Question about Avent Express 6 Bottle Steam Sterilizer

Open Question

Avent steriliser will not start..when i choose function 1 or 2 and hold in the botton and release it just goes back to 0..any ideas on how to fix it please

Sterilizer wont start when switched on

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 286 Answers

SOURCE: Hi. I bought a Philips

first of all have you check the fuse in the plug


otherwise here is the contact details not sure if i have the country correct I put in greece/english but you can change at the top of page

http://www.support.philips.com/support/contact/contact_page.jsp;jsessionid=DB484F327F9A8A166463A0ED12878AC0.app107-drp1?userCountry=gr&userLanguage=en

Posted on Nov 01, 2010

Ad
Dorel UK
  • 1629 Answers

SOURCE: can you take the avent sterilizer apart???? every time we use it has dirt grity stuff on the bottom?? is this normal???

Hi
Avent is now part of the Philips group. We recommend you contact them to discuss http://www.philips.co.uk/c/about-philips-avent/19623/cat/

Posted on Jul 06, 2012

  • 6771 Answers

SOURCE: My avent iQ24 electronic sterilizer is not working, it was missplugged to 220volts,can i still have it repaired?

No! have it replaced, my experience has shown that to much damage is caused by to higher voltage destroying sensitive parts making it very expensive if not impossible to repair.

Posted on Jul 21, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi. I bought a Philips Avent Digital Steam Steriliser about 3 monts ago but it's not working now. No light on it, no function. Is there any tecnical service of Philips ın Cyprus for Philips...


first of all have you check the fuse in the plug


otherwise here is the contact details not sure if i have the country correct I put in greece/english but you can change at the top of page

http://www.support.philips.com/support/contact/contact_page.jsp;jsessionid=DB484F327F9A8A166463A0ED12878AC0.app107-drp1?userCountry=gr&userLanguage=en

Nov 01, 2010 | Avent Express 6 Bottle Steam Sterilizer

1 Answer

My philips avent 1q24 electronic steam wont come on


Most likly a bad capacittor on the little circuit board inside the unit. As it is thermosealed you cant open it without voiding the warranty. The repair however is fairly simple and anyone with rudamentary electronics experience can fix it for you. If you are still having problems let me know on devar11@yahoo.com

Apr 11, 2010 | Philips Baby Care

1 Answer

I have a Canon i950 printer and I'm getting a warning message that the waste ink tank is almost full. Is this an expensive fix?


Hi there ok this should do it
Start with the printer OFF

1. Hold down RESUME and then hold down POWER
2. Release RESUME
3. Press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing

Select function with RESUME press POWER to execute:
presses - light color - function

Number of presses - light color - function
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i950)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter

All the Best Pineworks

Feb 15, 2010 | Canon i950 InkJet Photo Printer

1 Answer

Error code 300. How fix


Do the EEPROM initialize reset;

Start with the printer OFF
1. Hold down RESUME and then hold down POWER
2. release RESUME
3. press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing
Select function with RESUME press POWER to execute:
presses - light color - function
Number of presses - light color - function

0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

May 01, 2009 | Office Equipment & Supplies

1 Answer

Canon i950 won't print


try this Probably your waste ink counter. Should be cleaned or replaced before resetting but usually you can get away with resetting once.
1. Start with printer OFF
2. Hold down RESUME and then hold down POWER
3. Release RESUME
4. press RESUME twice, then release POWER
5. let green light blink until printhead has finished moving.
6. Select functions below with RESUME, execute with POWER

0 presses - green light - Test Print (exit service for i960)
1 press - orange light - EEPROM info print
2 presses - green light - EEPROM initialise
3 presses - orange light - reset waste ink counter.

one by one

Jan 25, 2009 | Canon i9900 InkJet Photo Printer

1 Answer

Error SC 541


Try this... Press the Yellow reset botton then the number "1" then "0" then "8", don't hold them down, just push each botton once. Then hold down the "Stop/Clear" botton till the display changes to service mode, then turn the main Power Switch OFF then back On and see if it warm up.... If it dose not warm up you may have a problem with the fixing unit.... Good Luck

Sep 19, 2008 | Gestetner DSM 651 Copier

1 Answer

Canon i950 flashing orange green orange green


Start with the printer OFF

1. Hold down RESUME and then hold down POWER
2. Release RESUME
3. Press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing

Select function with RESUME press POWER to execute:
presses - light color - function

Number of presses - light color - function
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i950)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter

Aug 22, 2008 | Canon i950 InkJet Photo Printer

1 Answer

SC550


You can try to clear the code by doing this press the yellow all clear botton, then press 1-0-7, then hold the stop botton for 3 sec. or till screen changes. Then turn the copier off then back on. It is a generic fix for all Ricoh copiers

Jun 18, 2008 | Ricoh Office Equipment & Supplies

5 Answers

Service code SC546 on a Ricoh Aficio 1045


Try to go into service mode to reset the code...
Clear yellow botton
1
0
7
then press and hold the red stop botton till the display changes and then turn the main Power switch Off then back ON... You do not have to do any thing in service mode, just get to that display.... Don't change anything unless you know what you are doing. sc546 has to do with the fixing unit. You may be able to reset it.

Jun 03, 2008 | Computers & Internet

Not finding what you are looking for?
Avent Express 6 Bottle Steam Sterilizer Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Avent Baby Care Experts

ray gallant

Level 3 Expert

52175 Answers

Tom Chichester

Level 3 Expert

45144 Answers

masud
masud

Level 3 Expert

575 Answers

Are you an Avent Baby Care Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...