 Mechanical Sewing Machine

1 Answer

Needle position jammed?


First make sure you are using a needle that is recommended by your model. Secondly make sure the needle is inserted correctly. The flat side of the needle needs to be against the flat bar that makes the needle go up and down. After this, unplug the power supply and let it set for a couple of minutes. This gives the computer time to re-set itself.
Hope these suggestions work!
Zelma

Jan 19, 2008 | Singer 7442 Mechanical Sewing Machine

1 Answer

Singer 7442 is Loud!


Check to see that lint or oil has not collected on the hook or needle bar. Always use a good quality sewing machine oil. A damaged needle can also be the cause of a noisy machine - insert a new needle.

Nov 21, 2007 | Singer 7442 Mechanical Sewing Machine

Not finding what you are looking for?
Singer 7444 Mechanical Sewing Machine Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1128 Answers

Cindy Wells

Level 3 Expert

5127 Answers

mystery_soul

Level 1 Expert

41 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...