An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: new canon printer. can't figure out how to get the...
Go here, to drivers & downloads tab, and you'll be able to download a user's guide or manual that will explain in detail how to change a print cartridge for your printer.
I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread. If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Get steps to Fix Canon Printer Error Code B200 instantly. Watch below video to learn how to fix Error Code B200 on PIXMA Printer Call now +44-8000465291 for instant Printer help. Source: https://goo.gl/xskzcB
For 4+ Cartridge Printers:
Step1:-Remove All Printer Cartridges.
Do remove the individual ink cartridges from your printer. This will be opening the lid of your printer and waiting for the cartridge cradle to be placed in the correct position. Step2:-Remove the Print-head.
This is can be done by lifting the orange or gray locking lever on the side of the cartridge cradle and then gently lifting the print-head from the printer.
Get full Step by click below link
you have something blocking the laser. if you remove the cartridge, look behind where it sits and you'll see a small line of glass going across. here you'll find its either covered in toner at the side your missing print or there is a ripped piece of paper. clean with a clean cloth or air duster
There will be something covering a small patch of the laser mirror. Find the laser mirror inside the machine (Normally above where the cartridge sits) and wipe this with a clean cloth. Other than taking the cartridge out there is no dissassembly required.
OK now this might seem bizarre, but did you go ahead and click the "Black Only" print option?
I have a C6180. Just installed all new cartridges. Tried to print and got the message that Cyan is empty. Tried all sorts of things. Then out of frustration clicked the Black Onl option. Document came out printed in color! Double checked with a picture that has lots of cyan colors. It all printed too! Go figure.
There is a flat piece of plastic with a clear plastic sheet attached. This is suppose to pulled out all the way and disposed of before you install the cartridge. This is there for shipping so toner doesn't go everywhere. The box it came in should have some instructions. If you have already done this and it still is too big, then something is wrong as that is the right cartridge. So if you have done all this and it still doesn't fit, take the cartridge back and get another. One thing you can do to help you decide what is wrong is to pull out another cartridge from your machine and compare it with the one you have. What do see that is different? All colors will fit in each others slot however they will not work unless they are in the proper slot. A service technician can make them work in any slot for testing but beyond the scope of this question. A user cannot. Please compare your black cart with one of the others I am sure this will help you figure it out.
Installing the print cartridges
Follow the instructions below to install the print cartridges:
CAUTION: Do not touch the print cartridge ink nozzles or copper contacts. Touching these parts will result in clogs, ink failure, and bad electrical connections. Do not remove the copper strips. They are required electrical contacts.
Remove the print cartridge from its packaging and carefully remove the plastic tape from the copper strip.
Figure 2: Removing the plastic tape
With the power on, open the printer's top cover. The cradle moves to the center of the printer.
Hold the print cartridge so that the copper strip is on the bottom.
Figure 3: Holding the print cartridge
Insert the cartridge into the cradle at a slight upward angle until you feel resistance.
Figure 4: Inserting the print cartridge
Firmly push the cartridge into the cradle. You will hear a snapping sound when the print cartridge is correctly positioned. The print cartridge fits securely in its cradle.
Figure 5: Print cartridge in correct position
Close the top cover.
Calibrate the printer for optimum print quality.
Best of luck!
Please follow the steps below to install the Cartridge:
Install or replace the print cartridges
Turn the printer on. The cartridge cradle will not move if the power is not on.
Open the printer cover.
Figure 1: Printer cover open
Wait until the print cartridge cradle moves to the center of the printer and is
idle and quiet.
you are replacing a print cartridge, press down on the print cartridge
to be replaced, and then slide it out of the print cartridge cradle. If
you are installing print cartridges for the first time, go to the next
HP recommends using a print cartridge protector to store an opened print cartridge for later use.
Figure 2: Print cartridge being inserted into a print cartridge protector
Remove the new print cartridge from its packaging and carefully remove
the plastic tape. Hold the print cartridge so that the copper strips are on the
bottom and facing toward the printer.
Figure 3: Removing the protective tape CAUTION:
Do not touch the print cartridge ink nozzles or copper contacts.
Touching these parts will result in clogs, ink failure, and bad electrical
connections. Do not remove the copper strips. They are required electrical
Figure 4: Print cartridge facing up1 - Ink nozzles2 - Copper contacts
Slide the print cartridge at a slight upward angle into the cradle until the cartridge
snaps into place.
Figure 5: Installing the print cartridge
Repeat steps 3-4 for the remaining print cartridge.
Close the printer cover.
The printer automatically prints a calibration page.
Hi there maximum time we found it is a the head problem. The print head is what the cartridges sit in inside of the printer. For resolve the problem please follow these.
Open the printer and wait for the carriage to slide over. Some how if its not come then Unplug the printer & Manually slide the carriage. Now Remove the ink cartridges from the print head & Use wet warm cotton swab or use alcohol to thoroughly clean the print head. Repeat this until there is no ink residue coming off on the cotton swab. After finished it make the head dry then fix it back. Now Try to print something now
If that does not work then follow the next step.
Remove the printer data cable & restart the PC & printer. Then fit back the data cable & turn on the printer. Hope that's start working , if no luck then Uninstall the printer driver & restart the PC & Printer both again. Now install the driver of the printer and connect it with PC ,Turn on printer & go for a test print from the printer preference. Thanks & waiting for your reply.
This document provides information about replacing the print cartridge for the HP LaserJet 1010 printer series, including life expectancy and replacement instructions.
Print cartridge life expectancy
The life of the print cartridge depends on the amount of toner that your print jobs require. When printing text on letter/A4-size paper at five percent coverage, the print cartridge lasts an average of 2,000 pages. This assumes that you set the print density to three and disable EconoMode. (These are the default settings.) See Ordering supplies for information on ordering replacement print cartridges.
Changing the print cartridge
Follow the below instructions to change the print cartridge:
Open the print cartridge door, and remove the old print cartridge. See the recycling information inside the print cartridge box.
Figure 1: Removing old print cartridge
To prevent damage, do not expose the print cartridge to light. Cover it with a piece of paper.
Remove the new print cartridge from the packaging, and gently shake it from side to side to distribute the toner evenly inside the cartridge.
Figure 2: Gently shaking new print cartridge
Pull the tab until all the tape is removed from the print cartridge. Put the tab in the print cartridge box to return for recycling.
Figure 3: Removing tape from print cartridge
Insert the print cartridge in the printer, making sure that the print cartridge is in position. Close the print cartridge door.
Figure 4: Inserting new print cartridge